Heat Transfer in Facade Systems and Energy Use: Comparative Study of Different Exterior Wall Types
Publication: Journal of Architectural Engineering
Volume 23, Issue 1
Abstract
This research article discusses methods for designing high-performance facades with a focus on minimizing heat transfer and improving energy usage. The facade is one of the most significant contributors to the energy budget and comfort parameters of any building. Control of physical environmental factors, including methods for minimizing heat transfer, must be considered during the design process. High-performance facades need to block adverse external environmental effects and maintain internal comfort conditions with minimal energy consumption. The research was conducted by initially modelling conductive heat transfer in four different exterior wall types, including a brick cavity wall, a rain-screen facade with terracotta cladding, a rain-screen facade with glass fiber–reinforced concrete cladding, and a curtain wall, to compare their relative thermal performances. Then, heat-transfer modelling was conducted for three thermally improved systems, including curtain walls with thermally broken framing, rain-screen facades with thermal spacers, and rain-screen facades with thermal isolators. Effects on energy use were also investigated; energy usage was modeled for an office space enclosed with the analyzed facade types for all U.S. climate zones. The results show the performance of analyzed exterior wall types in terms of thermal performance and energy usage.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aksamija, A. (2013). Sustainable facades: Design methods for high-performance building envelopes, John Wiley & Sons, Hoboken, NJ.
ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers). (2005). Handbook of fundamentals, Atlanta.
ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers). (2010). BSR/ASHRAE/IESNA 90.1-2010, energy standard for buildings except low-rise residential buildings, Atlanta.
Emmerich, S., McDowell, T., and Anis, W. (2005). “Investigation of the impact of commercial building envelope airtightness on HVAC energy use.” NISTIR 7238 Rep., National Institute of Standards and Technology, Gaithersburg, MD.
EnergyPlus 8.3 [Computer software]. U.S. Dept. of Energy, Washington, DC.
Huizenga, C., Zhang, H., Mattelaer, P., Yu, T., Arens, E., and Lyons, P. (2006). Window performance for human thermal comfort, Center for the Built Environment, Univ. of California, Berkeley, CA.
Lawton, M., Roppel, P., Fookes, D., Teasdale, A., and Schoonhoven, D. (2010). “Real R-value of exterior insulated wall assemblies.” Proc., BEST2 Conf.: Building Enclosure Science and Technology, National Institute of Building Sciences, Portland, OR.
Lee, E., Selkowitz, S., Bazjanac, V., Inkaroirit, V., and Kohler, C. (2002). “Higher-performance commercial building facades.” LBNL-50502 Rep., Environmental Energy Technologies Div., Lawrence Berkeley National Laboratory, Berkeley, CA.
Morrison Hershfield. (2011). “Thermal performance of building envelope details for mid- and high-rise buildings.” ASHRAE 1365-RP, Vancouver, CA.
NFRC (National Fenestration Rating Council). (2010). NFRC 100 procedure for determining fenestration product U-factors, Greenbelt, MD.
NREL (National Renewable Energy Laboratory). (2010). “National solar radiation data base 1991–2010 update.” 〈http://rredc.nrel.gov/solar/old_data/nsrdb/1991-2010/〉.
Oral, G., Yener, A., and Bayazit, N. (2004). “Building envelope design with the objective to ensure thermal, visual and acoustic conditions.” Build. Environ., 39(3), 281–287.
Ruck, N., et al. (2000). Daylight in buildings: A source book on daylighting systems and components, Lawrence Berkeley National Laboratory, Berkeley, CA.
THERM 6.3 [Computer software]. Lawrence Berkeley National Laboratory, Berkeley, CA.
Window 7.3.8 [Computer software]. Lawrence Berkeley National Laboratory, Berkeley, CA.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Nov 3, 2015
Accepted: Apr 29, 2016
Published online: Jun 29, 2016
Discussion open until: Nov 29, 2016
Published in print: Mar 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.