Development and Implementation of Lighting and Shading Control Algorithms in an Airport Building
Publication: Journal of Architectural Engineering
Volume 18, Issue 3
Abstract
This paper presents the development and implementation of shading and lighting control schemes in an airport building. The airport has several perimeter zones with large glass facades that receive excessive solar gains throughout the year. Starting from a large southwest zone, illuminance sensors were installed in strategic positions and interior daylight levels were monitored under various sky conditions and shade positions. Analysis of the results allowed derivation of reliable correlations between ceiling and work plane illuminances, which were used to develop control schemes for shading and lighting operation. After successful implementation, the project moved to the next phase, which included all the perimeter zones in the airport. In this phase, only one sensor was installed on the ceiling of each zone, and illuminance levels were predicted using simulation models and validated with a few manual measurements. The developed control schemes were implemented in all perimeter zones of the airport. The study also includes simulation results for the potential energy savings owing to reduced lighting and cooling energy demand.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by Montreal Airports (ADM), Natural Resources Canada (NRCan), and the Canadian Solar Buildings Research Network (SBRN), a strategic Natural Sciences and Engineering Research Council of the Canada Research Network. Special thanks are given to Mr. Denis Boilard, Project Engineer, ADM; Mr. Etienne Therrien, Project Manager, ADM; Mr. Meli Stylianou, Project Leader, Intelligent Buildings Technologies Team, NRCan/Canmet Energy Technology Center, Varennes, Quebec and SBRN Manager; Dr. Andreas Athienitis, Scientific Director of SBRN, Professor and Concordia University Research Chair; Mr. Francois Dubrous, Project Leader, Sustainable Buildings & Communities Group, NRCan; and Mr. Brendan O’Neill and Mr. Costas Kapsis, graduate students at Concordia University, Montreal.
References
Architectural Energy Corporation (AEC). (2008). SPOT version 4 manual, AEC, Boulder, CO.
Kiliccote, S., Piette, M. A., Watson, D. S., and Hughes, G. D. (2006). “Dynamic controls for energy efficiency and demand response: Framework concepts and a new construction study case in New York.” Proc., 2006 ACEEE Summer Study on Energy Efficiency in Buildings, Pacific Grove, CA, Lawrence Berkeley National Laboratory, Berkeley, CA.
Lee, E. S. et al. (2007). “Daylighting the New York Times headquarters building: Commissioning daylighting systems and estimation of demand response.” Final Rep. to the New York State Energy Research and Development Authority, Lawrence Berkeley National Laboratory, Berkeley, CA.
Lee, E. S., DiBartolomeo, D. L., and Selkowitz, S. E. (1998). “Thermal and daylighting performance of an automated venetian blind and lighting system in a full-scale private office.” Energy Build., 29(1), 47–63.
Lee, E. S., and Selkowitz, S. E. (1995). “The design and evaluation of integrated envelope and lighting control strategies for commercial buildings.” ASHRAE Trans., 101(1), 326–342.
Littlefair, P. J. (2001). “Photoelectric control: The effectiveness of techniques to reduce switching frequency.” Light. Res. Technol., 33(1), 43–55.
O’Neill, B., Tzempelikos, A., and Athienitis, A. K. (2007). “Daylight and luminar control in a perimeter zone using an automated venetian blind.” Proc., 2nd SBRN and 32nd SESCI Conf., Solar Buildings Research Network, Calgary, Canada.
Reinhart, C. F., Mardaljevic, J., and Rogers, Z. (2006). “Dynamic daylight performance metrics for sustainable building design.” Leukos, 3(1), 1–25.
Reinhart, C. F., and Voss, K. (2003). “Monitoring manual control of electric lighting and blinds.” Light. Res. Technol., 35(3), 243–260.
Tzempelikos, A., and Athienitis, A. K. (2007). “The impact of shading design and control on building cooling and lighting demand.” Sol. Energy, 81(3), 369–382.
Tzempelikos, A., Athienitis, A. K., and Karava, P. (2007). “Simulation of façade and envelope design options for a new institutional building.” Sol. Energy, 81(9), 1088–1103.
Tzempelikos, A., Athienitis, A. K., and Nazos, A. (2010a). “Integrated design of perimeter zones with glass facades.” ASHRAE Trans., 116(1), 461–477.
Tzempelikos, A., Bessoudo, M., Athienitis, A. K., and Zmeureanu, R. (2010b). “Indoor thermal environmental conditions near glazed facades with shading devices—Part II: Thermal comfort simulation and impact of glazing and shading properties.” Build. Environ., 45(11), 2517–2525.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Jul 8, 2010
Accepted: Aug 29, 2011
Published online: Aug 15, 2012
Published in print: Sep 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.