Higher Education on Buildings: Case Study in the North Dakota Region
Publication: Journal of Architectural Engineering
Volume 23, Issue 4
Abstract
Because of the growing demand for local skilled professionals to improve the health, energy efficiency, and sustainability of residential and commercial buildings in North Dakota, this case study reports the current situation of higher education relating to buildings in the state’s vicinity, including Minnesota, Montana, North Dakota, and South Dakota. In this region, 116 programs relating to buildings were found in 41 postsecondary institutions, and both their majors and courses were then studied with frequency lists. The frequency information was analyzed over nine sets of curriculum areas at both graduate and undergraduate levels for the four states. After the current state of buildings in North Dakota was investigated, strategies were then proposed to rectify current issues regarding higher education on buildings, including but not limited to forming a comprehensive and interdisciplinary program on buildings (e.g., architectural engineering), providing more graduate programs, developing more courses in areas that lack adequate coursework, and increasing student enrollment. These strategies will greatly promote the health, energy efficiency, and sustainability for new and existing buildings in the four-state region of Minnesota, Montana, North Dakota, and South Dakota.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABET. (2017). “ABET accredited program search.” 〈http://main.abet.org/aps/Accreditedprogramsearch.aspx〉 (Jan. 14, 2017).
ASHRAE. (2007). “Energy efficient design of low-rise residential buildings.” ANSI/ASHRAE/IES Standard 90.2-2007, American Society of Heating, Refrigerating and Air Conditioning Engineers, Atlanta, GA.
ASHRAE. (2016). “Energy standard for buildings except low-rise residential buildings.” ANSI/ASHRAE/IES Standard 90.1-2016, American Society of Heating, Refrigerating and Air Conditioning Engineers, Atlanta, GA.
Ayer, S. K., Messner, J. I., and Anumba, C. J. (2016). “Augmented reality gaming in sustainable design education.” J. Archit. Eng., 04015012.
Beaty, C. S., Waters, C. E., Dziuvenis, G. R., and Feldman, T. M. (2014). “Use of professional industry interaction to enhance engineering education.” J. Archit. Eng., 05014001.
Berardi, U., Pietroforte, R., and El-Korchi, T. (2014). “Acoustics and lighting education in architectural engineering: Experience of WPI.” J. Archit. Eng., 05013003.
Bloech, H. (2014). “Pioneering indoor air quality certification for buildings.” 〈http://newscience.ul.com/articles/pioneering-indoor-air-quality-certification-for-buildings〉 (Sep. 20, 2017).
EIA (U.S. Energy Information Administration). (2017). “State Energy Data System (SEDS): 1960-2015 (complete).” 〈http://www.eia.gov/state/seds/seds-data-complete.cfm?sid=US〉 (Jan. 14, 2017).
EPA. (2012). “The inside story: A guide to indoor air quality.” 〈http://www.epa.gov/iaq/pubs/insidestory.html〉 (Sep. 19, 2014).
Froyd, J., and Ohland, M. (2005). “Integrated engineering curricula.” J. Eng. Educ., 94(1), 147–164.
International Code Council. (2009). 2009 International energy conservation code, International Code Council, Inc., Washington, DC.
Jarosz, J. P., and Busch-Vishniac, I. J. (2006). “A topical analysis of mechanical engineering curricula.” J. Eng. Educ., 95(3), 241–248.
Kruss, G., McGrath, S., Petersen, I., and Gastrow, M. (2015). “Higher education and economic development: The importance of building technological capabilities.” Int. J. Educ. Dev., 43, 22–31.
Lin, T. (2004). “The role of higher education in economic development: An empirical study of Taiwan case.” J. Asian Econ., 15(2), 355–371.
Meulemeester, J. D., and Rochat, D. (1995). “A causality analysis of the link between higher education and economic development.” Econ. Educ. Rev., 14(4), 351–361.
Setareh, M., Bowman, D. A., Kalita, A., Gracey, M., and Lucas, J. (2005). “Application of a virtual environment system in building sciences education.” J. Archit. Eng., 165–172.
Setareh, M., Jones, B., Ma, L., Bacim, F., and Polys, N. (2015). “Application and evaluation of double-layer grid spatial structures for the engineering education of architects.” J. Archit. Eng., 04015005.
Tsai, F. C., and Macher, J. M. (2005). “Concentrations of airborne culturable bacteria in 100 large US office buildings from the BASE study.” Indoor Air, 15(s9), 71–81.
Waters, C. E., Alvine, S., and Eble-Hankins, M. (2012). “Industry-experienced graduate student program: Innovative collaboration in architectural engineering at the University of Nebraska, Lincoln.” J. Archit. Eng., 61–63.
Waters, C. E., and Moser, S. (2000). “Combined BS and MS degree program in architectural engineering.” J. Archit. Eng., 95–97.
Yoder, B. (2015). “Engineering by the numbers.” American Society for Engineering Education (ASEE) Annual Data Rep. 〈https://www.asee.org/papers-and-publications/publications/college-profiles/15EngineeringbytheNumbersPart1.pdf〉 (Sep. 20, 2017).
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Aug 4, 2016
Accepted: Jun 22, 2017
Published online: Oct 4, 2017
Published in print: Dec 1, 2017
Discussion open until: Mar 4, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.