Green Building Rating Systems and Whole-Building Life Cycle Assessment: Comparative Study of the Existing Assessment Tools
Publication: Journal of Architectural Engineering
Volume 23, Issue 1
Abstract
There is a growing interest in integrating life cycle assessment (LCA) into building design decision making due to LCA’s comprehensive and systemic approach to environmental evaluation. Many green building rating systems (GBRSs) use LCA to various degrees. In this paper, a comparative study was performed to evaluate the LCA software tools available to building designers. A whole-building LCA was performed for a large building using three software LCA tools. The software tools vary in key aspects, such as intended users (e.g., LCA experts or novices), design stage in which they can be used, and time. The evaluated LCA tools varied significantly in the possibility of their use in early design and decision making. Some of the applications rely on a bill of materials that changes constantly in design alterations. However, others showed a greater advantage in that they can be integrated from the beginning of the design process. The comparative LCA results indicated that the impact of LCA software is dependent on the impact category and the precision in the process of material quantities takeoff. The case study was influenced by the building type and its intense operational energy requirements. Conventional energy efficiency measures, such as increasing the lighting efficiency, far exceeded what can be done to mitigate the embedded impact of construction materials. Thus, advancing the requirements of the LCA baseline building and addressing the operational phase in a more comprehensive framework are discussed. Finally, this paper examines the traditional building’s systems that are usually involved in LCA and the possibility of adding other systems, such as plumbing, HVAC, and electrical systems, using building information modeling (BIM).
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the University of Pittsburgh’s Mascaro Center for Sustainable Innovation for their support. This material is based upon work supported by the National Science Foundation under EFRI-SEED (1038139). Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.
References
ASHRAE (American Society of Heating and Refrigerating and Air-Conditioning Engineers)/ANSI (American National Standards Institute)/IESNA (Illuminating Engineering Society of North America). (2010). Standard 90.1-2010: Energy standard for buildings except low-rise residential buildings, ASHRAE, Atlanta, GA.
Athena Sustainable Materials Institute. (2016). “Our software and data.” 〈http://www.athenasmi.org/our-software-data/overview/〉 (Feb. 16, 2016).
Autodesk. (2016). “Products—Revit Family.” 〈http://www.autodesk.com/products/revit-family/subscribe〉 (Feb. 16, 2016).
Balaras, C. A., Dascalaki, E., and Gaglia, A. (2007). “HVAC and indoor thermal conditions in hospital operating rooms.” Energy Build., 39(4), 454–470.
Bare, J. C. (2002). Developing a consistent decision-making framework by using the U.S. EPA's TRACI, American Institute of Chemical Engineers, New York.
Becerik-Gerber, B., and Kensek, K. (2010). “Building information modeling in architecture, engineering, and construction: Emerging research directions and trends.” J. Prof. Issues in Engrg., 139–147.
BREEAM (Building Research Establishment Environmental Assessment Methodology). (2014). BREEAM new construction—Technical manual: Version: SD5073, Watford, U.K.
Buyle, M., Braet, J., and Audenaert, A. (2013). “Life cycle assessment in the construction sector: A review.” Renewable Sustainable Energy Rev., 26, 379–388.
Cabeza, L., Rincón, L., Vilariño, V., Pérez, G., and Castell, A. (2014). “Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: A review.” Renewable Sustainable Energy Rev., 29(4), 394–416.
CBSC (California Building Standards Commission). (2013). California green building standards code: California code of regulations, International Code Council, Sacramento, CA.
Earthshift. (2016). “SimaPro Pricing.” 〈http://www.earthshift.com/software/simapro/pricing〉 (Feb. 16, 2016).
Erlandsson, M., and Borg, M. (2003). “Generic LCA-methodology applicable for buildings, constructions and operation services—Today practice and development needs.” Build. Environ., 38(7), 919–938.
Fava, J. A. (2006). “Will the next 10 years be as productive in advancing life cycle approaches as the last 15 years?” Int. J. Life Cycle Assess., 11(S1), 6–8.
Frischknecht, R., et al. (2005). “The ecoinvent database: Overview and methodological framework.” Int. J. Life Cycle Assess., 10(1), 3.
Gallaher, M. P., O’Connor, A. C., Dettbarn, J. L., and Gilday, L. T. (2004). Cost analysis of inadequate interoperability in the U.S. capital facilities industry, U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, Gaithersburg, MD.
GaBi [Computer software]. Thinkstep, Echterdingen, Germany.
GBI (Green Building Initiative). (2014). Green globes for new construction—Technical reference manual, version 1.3, Portland, OR.
Green Building Studio [Computer software]. Autodesk, San Rafael, CA.
ICC (International Code Council). (2012). International green construction code: A member of the international code family, International Code Council, American Society of Heating Refrigerating Air-Conditioning Engineers, U. S. Green Building Council, Illuminating Engineering Society of North America, Country Club Hills, IL.
Impact Estimator for Buildings [Computer software]. Athena Sustainable Materials Institute, Ottawa, Ontario, Canada.
ISO (International Organization for Standardization). (1997). “Environmental management—Life cycle assessment: Principles and framework.” ISO 14044, Geneva.
ISO (International Organization for Standardization). (2006). “Environmental management—Life cycle assessment: Requirements and guidelines.” ISO 14040, Geneva.
Junnila, S., Horvath, A., and Guggemos, A. A. (2006). “Life-cycle assessment of office buildings in Europe and the United States.” J. Infrastruct. Syst., 10–17.
KT Innovations, Thinkstep, and Autodesk. (2016). “Tally download.” 〈http://choosetally.com/download/〉 (Feb. 16, 2016).
Lee, G., Sacks, R., and Eastman, C. M. (2006). “Specifying parametric building object behavior (BOB) for a building information modeling system.” Autom. Constr., 15(6), 758–776.
LCAiT [Computer software]. CIT Ekologik, Gothenburg, Sweden.
McGraw-Hill Construction. (2010). “Green BIM—How building information modeling is contributing to green design and construction.” SmartMarket Rep., Bedford, MA.
McGraw-Hill Construction. (2013). “World green building trends.” SmartMarket Rep., Bedford, MA.
NREL (National Renewable Energy Laboratory). (2010). US life-cycle inventory database (USLCI), Golden, CO.
Ortiz, O., Castells, F., and Sonnemann, G. (2009). “Sustainability in the construction industry: A review of recent developments based on LCA.” Constr. Build. Mater., 23(1), 28–39.
Revit [Computer software]. Autodesk, San Rafael, CA.
Rossi, B., Marique, A. F., Glaumann, M., and Reiter, S. (2012). “Life-cycle assessment of residential buildings in three different European locations, basic tool.” Build. Environ., 51, 395–401.
Scheuer, C., Keoleian, G. A., and Reppe, P. (2003). “Life cycle energy and environmental performance of a new university building: Modeling challenges and design implications.” Energy Build., 35(10), 1049–1064.
Sharaai, A. H., Mahmood, N. Z., and Sulaiman, A. H. (2010). “Life cycle impact assessment (LCIA) using TRACI methodology: An analysis of potential impact on potable water production.” Aust. J. Basic Appl. Sci., 4(9), 4313–4322.
SimaPro [Computer software]. PRé Sustainability, Amersfoort, The Netherlands.
Tally [Computer software]. KieranTimberlake, Philadelphia.
TEAM [Computer software]. PwC—Ecobilan, Neuilly-sur-Seine, France.
UPMC (University of Pittsburg Medical Center). (2015). “Magee-Womens Hospital of UPMC.” 〈http://www.upmc.com/locations/hospitals/Magee/Pages/default.aspx〉 (April 6, 2015).
U.S. DOE. (2008). “EnergySmart hospitals: Creating energy efficient, high performance hospitals.” 〈http://apps1.eere.energy.gov/buildings/publications/pdfs/energysmarthospitals/esh_factsheet.pdf〉 (Apr. 6, 2015).
U.S. EIA (Energy Information Administration). (2003). Commercial buildings energy consumption survey (CBECS), Office of Integrated Analysis and Forecasting, U.S. Dept. of Energy, Washington, DC.
U.S. EIA (Energy Information Administration). (2012a). Annual energy outlook, Office of Integrated Analysis and Forecasting, U.S. Dept. of Energy, Washington, DC.
U.S. EIA (Energy Information Administration). (2012b). Commercial buildings energy consumption survey (CBECS), Office of Integrated Analysis and Forecasting, U.S. Dept. of Energy, Washington, DC.
U.S. EPA. (2012). “Plant level data.” eGRID 2012 V 1.0 - with year 2009 data, Washington, DC.
USGBC (U.S. Green Building Council). (2009). LEED reference guide for green building design and construction, Washington, DC.
USGBC (U.S. Green Building Council). (2013). LEED reference guide for building design and construction, LEED v4.0, Washington, DC.
U.S. News & World Report. (2015). “Best hospitals—Top ranked hospitals for gynecology: Magee-Womens Hospital of UPMC.” 〈http://health.usnews.com/best-hospitals/area/pa/magee-womens-hospital-of-upmc-6232460/gynecology〉 (Apr. 6, 2015).
van der Lugt, P., van den Dobbelsteen, A. A. J. F., and Janssen, J. J. A. (2006). “An environmental, economic and practical assessment of bamboo as a building material for supporting structures.” Constr. Build. Mater., 20(9), 648–656.
Wu, H. J., Yuan, Z. W., Zhang, L., and Bi, J. (2012). “Life cycle energy consumption and CO2 emission of an office building in China.” Int. J. Life Cycle Assess., 17(2), 105–118.
Zabalza Bribián, I., Valero Capilla, A., and Aranda Usón, A. (2011). “Life cycle assessment of building materials: Comparative analysis of energy and environmental impacts and evaluation of the eco-efficiency improvement potential.” Build. Environ., 46(5), 1133–1140.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Dec 4, 2015
Accepted: Apr 26, 2016
Published online: Jul 11, 2016
Discussion open until: Dec 11, 2016
Published in print: Mar 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.