Testing of Hygrothermally Aged E-Glass/Epoxy Cylindrical Laminates Using a Novel Fixture for Simulating Internal Pressure
Publication: Journal of Composites for Construction
Volume 13, Issue 4
Abstract
This paper discusses the development of a novel test fixture for applying a uniform radial stress to cylindrical composite laminates in such a way as to eliminate bending moments and axial loads. This fixture requires the use of easily fabricated poly-tetrafluoroethylene (PTFE) ring seals. These seals, which fit just inside the composite sample, are designed to be internally pressurized in the fixture and expand outwards, applying a uniform radial load to the sample. The results of mechanics analyses of the PTFE ring seal and composite sample are presented, which estimate the radial stress applied to the composite sample as a fraction of the applied internal hydraulic pressure. Further, results are presented from a prolonged hygrothermal aging study, in which the E-glass/epoxy, cylindrically wound composite samples are aged under varying hygrothermal conditions (ambient dry; and 30, 40, and submerged in water). At various points during the aging, a subset of samples are removed and destructively tested to measure the reduction in strength from the initial values. Annular specimens are tested using the fixture, and hoop tensile strengths are recorded. In addition, samples cut axially from the cylindrical composite tubes are used to evaluate tensile and compressive axial strengths. Arrhenius fits are used to estimate activation energies for the strength loss in the axial (compression) and hoop (tension) directions.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bank, L. C., Gentry, R. G., Thompson, B. P., and Russell, J. S. (2001). “A model specification for frp composites for civil engineering structures.” Proc., Int. Conf. for FRP Composites in Civil Engineering, Hong Kong, Elsevier, New York.
Bank, L. C., Gentry, R. G., Thompson, B. P., and Russell, J. S. (2003). “A model specification for FRP composites for civil engineering structures.” Constr. Build. Mater., 17(6–7), 405–437.
Cain, J. J. (2008). “Long term durability of glass reinforced composites.” Ph.D. dissertation, Virginia Polytechnic Institute and State Univ., Blacksburg, Va.
Cain, J. J., et al. (2006). “Post-curing effects on marine VARTM FRP composite material properties for test and implementation.” J. Eng. Mater. Technol., 128(1), 34–40.
Chin, J. W., Hughes, W. L., and Signor, A. (2001). “Elevated temperature aging of glass fiber reinforced vinyl ester and isopthalic polyester composites in water, salt water and concrete pore solution.” Proc., 16th Technical Conf., The American Society for Composites, Blacksburg, Va.
Chu, W., and Karbhari, V. M. (2005). “Effect of water sorption on performance of pultruded E-glass/vinylester composites.” J. Mater. Civ. Eng., 17(1), 63–71.
Cohen, D., Toombes, Y. T., Johnson, A. K., and Hansen, M. F. (1995). “Pressurized ring test for composite pressure vessel hoop strength and stiffness evaluation.” J. Compos. Technol. Res., 17(4), 331–340.
Fam, A. (2000). “Concrete-filled fibre-reinforced polymer tubes for axial and flexural structural members.” Ph.D. dissertation, Univ. of Manitoba, Manitoba, Canada.
Fam, A., and Rizkalla, S. (2001). “Behavior of axially loaded concrete-filled circular fiber-reinforced polymer tubes.” ACI Struct. J., 98(3), 280–289.
Fam, A. Z., and Rizkalla, S. H. (2002). “Flexural behavior of concrete-filled fiber-reinforced polymer circular tubes.” J. Compos. Constr., 6(2), 123–132.
Helbling, C. S., and Karbhari, V. M. (2003). “Hygrothermal degradation of E-glass/vinyl ester composites under sustained load.” Proc., Intl. SAMPE Symp. and Exhibition, Long Beach, Calif., 1553–1565.
Hyer, M. W. (1998). Stress analysis of fiber-reinforced composite materials, WCB/McGraw-Hill, New York.
Iskander, M. G., and Hassan, M. (1998). “State of the practice review in FRP composite piling.” J. Compos. Constr., 2(3), 116–120.
Karbhari, V. M., and Zhang, S. (2003). “E-glass/vinylester composites in aqueous environments—I: Experimental results.” Appl. Compos. Mater., 10(1), 19–48.
Knight, C. E., Jr. (1977). “Failure analysis of the split-D test method.” ASTM Spec. Tech. Publ., 617, 201–214.
Liao, K., Schultheisz, C. R., and Hunston, D. L. (1999). “Long-term environmental fatigue of pultruded glass-fiber-reinforced composites under flexural loading.” Int. J. Fatigue, 21(5), 485–495.
Mirmiran, A. (2001). “Innovative combinations of FRP and traditional materials.” Proc., Int. Conf. on FRP Composites in Civil Engineering, Hong Kong.
Mirmiran, A., and Shahawy, M. (1997). “Behavior of concrete columns confined by fiber composites.” J. Struct. Eng., 123(5), 583–590.
Mirmiran, A., Shahawy, M., and Samaan, M. (1999). “Strength and ductility of hybrid FRP-concrete beam-columns.” J. Struct. Eng., 125(10), 1085–1093.
Pando, M. A., Filz, G. M., Lesko, J. J., and Ealy, C. E. (2006). “A laboratory and field study of composite piles for bridge substructures.” Federal Highway Administration Research Rep. No. FHWA-HRT-04-043, FHwA, Washington, D.C.
Purnell, P., Lesko, J. J., and Cain, J. (2005). “Accelerated ageing rationales for GRC and their application to GRP.” Proc., Durability of Composite Systems (DURACOSYS) Conf., Virginia Tech, Blacksburg, Va.
Purnell, P., Short, N. R., and Page, C. L. (2001). “A static fatigue model for the durability of glass fibre reinforced cement.” J. Mater. Sci., 36, 5385–5390.
Saada, A. S. (1974). Elasticity: Theory and applications, Krieger, Malabar, Fla.
Thompson, R. C., Pak, T. T., and Rech, B. M. (2003). “Hydroburst test methodology for evaluation of composite structure.” Composite Materials: Testing and Design, ASTM STP 1436, ASTM, Pittsburgh.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Dec 11, 2007
Accepted: Feb 9, 2009
Published online: Jul 15, 2009
Published in print: Aug 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.