Success of Commercial Building Retuning in Federal Buildings: Results and Case Studies
Publication: Journal of Architectural Engineering
Volume 23, Issue 1
Abstract
Retuning is a form of scaled-down retrocomissioning for commercial buildings that targets low- and no-cost control changes to building automation systems (BASs) to achieve immediate energy savings. A retrospective analysis of retuning for a set of 26 federal office buildings and courthouses is presented, detailing the retuning process that was employed, the types of retuning measures that were commonly implemented, the most effective of those measures, and the energy and cost savings achieved as a result of the process. The buildings that participated in these retuning efforts were benchmarked as having, on average, very efficient baselines. However, these buildings achieved, on average, 12.1% annual energy savings as a result of the retuning efforts, with an associated cost savings of $1.62/year per square meter ($0.151/year per ft2) of floor space. Several key factors that are observed to promote successful retuning outcomes are discussed as well.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Recovery and Reinvestment Act (ARRA). (2009). 〈http://www.recovery.gov/arra/About/Pages/The_Act.aspx〉 (Aug. 5, 2015).
ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers). (2010). ASHRAE GreenGuide: The design, construction, and operation of sustainable buildings, 3rd Ed., Atlanta.
ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers). (2013). “Ventilation for acceptable indoor air quality.” ANSI/ASHRAE Standard 62.1-2013, Atlanta.
Brambley, M. R., and Katipamula, S. (2009). “Retuning commercial buildings: A low-cost way to improve energy performance.” ASHRAE J., 51(10), 12–23.
EIA (Energy Information Administration). (2003). “Table E1. Major fuel consumption (Btu) by end use for non-mall buildings, 2003.” 〈http://www.eia.gov/consumption/commercial/data/archive/cbecs/cbecs2003/detailed_tables_2003/2003set19/2003html/e01.html〉 (Aug. 4, 2015).
Energy Design Resources. (2009). “Advanced variable air volume VAV system design guide.” 〈http://www.energydesignresources.com/media/2651/EDR_DesignGuidelines_VAV.pdf〉 (June 5, 2012).
EnergyPlus 8.1. [Computer software]. U.S. Dept. of Energy, Washington, DC.
Executive Order 13514. (2009). “Federal leadership in environmental, energy, and economic performance.” Federal Register, 74(195). 〈http://www.gpo.gov/fdsys/pkg/FR-2009-10-08/pdf/E9-24518.pdf〉 (Aug. 2, 2015).
Fernandez, N., Katipamula, S., and Underhill, R. M. (2015). “Optimizing control of dedicated outdoor air systems with energy recovery in commercial buildings.” PNNL-ACT-SA-10075, Pacific Northwest National Laboratory, Richland, WA.
Fernandez, N., Katipamula, S., Wang, W., Huang, Y., and Liu, G. (2014). “Energy savings modelling of retuning energy conservation measures in large office buildings.” J. Build. Perform. Simul., 8(6), 391–407.
PNNL (Pacific Northwest National Laboratory). (2015). “Retuning commercial buildings: A low-cost path to energy efficiency and cost savings.” 〈http://buildingretuning.pnnl.gov/〉 (Aug. 17, 2015).
Schwedler, M. (2012). “Condenser water system savings.” Engineers Newsletter, Vol. 41-3. 〈https://www.trane.com/content/dam/Trane/Commercial/global/products-systems/education-training/engineers-newsletters/waterside-design/adm-apn045-en_0912.pdf〉 (July 29, 2015).
Taasevigen, D. J. (2011a). “Building retuning training guide: AHU static pressure control.” PNNL-SA-84187, Pacific Northwest National Laboratory, Richland, WA. 〈http://buildingretuning.pnnl.gov/documents/pnnl_sa_84187.pdf〉 (Aug. 1, 2015).
Taasevigen, D. J. (2011b). “Building retuning training guide: AHU discharge-air temperature control.” PNNL-SA-84186, Pacific Northwest National Laboratory, Richland, WA. 〈http://buildingretuning.pnnl.gov/documents/pnnl_sa_84186.pdf〉 (Aug. 2, 2015).
Taasevigen, D. J. (2011c). “Building retuning training guide: Air-side economizer control.” PNNL-SA-86706, Pacific Northwest National Laboratory, Richland, WA. 〈http://buildingretuning.pnnl.gov/documents/pnnl_sa_86706.pdf〉 (Aug. 11, 2015).
Taasevigen, D. J. (2011d). “Building retuning training guide: Central utility plant cooling control.” PNNL-SA-89198, Pacific Northwest National Laboratory, Richland, WA. 〈http://buildingretuning.pnnl.gov/documents/pnnl_sa_89198.pdf〉 (July 25, 2015).
Thamilseran, S., and Haberl, J. S. (1994). “A bin method for calculating energy conservation retrofit savings in commercial buildings.” Proc., 9th Symp. on Improving Building Systems in Hot and Humid Climates, Texas Building Energy Institute, San Antonio, 142–152.
U.S. DOE and U.S. EPA. (2015). “Energy Star for existing buildings.” 〈http://www.energystar.gov/buildings/facility-owners-and-managers/existing-buildings〉 (July 29, 2015).
U.S. GSA (General Services Administration). (2010). “Section 5.18: Building Automation Systems; Automatic Temperature and Humidity Controls.” Facilities Standards for the Public Building Service (P100), Washington, DC, 163.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Aug 28, 2015
Accepted: Feb 2, 2016
Published online: Mar 29, 2016
Discussion open until: Aug 29, 2016
Published in print: Mar 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.