Abstract
Glass exhibits brittle failure behavior. Therefore, redundancy is a fundamental design requirement when using glass as a main structural material. On this basis, a novel structural concept has been developed for hybrid glass-steel posttensioned triangulated structures, where the two materials collaborate. In forming such lattice structure, local fracture must be avoided. This paper presents a parametric study that highlights the influences of mechanical and geometrical parameters on the in-plane and out-of-plane static behaviour of laminated triangular glass panels. The resulting data set constitutes a useful source for the designer to select the most appropriate component. The main sensitivity parameters are panel length, laminate thickness, and interlayer stiffness.
Get full access to this article
View all available purchase options and get full access to this article.
References
Amadio, C., and C. Bedon. 2010. “Buckling of laminated glass elements in compression.” J. Struct. Eng. 137 (8): 803–810. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000328.
Bedon, C., and C. Louter. 2016. “Finite-element analysis of post-tensioned SG-laminated glass beams with mechanically anchored tendons.” Glass Struct. Eng. 1 (1): 39–59. https://doi.org/10.1007/s40940-016-0020-7.
Bedon, C., and C. Louter. 2017. “Finite element analysis of post-tensioned SG-laminated glass beams with adhesively bonded steel tendons.” Compos. Struct. 167 (May): 238–250. https://doi.org/10.1016/j.compstruct.2017.01.086.
Belis, J., D. Mocibob, A. Luible, and M. Vandebroek. 2011. “On the size and shape of initial out-of-plane curvatures in structural glass components.” Constr. Build. Mater. 25 (5): 2700–2712. https://doi.org/10.1016/j.conbuildmat.2010.12.021.
CNR (Consiglio Nazionale delle Ricerche). 2011. Istruzioni per la Progettazione, l’Esecuzione ed il Controllo di Strutture di Alluminio. CNR DT 208/2011. Rome: CNR.
Cupać, J., K. Martens, A. Nussbaumer, J. Belis, and C. Louter. 2017. “Experimental investigation of multi-span post-tensioned glass beams.” Glass Struct. Eng. 2 (1): 3–15. https://doi.org/10.1007/s40940-017-0038-5.
Eastman. 2017. “Product information bulletin Saflex® DG structural interlayer.” Accessed April 2, 2017. http://www.mepla.eu/media/medien/product-technical-sheet---saflex-dg_060415_9ab18.pdf.
Ebert, J. 2014. “Einleitung hoher Lasten in Glaskanten: Ein Beitrag zum Einsatz von Kunststoffen als Klotzungsmaterial.” Ph.D. thesis, Saechsische Landesbibliothek-Staats-und Universitaetsbibliothek Dresden.
Engelmann, M., and B. Weller. 2016. “Post-tensioned glass beams for a 9 m spannglass bridge.” Struct. Eng. Int. 26 (2): 103–113. https://doi.org/10.2749/101686616X14555428759000.
Englhardt, O. 2007. “Flächentragwerke aus Glas—Tragverhalten und Stabilität.” Ph.D. thesis, Univ. of Natural Resources and Life Sciences.
Englhardt, O., and K. Bergmeister. 2005. “Structural behaviour of plane glass surface structures under compression stress—Numerical and experimental investigation.” In Proc., Glass Processing Days. Tampere, Finland: Glaston Finland.
Feng, R. Q., Y. Jihong, and Y. A. Yao. 2015. “New type of structure: Glass cable truss.” J. Bridge Eng. 20 (12): 04015024. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000734.
Froli, M., and F. Laccone. 2018a. “Hybrid glass-steel stele (HYGLASS): Preliminary mechanical study on a smart tetrahelical cantilevering tall structure.” In Vol. 6 of Proc. Challenging Glass Conf., 611–616. Delft, Netherlands: TU Delft Open.
Froli, M., and F. Laccone. 2018b. “HYGLASS: Design proposal for an integrated multifunctional hybrid glass-steel structure.” Int. J. Struct. Glass Adv. Mater. Res. 2: 15–21. https://doi.org/10.3844/sgamrsp.2018.15.21.
Froli, M., and F. Laccone. 2018c. “Static concept for long-span and high-rise glass structures.” J. Archit. Eng. 24 (1): 04017030. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000285.
Froli, M., F. Laccone, and D. Maesano. 2017. “The TVT glass pavilion: Theoretical study on a highly transparent building made with long-spanned TVT portals braced with hybrid glass-steel panels.” Build. 7 (4): 50. https://doi.org/10.3390/buildings7020050.
Froli, M., and L. Lani. 2010. “Glass tensegrity trusses.” Struct. Eng. Int. 20: 436–441. https://doi.org/10.2749/101686610793557564.
Froli, M., and V. Mamone. 2014. “A 12 meter long segmented, post-tensioned steel-glass beam (TVT Gamma).” In Proc., Challenging Glass 4 and COST Action TU0905 Final Conf., 243–251. Rotterdam, Netherlands: A.A. Balkema.
Froli, M., G. Masiello, A. Melis, V. Mamone, and M. Giammattei. 2014. “The Energy Gallery: A pilot project in Pisa.” In Proc., Engineered Transparency. Int. Conf. at Glasstec, 621–628. Pisa, Italy: Univ. of Pisa.
Fuller, R. B. 1982. Synergetics: Explorations in the geometry of thinking. San Francisco: Estate of R. Buckminster Fuller.
Haarhuis, K., and T. Wever. 2016. “Glass-reinforced steel structures.” Glass Struct. Eng. 1 (1): 195–203. https://doi.org/10.1007/s40940-016-0021-6.
Haldimann, M., A. Luible, and M. Overend. 2008. Structural use of glass. Zürich: International Association for Bridge and Structural Engineering.
Huveners, E. M. P., F. Van Herwijnen, F. Soetens, and H. Hofmeyer. 2007. “Glass panes acting as shear wall.” Heron 52 (1/2): 5.
Ioannis, S. M., D. Simon, S. Nhamoinesu, and M. Overend. 2012. “Investigation of double-layer tensegrity glazing systems.” In Proc., IASS Annual Symp.—IASS-APCS 2012, Seoul.
Jordão, S., M. Pinho, J. P. Martin, A. Santiago, and L. C. Neves. 2014. “Behaviour of laminated glass beams reinforced with pre-stressed cables.” Steel Constr. 7 (3): 204–207. https://doi.org/10.1002/stco.201410027.
Kappraff, J. 2001. Vol. 25 of Connections: The geometric bridge between art and science. Singapore: World Scientific.
Kuraray Europe. 2017. “Bulletin edition 2: Kuraray structural and security glazing products—Making glass stronger.” Accessed April 2, 2017. https://www.trosifol.com/fileadmin/user_upload/TROSIFOL/support/downloads/bulletin/Bulletin_StructGlazing_4_2017_engl_web.pdf.
Louter, C., J. Belis, F. Veer, and J. P. Lebet. 2012. “Structural response of SG-laminated reinforced glass beams; experimental investigations on the effects of glass type, reinforcement percentage and beam size.” Eng. Struct. 36 (Mar): 292–301. https://doi.org/10.1016/j.engstruct.2011.12.016.
Louter, C., J. Cupać, and J. P. Lebet. 2014. “Exploratory experimental investigations on post-tensioned structural glass beams.” J. Facade Des. Eng. 2 (1–2): 3–18. https://doi.org/10.3233/FDE-130012.
Mamone, V. 2015. “Experimental, numerical and analytical investigations on the segmented post-tensioned hybrid steel-glass beams TVT.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Pisa.
Martens, K., R. Caspeele, and J. Belis. 2015a. “Development of composite glass beams—A review.” Eng. Struct. 101 (Oct): 1–15. https://doi.org/10.1016/j.engstruct.2015.07.006.
Martens, K., R. Caspeele, and J. Belis. 2015b. “Development of reinforced and posttensioned glass beams: Review of experimental research.” J. Struct. Eng. 142 (5): 04015173. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001453.
Martens, K., R. Caspeele, and J. Belis. 2016a. “Load-carrying behaviour of interrupted statically indeterminate reinforced laminated glass beams.” Glass Struct. Eng. 1 (1): 81–94. https://doi.org/10.1007/s40940-016-0017-2.
Martens, K., R. Caspeele, and J. Belis. 2016b. “Numerical investigation of two-sided reinforced laminated glass beams in statically indeterminate systems.” Glass Struct. Eng. 1 (2): 417–431. https://doi.org/10.1007/s40940-016-0005-6.
Memari, A. M., R. A. Behr, and P. A. Kremer. 2003. “Seismic behavior of curtain walls containing insulating glass units.” J. Archit. Eng. 9 (2): 70–85. https://doi.org/10.1061/(ASCE)1076-0431(2003)9:2(70).
Mocibob, D. 2008. “Glass panel under shear loading.” Ph.D. thesis, École Polytechnique Fédérale de Lausanne.
Pottmann, H. 2007. Vol. 10 of Architectural geometry. Exton, PA: Bentley Institute Press.
Silvestru, V., M. Zellinger, and O. Englhardt. 2013. “Hybrid glass structures for building skins—Actions and requirements.” In Proc., COST Action TU0905 Mid-Term Conf. on Structural Glass, 33–42. London: CRC Press.
Sobek, W. 2007. “Strutture in vetro.” Swiss Rev. Archit. Eng. Urban Plann.
Stepinac, M., V. Rajéic, L. Krstevska, and L. Tashkov. 2013. “Simulation of earthquake load imposed on timber—Glass composite shear wall panel.” In Proc., COST Action TU0905 Mid-term Conf. on Structural Glass, 245–252. Rotterdam, Netherlands: A.A. Balkema.
Štrukelj, A., B. Ber, and M. Premrov. 2015. “Racking resistance of timber-glass wall elements using different types of adhesives.” Constr. Build. Mater. 93 (Sep): 130–143. https://doi.org/10.1016/j.conbuildmat.2015.05.112.
Weller, B., S. Reich, and J. Ebert. 2008. “Testing on space grid structures with glass as compression layer.” In Proc., Challenging Glass Conf., 155–162. Amsterdam, Netherlands: IOS Press.
Weller, B., S. Reich, and J. Ebert. 2010. “Transparentes Raumstabwerk über dem Innenhof des Berliner Reichstagspräsidentenpalais.” Supplement, Stahlbau 79 (S1): 3–9. https://doi.org/10.1002/stab.201001301.
Weller, B., S. Reich, J. Ebert, and P. Krampe. 2009. “Testing for individual approval of a vault roof with in-plane loaded glass panes.” In Proc., Int. Association for Shell and Spatial Structures (IASS) Symp. 2009, 2990–3001. Valencia, Spain: Editorial Universitat Politecnica De Valencia.
Wellershoff, F. 2006. “Nutzung der Verglasung zur Aussteifung von Gebäudehüllen.” Ph.D. thesis, RWTH Aachen.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Mar 7, 2018
Accepted: Mar 28, 2019
Published online: Nov 21, 2019
Published in print: Mar 1, 2020
Discussion open until: Apr 21, 2020
ASCE Technical Topics:
- Analysis (by type)
- Building materials
- Composite materials
- Engineering fundamentals
- Engineering materials (by type)
- Failure analysis
- Fiber reinforced composites
- Geomatics
- Glass
- Laminated materials
- Materials engineering
- Mathematics
- Nonlinear finite element analysis
- Parameters (statistics)
- Statistics
- Structural analysis
- Structural behavior
- Structural engineering
- Surveying methods
- Triangulation
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.