Rapid Prototyping and Its Role in Supporting Architectural Design Process
Publication: Journal of Architectural Engineering
Volume 24, Issue 3
Abstract
Model making is a crucial part of the design development for evaluating the form, fit, and functionality of a design before a notable investment is made. The emergence of novel technologies and their increasing uptake are helping to redefine the architecture and the architects’ master builder role by altering the way architects think and make things. Different methods and strategies are available to utilize for the production of artifacts that are considered not only to be new communication and representation tools but also are being utilized for testing and evaluation during design processes. Rapid-prototyping processes are forming a language for use between different phases of the design and are considered as a feedback mechanism informing each other. This article presents the experimental research products of two rapid-prototyping technologies, focusing on how each technology can effectively be used in the delivery of design intent. Prototyping machines were used in testing the accuracy of the geometry of the design, in terms of protecting the design intent within the production process of each model. To verify the results of the experiment, researchers conducted semistructured interviews with the experts in the built environment, and a preliminary decision-making matrix was generated, aiming to provide guidance to the architectural designers on how to effectively use the current rapid-prototyping technologies within design processes.
Get full access to this article
View all available purchase options and get full access to this article.
References
De Bruijn, E. (2010). “On the viability of open source development model for the design of physical objects.” ⟨http://thesis.erikdebruijn.nl/master/MScThesis-ErikDeBruijn-2010.pdf〉.
Gibson, I., Kvan, T., and Ming, L. W. (2002). “Rapid prototyping for architectural models.” Rapid Prototyping J., 8(2), 91–95.
Klinger, K. R. (2001). “Making digital architecture: Historical, formal and structural implications of computer-controlled fabrication and expressive form.” Proc., Education in Computer Aided Architectural Design in Europe (eCAADe) Conference 2001: Architectural Information Management. Helsinki Univ. of Technology, Helsinki.
Kolarevic, B. (2003). Architecture in the digital age: Design and manufacturing, Taylor & Francis, Abingdon, U.K.
Lampugnani, V., and Millon, H. (1994). The Renaissance. Rizzoli, New York.
MayKa Expert 7.0 [Computer software]. PicaSoft, Vierzon, France.
Mellis, D. A. (2011). “Case studies in the digital fabrication of open source consumer electronic products.” M.S. thesis, Massachusetts Institute of Technology, Cambridge, MA.
Pham, D. T., and Gault, R. S. (1998). “A comparison of rapid prototyping technologies.” Int. J. Mach. Tools & Manuf., 38(10–11), 1257–1287.
Rhino 3D [Computer software]. Robert McNeel & Associates, Seattle.
Ryder, G., Ion, B., Green, G., Harrison, D., and Wood, B. M. (2002). “Rapid design and manufacture tools in architecture.” Autom. Constr., 11(3), 279–290.
Sanchez, J., Gonzalez, J., and Oyarbide, A. (2005). “Using rapid prototyping for free-form shapes in architectural scale models.” Proc., Int. Association for Shell and Spatial Structures, International Assoication for Shell and Spatial Structures, Madrid, Spain.
Sass, L., and Oxman, R. (2006). “Materializing design: The implications of rapid prototyping in digital design.” Des. Stud., 27(3), 325–355.
Seely, J. C. K. (2004). “Digital fabrication in the architectural design process.” M.S. thesis, Massachusetts Institute of Technology, Cambridge, MA.
Tomohiro, F., Tokuhara, T., and Yabuki, N. (2016). “A dynamic physical model based on a 3D digital model for architectural rapid prototyping.” Autom. Constr., 72(1), 9–17.
Tut, V., Tulcan, A., Cosma, C., and Serban, I. (2010). “Application of CAD/CAM/FEA, reverse engineering and rapid prototyping in manufacturing industry.” Int. J. Mech., 4(4), 79–86.
Van der Zee, A., de Vries, B., and Salet, T. A. M. (2014). “From rapid prototyping to automated manufacturing.” Proc., 32nd eCAADe Conf., Northumbria Univ., Newcastle upon Tyne, U.K., 445–461.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Feb 16, 2017
Accepted: Dec 8, 2017
Published online: Apr 30, 2018
Published in print: Sep 1, 2018
Discussion open until: Sep 30, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.