Undrained Bearing Capacity of Square and Rectangular Footings
Publication: International Journal of Geomechanics
Volume 6, Issue 3
Abstract
The uniaxial vertical bearing capacity of square and rectangular footings resting on homogeneous undrained clay is investigated with finite element analyses, using both Tresca and von Mises soil models. Results are compared with predictions from conventional bearing capacity theory and available analytical and numerical solutions. By calibrating the finite element results against known exact solutions, best estimates of bearing capacity for rough-based rectangular footings are derived, with the shape factor fitted by a simple quadratic function of the footing aspect ratio. For a square footing, the bearing capacity is approximately 5% lower than that based on Skempton’s shape factor of 1.2.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work described here forms part of the activities of the Special Research Centre for Offshore Foundation Systems, established and supported under the Australian Research Council’s Research Centres Program. This support is gratefully acknowledged.
References
Cox, A. D., Eason, G., and Hopkins, H. G. (1961). “Axially symmetric plastic deformation in soils.” Proc. R. Soc. London, Ser. A, 254, 1–45.
De Beer, E. E. (1970). “Experimental determination of the shape factor and the bearing capacity factors for sand.” Geotechnique, 20(4), 387–411.
Gourvenec, S. M., and Randolph, M. R. (2003). “Effect of strength non-homogeneity on the shape and failure envelopes for combined loading of strip and circular foundations on clay.” Geotechnique, 53(6), 575–586.
Hansen, B. J. (1970). “A revised and extended formula for bearing capacity.” Bulletin 28, Danish Geotechnical Institute Copenhagen, Denmark.
Hibbit, Karlsson and Sorensen, Inc. (HKS). (2002). ABAQUS users’ manual, version 6.1.
Itasca Consulting Group (1997). FLAC3D users’ manual, Minneapolis.
Kusakabe, O., Susuki, H., and Nakase, A. (1986). “An upper bound calculation on bearing capacity of a circular footing on a nonhomogeneous clay.” Soils Found., 26(3), 143–148.
Levin, E. (1955). “Indentation pressure of a smooth circular punch.” Q. Appl. Math., 13(2), 133–137.
Michalowski, R. L. (2001). “Upper bound load estimates on square and rectangular footings.” Geotechnique, 51(9), 787–798.
Micahlowski, R. L., and Dawson, E. M. (2002). “Three-dimensional analysis of limit loads on Mohr–Coulomb soil.” Foundations of civil and environmental engineering, Vol. 1, Poznan University of Technology Press, Poland, 37–147.
Prandtl, L. (1921). “Eindringungsfestigkeit und festigkeit von schneiden.” Angew. Math. U. Mech, 1:15–20.
Randolph, M. F. (2000). “Effect of strength anisotropy on capacity of foundations.” Proc., Booker Memorial Symp., Sydney, Australia, 313–328.
Salgado, R., Lyamin, A. V., Sloan, S. W., and Yu, H. S. (2004). “Two- and three-dimensional bearing capacity of foundations in clay.” Geotechnique, 54(5), 297–306.
Shield, R. T., and Drucker, D. C. (1953). “The application of limit analysis to punch indentation problems.” J. Appl. Mech., 20, 453–460.
Skempton, A. W. (1951). “The bearing capacity of clays.” Proc., Building and Research Congress, Vol. 1, London, 180–189.
Taiebat, H. A. (2005). “Effects of flow rules on the prediction of Tresca model.” submitted to Geotechnique.
Taiebat, H. A., and Carter, J. P. (2000). “Numerical studies of the bearing capacity of shallow foundations on cohesive soil subjected to combined loading.” Geotechnique, 50(4), 409–418.
Terzaghi, K. (1943). Theoretical soil mechanics, Wiley, New York.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Jan 31, 2005
Accepted: Apr 28, 2005
Published online: May 1, 2006
Published in print: May 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.