Principal Deviatoric Strain Increment Ratios for Sand Having Inherent Transverse Isotropy
Publication: International Journal of Geomechanics
Volume 6, Issue 5
Abstract
The behavior of sand on the plane, including the relation between the principal deviatoric strain increment ratios, is not fully understood. The objectives are: To clarify experimentally the relation between the principal deviatoric strain increment ratios for sand in a wide range of values and to discuss the basic shear behavior, taking particular notice of inherent transverse isotropy and noncoaxiality. From the experimental results on sand with inherent transverse isotropy, it was observed that the relation between the principal deviatoric strain increment ratios is fundamental and is related to the shape of the failure surface and the extent of strain localization. A new equation for the principal deviatoric strain increment ratios is proposed to model the influence of the incremental stress.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was partly supported by the Kajima Foundation’s Research Grant, which is acknowledged with thanks. The experiments detailed here were performed in the Department of Civil Engineering of Tohoku University. The writers are grateful for the support of this Department. Finally, we thank Regents’ Professor C. S. Desai of the University of Arizona, Professor M. Zaman of the University of Oklahoma, and Dr. S. Somasundaram of Advanced Earth Sciences Inc. for their insightful comments on this paper.
References
Desai, C. S., and Siriwardane, H. J. (1984). Constitutive laws for engineering materials with emphasis on geologic materials, Prentice-Hall, Englewood Cliffs, N.J.
Gutierrez, M. (1989). “Behavior of sand during rotation of principal stress direction.” D. Eng. thesis, Univ. Tokyo, Tokyo.
Habib, P. (1953). “Influence of the variation of the average principal stress upon the shearing strength of soils.” Proc., 3rd Int. Conf. on Soil Mechanics and Foundations Engineering, Zurich, 131–136.
Lade, P. V. (1997). “Modelling the strengths of engineering materials in three dimensions.” Mech. Cohesive-Frict. Mater., 2, 339–356.
Lade, P. V., and Duncan, J. M. (1973). “Cubical triaxial tests on cohesionless soil.” J. Soil Mech. and Found. Div., 99(10), 793–812.
Lade, P. V., and Duncan, J. M. (1975). “Elastoplastic stress-strain theory for cohesionless soil.” J. Geotech. Engrg. Div., 101(10), 1037–1053.
Matsuoka, H., and Sun, D. (1995). “Extension of spatially mobilized plane (SMP) to frictional and cohesive materials and its application to cemented sands.” Soils Found., 35(4), 63–72.
Miura, K., Miura, S., and Toki, S. (1986). “Deformation behavior of anisotropic dense sand under principal stress axes rotation.” Soils Found., 26(1), 36–52.
Miyamori, T. (1976). “Shear strength and deformation characteristics of sand under multi-axial stress state.” Proc., Jpn. Soc. Civ. Engrg., 255, 81–91 (in Japanese).
Mroz, Z. (1967). “On the description of anisotropic workhardening.” J. Mech. Phys. Solids, 15, 163–175.
Nakata, Y., Yasufuku, N., Murata, H., Hyodo, M., and Nagashima, T. (1995). “Undrained and drained shear behavior of inherent anisotropic sand reference to fixed principal stress.” J. Geotech. Engrg. Div., Jpn. Soc. Civ. Engrg., 511(III-30), 209–220 (in Japanese).
Rowe, P. W. (1962). “The stress-dilatancy relation for static equilibrium of an assembly of particles in contact.” Proc. R. Soc. London, Ser. A, 269, 500–527.
Sato, K., Yasuhara, K., Higuchi, T., and Yoshida, N. (1996). “Effect of principal stress direction on undrained cyclic shear behavior of dense sand.” J. Geotech. Engrg. Div., Jpn. Soc. Civ. Engrg., 541(III-35), 199–213 (in Japanese).
Suzuki, K., Sugano, T., and Yanagisawa, E. (1993). “Drained shear behaviour of sand with inherent anisotropy.” J. Geotech. Engrg. Div., Jpn. Soc. Civ. Engrg., 481(III-25), 117–124 (in Japanese).
Suzuki, K., and Yamada, T. (2003). “Strain localization extent in sand under drained triaxial tests.” Proc., 3rd Int. Symp. on Deformation Characteristics of Geomaterials, Lyon, 737–742.
Suzuki, K., and Yanagisawa, E. (1998). “Formulation of a constitutive model of sand with inherent transverse isotropy.” J. Struct. Engrg., Jpn. Soc. Civ. Engrg., 44A, 391–398 (in Japanese).
Tatsuoka, F., Sakamoto, M., Kawamura, T., and Fukushima, S. (1986). “Strength and deformation characteristics of sand in plane strain compression at extremely low pressures.” Soils Found., 26(1), 65–84.
Toki, S., and Miura, S. (1979). “A preparation method for laboratory sand specimens.” Proc., 24th Symp. Soil Engineering, Tokyo, 173–180 (in Japanese).
Yong, R. N., and McKyes, E. (1971). “Yield and failure of a clay under triaxial stresses.” J. Soil Mech. and Found. Div., 94(1), 159–176.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Sep 2, 2004
Accepted: Jun 6, 2005
Published online: Sep 1, 2006
Published in print: Sep 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.