Airside System–Type Prediction Enabled by Intelligent Pressure Independent Control Valves
Publication: Journal of Architectural Engineering
Volume 23, Issue 3
Abstract
Low delta T syndrome, that is, the operation at low differences between supply and return chilled-water temperatures, increases the energy consumption of chilled-water systems. Numerous causes of low delta T lie at the cooling coils. As the load on the coil increases, more chilled water is sent through it. A point of saturation is reached when significant increases in chilled-water flow result in negligible increases in provided cooling power. The ability to recognize when such saturation is occurring and restrict flow in such situations is needed to combat low delta T. An intelligent pressure independent control valve attempts this by measuring and logging inlet and outlet water temperatures and water flow rates. Through nonlinear regression of measured coil data, a novel approach for the valve to predict saturation was developed and tested. The resulting curve fit was then used to predict whether a coil was operating in a constant- or variable-air-volume system. In total, 128 test coils over four climates and various system characteristics showed a 79.7% correct prediction rate.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers). (2010). “Energy standard for buildings except low-rise residential buildings.” 90.1 (I-P), Atlanta.
ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers). (2013). ASHRAE handbook fundamentals (I-P ed.), Atlanta.
Bellucci, J. T. (2012). “Model development and experimental validation of pressure independent hydronic circuits.” M.S. thesis, Dept. of Civil, Environment and Architectural Engineering, Univ. of Colorado Boulder, Boulder, CO.
Buchanan, B. (2012). “Chilled water plant taxonomy and energy valve modeling.” M.S. thesis, Univ. of Colorado Boulder, Boulder, CO.
Elmahdy, A. H., and Mitalas, G. P. (1977). “A simple model for cooling and dehumidifying coils for use in calculating energy requirements for buildings.” ASHRAE Trans., 83(2), 103–117.
Everitt, B. S. (1998). The Cambridge dictionary of statistics, Cambridge Univ. Press, Cambridge, U.K.
Fiorino, D. (1999). “Achieving high chilled-water delta Ts.” ASHRAE J., 41(11), 24–30.
Henze, G. P., and Floss, A. G. (2011). “Evaluation of temperature degradation in hydraulic flow networks.” Energy Build., 43(8), 1820–1828.
Lindeburg, M. R. (2013). Mechanical engineering reference manual for the PE exam, 13th Ed., Professional Publications, Belmont, CA.
McQuiston, F. C., Parker J. D., and Spitler, J. D. (2005). Heating, ventilating, and air conditioning: Analysis and design, 6th Ed., Wiley, Hoboken, NJ.
Mitchell, J. W., and Braun, J. E. (2012). Principles of heating, ventilation, and air conditioning in buildings, Wiley, Hoboken, NJ.
Ryan, M. (2014). “Optimal control strategy selection for intelligent pressure independent control valves.” M.S. thesis, Dept. of Anthropology, Univ. of Colorado Boulder, Boulder, CO.
Maxima [Computer software]. SourceForge, La Jolla, CA.
Taylor, S. T. (2002). “Degrading chilled water plant delta-T: Causes and mitigation.” ASHRAE Trans., 108(1), 641–653.
Thuillard, M., Reider, F., and Henze, G. P. (2014). “Energy efficiency strategies for hydronic systems through intelligent actuators.” ASHRAE Trans., 120(1), 1–8.
U.S. Department of Energy. (2014). “Commercial prototype building models.” 〈http://www.energycodes.gov/commercial-prototype-building-models〉 (Mar. 17, 2014).
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Jul 20, 2016
Accepted: Mar 8, 2017
Published online: Jul 13, 2017
Published in print: Sep 1, 2017
Discussion open until: Dec 13, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.