House-Building Business Models and Off-Site Construction Take-Up
Publication: Journal of Architectural Engineering
Volume 18, Issue 2
Abstract
The potential benefits of off-site construction have been widely reported. However, its take-up in U.K. construction has been less than hoped. Previous studies have contributed solutions to accelerating take-up of off-site technology, albeit few examined the issue in business contexts. This paper presentes a novel approach to addressing off-site construction take-up in relation to business models. It reviews the challenges facing U.K. house-building business, maps conventional and emergent business models, and identifies factors capturing and creating value, centering on process and activities, risks, and finance. In the United Kingdom, house building is often decoupled from contracting, instead focusing on land acquisition, in response to the dominance of land-use planning. The competitive edge potentially available from technological innovation is often rendered less important or prevalent. However, exemplars do exist regarding incorporating off-site construction into house-building business strategy and adapting or creating business models to optimize such an approach. This paper presents a conceptual model to help illustrate the multifaceted relationship between business models and off-site construction, which is examined drawing on a number of case studies of large U.K. house builders, the findings of which should help position future enquiries.
Get full access to this article
View all available purchase options and get full access to this article.
References
Amit, R., and Zott, C. (2001). “Value creation in e-business.” Strategic Manage. J.SMAJD8, 22(6–7), 493–520.
Ball, M. (1996). Housing and construction: A troubled relationship? The Policy Press, Bristol, U.K.
Ball, M. (2008). Firm size and competition: A comparison of the housebuilding industries in Australia, the United Kingdom and the USA, RICS, London.
Ball, M. (2010). The housebuilding industry: Promoting recovery in housing supply, CLG, London.
Barker 33 Cross-Industry Group. (2006). “Modern methods of construction: Executive summary of final report.” 〈http://www.hbf.co.uk/fileadmin/documents/barker/MMC_Final_Draft.pdf〉.
Barker, K. (2003). “Review of housing supply: Securing our future housing needs.” Barker Review Interim Rep.—Analysis, Her Majesty’s Stationery Office, London.
Barlow, J., Childerhouse, P., Gann, D., Hong-Minh, S., Naim, M., and Ozaki, R. (2003). “Choice and delivery in housebuilding: Lessons from Japan for UK housebuilders.” Build. Res. Inf.BREIEA, 31(2), 134–145.
Barlow, J., and Ozaki, R. (2005). “Building mass customized housing though innovation in the production system: Lessons from Japan.” Environ. Plann. A, 37(1), 9–20.
Blackman, D. (2007). “Barratt to close prefab business.” Build. Mag., 〈http://www.building.co.uk/news/barratt-to-close-prefab-business/3087959.article〉 (May 25, 2007).
Brady, T., Davies, A., and Gann, D. (2005). “Can integrated solutions business models work in construction?” Build. Res. Inf.BREIEA, 33(6), 571–579.
Building. (2010). “Osborne’s axe fells schools and housing.” 〈’http://www.building.co.uk/news/osborne’s-axe-fells-schools-and-housing/5007762.article〉 (Oct. 22, 2010).
Callcutt, J. (2007). The Callcutt review of housebuilding delivery, Dept. of Communities and Local Government (CLG), London.
Casadesus-Masanell, R., and Ricart, J. E. (2010). “From strategy to business models and to tactics.” Long Range Plann.LRPJA4, 43(2–3), 195–215.
Chiang, Y., Tang, B., and Wong, F. (2008). “Volume building as competitive strategy.” Constr. Manage. Econ., 26(2), 161–176.
Department for Business, Enterprise and Regulatory Reform (BERR). (2008). “Strategy for sustainable construction.” BERR, London.
Eastman, C. M., and Sacks, R. (2008). “Relative productivity in the AEC industries in the United States for on-site and off-site activities.” J. Constr. Eng. Manage.JCEMD4, 134(7), 517–526.
Egan, J. (1998). Rethinking construction: The report of the Construction Task Force, Dept. of the Environments, Transport and the Regions, London.
Ekholm, A., and Molnar, M. (2009). “ICT development strategies for industrialisation of the building sector.” J. Inf. Technol. Constr., 14, 429–444.
Gibb, A. G. F. (1999). Off-site fabrication: prefabrication, pre-assembly and modularisation, Whittles, Caithness, U.K.
Gibb, A. G. F., and Isack, F. (2003). “Re-engineering through pre-assembly: Client expectations and drivers.” Build. Res. Inf.BREIEA, 31(2), 146–160.
Goodier, C. I., and Gibb, A. G. F. (2007). “Future opportunities for offsite in the UK.” Constr. Manage. Econ., 25(6), 585–595.
Goodier, C. I., and Pan, W. (2010). The future of UK housebuilding, RICS, London.
Green, S. D., Harty, C., Elmualim, A. A., Larsen, G. D., and Kao, C. C. (2008). “On the discourse of construction competitiveness.” Build. Res. Inf.BREIEA, 36(5), 426–435.
Hofman, E., Voordijk, H., and Halman, J. (2009). “Matching supply networks to a modular product architecture in the house-building industry.” Build. Res. Inf.BREIEA, 37(1), 31–42.
Homes and Communities Agency (HCA). (2010). Design for Manufacture lessons learnt 2, HCA, London.
Housing Forum. (2002). Homing in on excellence: A commentary on the use of off-site fabrication methods for the UK housebuilding industry, The Housing Forum, London.
Johnson, M. W., Christensen, C. M., and Kagermann, H. (2008). “Reinventing your business model.” Harv. Bus. Rev.HABRAX, 86(12), 50–59.
Kagioglou, M., Cooper, R., and Aouad, G. (1998). A generic guide to the design and construction process protocol, Univ. of Salford, Salford, U.K.
Killian, J., and Pretty, D. (2008). “Planning applications: A faster and more responsive system.“ The Killian Pretty Review, Final Rep., Communities and Local Government (CLG), London.
Lam, P. T. I., Chan, A. P. C., Wong, F. K. W., and Wong, F. W. H. (2007). “Constructability rankings of construction systems based on the analytical hierarchy process.” J. Archit. Eng.JAEIED, 13(1), 36–43.
Li, H., Guo, H., Skibniewski, M. J., and Skitmore, M. (2008). “Using the IKEA model and virtual prototyping technology to improve construction process management.” Constr. Manage. Econ., 26(9), 991–1000.
Li, H., Li, V., Skitmore, M., Wong, J. K. W., and Cheng, E. W. L. (2009). “Competitiveness factors: A study of the real estate market in China.” Constr. Manage. Econ., 27(6), 567–579.
Magretta, J. (2002). “Why business models matter.” Harv. Bus. Rev.HABRAX, 80(5), 86–92.
Meikle, J. (2008). “UK housebuilding.” Build. Res. Inf.BREIEA, 36(2), 200–202.
Morris, M., Schindehutte, M., and Allen, J. (2005). “The entrepreneur’s business model: Toward a unified perspective.” J. Bus. Res.JBRED4, 58(6), 726–735.
Mullens, M. A., and Arif, M. (2006). “Structural insulated panels: Impact on the residential construction process.” J. Constr. Eng. Manage.JCEMD4, 132(7), 786–794.
National Audit Office (NAO). (2005). Using modern methods of construction to build homes more quickly and efficiently, NAO, London.
National Audit Office (NAO). (2008). Planning for homes: Speeding up planning applications for major housing developments in England, NAO, London.
NBS. (2010). Approved document L1A: Conservation of fuel and power, NBS, London.
National Federation of Builders. (2007). “NFB house builders association e-newsletter.” 〈http://www.builders.org.uk/resources/nfb/000/248/300/17.09.07.pdf〉 (Sept. 17, 2007).
Office of the Deputy Prime Minister (ODPM). (2003). Sustainable communities: Building for the future, ODPM, London.
Office of the Deputy Prime Minister (ODPM). (2005). Sustainable communities: Homes for all, ODPM, London.
Pan, W. (2006). “A decision support tool for optimising the use of offsite technologies in housebuilding.” Ph.D. thesis, Loughborough Univ., Loughborough, U.K.
Pan, W., Gibb, A. G. F., and Dainty, A. R. J. (2007). “Perspectives of housebuilders on the use of offsite modern methods of construction.” Constr. Manage. Econ., 25(2), 183–194.
Pan, W., Gibb, A. G. F., and Dainty, A. R. J. (2012). “Strategies for integrating the use of offsite production technologies in housebuilding.” J. Constr. Eng. Manage.JCEMD4, (Feb. 13, 2012).
Parry, T., Howlett, C., and Samuelsson-Brown, G. (2003). “Off site fabrication: UK attitudes and potential.” Rep. 17356/1, Building Services Research and Information Association (BSRIA), Bracknell, U.K.
Roy, R., Brown, J., and Gaze, C. (2003). “Re-engineering the construction process in the speculative house-building sector.” Constr. Manage. Econ., 21(2), 137–146.
Seaden, G., Guolla, M., Doutriaux, J., and Nash, J. (2003). “Strategic decisions and innovation in construction firms.” Constr. Manage. Econ., 21(6), 603–612.
Song, J., Fagerlund, W. R., Haas, C. T., Tatum, C. B., and Vanegas, J. A. (2005). “Considering prework on industrial projects.” J. Constr. Eng. Manage.JCEMD4, 131(6), 723–733.
Sparksman, G., Groak, S., Gibb, A. G. F., and Neale, R. (1999). Standardization and pre-assembly: Adding value to construction projects, Construction Industry Research and Information Association (CIRIA), London.
Stewart Milne Group. (2010). “About us.” 〈http://timbersystems.stewartmilne.com/Profile.aspx〉.
Tam, V. W. Y., Tam, C. M., Zeng, S. X., and Ng, W. C. Y. (2007). “Towards adoption of prefabrication in construction.” Build. Environ.BUSCBC, 42(10), 3642–3654.
Taylor, M. D. (2010). “A definition and valuation of the UK offsite construction sector.” Constr. Manage. Econ., 28(8), 885–896.
Teece, D. J. (2010). “Business models, business strategy and innovation.” Long Range Plann.LRPJA4, 43(2–3), 172–194.
The Stationery Office (TSO). (2010). Spending review 2010, TSO, Norwich, U.K.
Tykkä, S., et al. (2010). “Development of timber framed firms in the construction sector: Is EU policy one source of their innovation?.” For. Policy Econ., 12(3), 199–206.
Venables, T., Barlow, J., and Gann, D. (2004). Manufacturing excellence: UK capacity in offsite manufacturing, The Housing Forum, London.
Wilson, D. G., Smith, M. H., and Deal, J. (1999). Prefabrication and preassembly: Applying the techniques to building engineering services, Building Services Research and Information Association (BSRIA), Bracknell, U.K.
Yin, R. K. (2003). Case study research: Design and methods, 3rd Ed., Sage, Thousand Oaks, CA.
Information & Authors
Information
Published In
Journal of Architectural Engineering
Volume 18 • Issue 2 • June 2012
Pages: 84 - 93
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Dec 13, 2010
Accepted: Jul 20, 2011
Published online: Jul 22, 2011
Published in print: Jun 1, 2012
Published ahead of production: Jun 15, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.