Building Envelope Thermal Mass and Its Effect on Spring and the Autumn Seasonal Transition Period
Publication: Journal of Architectural Engineering
Volume 26, Issue 2
Abstract
Increases in fossil fuel usage and energy consumption have become important issues in most countries of the world. Recent statistics show that the building sector is the main contributor to the world total energy consumption, which makes it responsible for a significant amount of greenhouse gas emissions. Several studies have been carried out to design buildings focusing on reducing their energy consumption and improving occupants’ comfort. This study focused on the impact of parameters influencing the seasonal transition periods (STPs) and annual energy consumption through numerical simulations in residential buildings. For this purpose, the thermal performance of six different wall constructions with similar U values under different ventilation rates was investigated. In addition, the effect on building heating and cooling loads during spring and autumn STPs in buildings with diurnal occupation patterns in hot, arid climates was studied. A small building located in Tehran, Iran, was selected as a case study model and simulated as the reference building. The results showed that Wall 4 with an effective surface mass of 249 kg/m2 had the best performance in reducing energy consumption and had a significant effect on STPs. When Wall 2’s ventilation rate reached 10 ach (air changes per hour), its impact on STPs was significant within the 60 days of the autumn transition period. The effect of natural ventilation on STPs was minimal for Wall 4. It was also found that a 5 ach ventilation rate was the most appropriate for this period.
Get full access to this article
View all available purchase options and get full access to this article.
References
Al-Sanea, S. A., and M. F. Zedan. 2011. “Improving thermal performance of building walls by optimizing insulation layer distribution and thickness for same thermal mass.” Appl. Energy 88 (9): 3113–3124.
Al-Sanea, S. A., M. Zedan, and S. A. Al-Ajlan. 2005. “Effect of electricity tariff on the optimum insulation-thickness in building walls as determined by a dynamic heat-transfer model.” Appl. Energy 82 (4): 313–330.
Al-Sanea, S. A., M. Zedan, and S. N. Al-Hussain. 2012. “Effect of thermal mass on performance of insulated building walls and the concept of energy savings potential.” Appl. Energy 89 (1): 430–442.
Al-Sanea, S. A., M. Zedan, and S. N. Al-Hussain. 2013. “Effect of masonry material and surface absorptivity on critical thermal mass in insulated building walls.” Appl. Energy 102: 1063–1070.
Annual Energy Outlook. 2010. Energy information administration. Washington, DC: Department of Energy 2010 (9): 1–15.
Asan, H. 1998. “Effects of wall’s insulation thickness and position on time lag and decrement factor.” Energy Build. 28 (3): 299–305.
Betts, A. K. 2011. “Seasonal climate transitions in New England.” Weather 66 (9): 245–248.
Bloomfield, D., and D. J. Fisk. 1977. “The optimisation of intermittent heating.” Build. Environ. 12 (1): 43–55.
Building and Housing Research Center (BHRC). 2011. Code No.19: Energy Efficiency. Bureau for Compiling and Promoting National Regulations for Buildings: Ministry of Housing and Urbanism. Tehran: Ministry of Housing and Urbanism.
Crawley, D. B., L. K. Lawrie, F. C. Winkelmann, W. F. Buhl, Y. J. Huang, C. O. Pedersen, and M. J. Witte. 2001. “Energyplus: Creating a new-generation building energy simulation program.” Energy Build. 33 (4): 319–331.
Csáky, I., and F. Kalmár. 2017. “Investigation of the relationship between the allowable transparent area, thermal mass and air change rate in buildings.” J. Build. Eng. 12: 1–7.
Di Perna, C., F. Stazi, A. U. Casalena, and M. D’Orazio. 2011. “Influence of the internal inertia of the building envelope on summertime comfort in buildings with high internal heat loads.” Energy Build. 43 (1): 200–206.
Elizabethtown College. 2007. “Air conditioning to Heating—Fall edition.” Accessed March 2017. http://www.etown.edu/offices/facilities-management/files/air-conditioning-heating-transition.pdf.
EnergyPlus. n.d. “Weather data—Tehran-Mehrabad 407540 (ITMY).” Accessed March 2017. https://energyplus.net/weather-location/asia_wmo_region_2/IRN//IRN_Tehran-Mehrabad.407540_ITMY.
Gagliano, A., F. Patania, F. Nocera, and C. Signorello. 2014. “Assessment of the dynamic thermal performance of massive buildings.” Energy Build. 72: 361–370.
Gregory, K., B. Moghtaderi, H. Sugo, and A. Page. 2008. “Effect of thermal mass on the thermal performance of various Australian residential constructions systems.” Energy Build. 40 (4): 459–465.
Houssin, D., and M. LaFrance. 2013. Transition to sustainable building: Strategies and opportunities to 2050. Paris: International Energy Agency.
Imessad, K., L. Derradji, N. A. Messaoudene, F. Mokhtari, A. Chenak, and R. Kharchi. 2014. “Impact of passive cooling techniques on energy demand for residential buildings in a Mediterranean climate.” Renewable Energy 71: 589–597.
Intergovernmental Panel on Climate Change. 2015. Climate change 2014: mitigation of climate change, Vol. 3. Cambridge: Cambridge University Press.
ISO. 2007. Building materials and products—hydrothermal properties—tabulated design values and procedures for determining declared and design thermal values. ISO 10456. Geneva, Switzerland: ISO.
Kalogirou, S. A., G. Florides, and S. Tassou. 2002. “Energy analysis of buildings employing thermal mass in Cyprus.” Renewable Energy 27 (3): 353–368.
Karlsson, J., L. Wadsö, and M. Öberg. 2013. “A conceptual model that simulates the influence of thermal inertia in building structures.” Energy Build. 60: 146–151.
Kossecka, E., and J. Kosny. 2002. “Influence of insulation configuration on heating and cooling loads in a continuously used building.” Energy Build. 34 (4): 321–331.
Kubota, T., D. T. H. Chyee, and S. Ahmad. 2009. “The effects of night ventilation technique on indoor thermal environment for residential buildings in hot-humid climate of Malaysia.” Energy Build. 41 (8): 829–839.
Mavromatidis, L. E., M. E. Mankibi, P. Michel, and M. Santamouris. 2012. “Numerical estimation of time lags and decrement factors for wall complexes including Multilayer Thermal Insulation, in two different climatic zones.” Appl. Energy 92: 480–491.
Memarian, S. 2016. “Studying factors affecting the duration of seasonal transition period in residential buildings.” Master thesis, Department of Architecture and Energy: University of Arts.
Memarian, S., B. M. Kari, R. Fayaz, and S. Asadi. 2018. “Single and combined phase change materials: Their effect on seasonal transition period.” Energy Build. 169: 453–472.
Navarro, L., A. de Gracia, D. Niall, A. Castell, M. Browne, S. J. McCormack, and L. F. Cabeza. 2016. “Thermal energy storage in building integrated thermal systems: A review. Part 2. Integration as passive system.” Renewable Energy 85: 1334–1356.
Ogoli, D. M. 2003. “Predicting indoor temperatures in closed buildings with high thermal mass.” Energy Build. 35 (9): 851–862.
Pérez-Lombard, L., J. Ortiz, and C. Pout. 2008. “A review on buildings energy consumption information.” Energy Build. 40 (3): 394–398.
Santamouris, M., A. Sfakianaki, and K. Pavlou. 2010. “On the efficiency of night ventilation techniques applied to residential buildings.” Energy Build. 42 (8): 1309–1313.
Sarkar, A., and S. Bose. 2016. “Exploring impact of opaque building envelope components on thermal and energy performance of houses in lower western Himalayans for optimal selection.” J. Build. Eng. 7: 170–182.
Seth, S., N. Bansal, J. Nayak, and A. Seth. 1981. “Optimum distribution of insulation and concrete in a multilayered wall of roof.” Appl. Energy 9 (1): 49–54.
Shaviv, E., A. Yezioro, and I. G. Capeluto. 2001. “Thermal mass and night ventilation as passive cooling design strategy.” Renewable Energy 24 (3–4): 445–452.
Ulgen, K. 2002. “Experimental and theoretical investigation of effects of wall’s thermophysical properties on time lag and decrement factor.” Energy Build. 34 (3): 273–278.
US Department of Energy. 2016. EnergyPlus documentation engineering reference: The reference to EnergyPlus calculations. Washington: United States Department of Energy.
Zhu, L., R. Hurt, D. Correia, and R. Boehm. 2009. “Detailed energy saving performance analyses on thermal mass walls demonstrated in a zero energy house.” Energy Build. 41 (3): 303–310.
Information & Authors
Information
Published In
Journal of Architectural Engineering
Volume 26 • Issue 2 • June 2020
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jul 26, 2018
Accepted: Aug 5, 2019
Published online: Mar 20, 2020
Published in print: Jun 1, 2020
Discussion open until: Aug 20, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.