Strengthening of Openings in One-Way Reinforced-Concrete Slabs Using Carbon Fiber-Reinforced Polymer Systems
Publication: Journal of Composites for Construction
Volume 8, Issue 5
Abstract
Six prototype one-way RC slabs with openings were strengthened with externally bonded carbon fiber-reinforced polymer (CFRP) systems and subjected to concentrated line loads. The results were compared to those of a solid slab without opening and a slab with an unstrengthened opening. The CFRP system proved to be effective in enhancing the load-carrying capacity and stiffness of RC slabs with an opening, provided that premature failure due to CFRP debonding is excluded. An analytical model based on the modified yield line method is presented, in which four failure modes comprising one orthogonal and three nonorthogonal yield line patterns were considered. The analytical model predicts the load carrying capacity of the strengthened slabs very well. The opening width has a more prominent effect on the load-carrying capacity than does the opening length.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Concrete Institute (ACI. ( 1996). “State-of-the-art report on fiber reinforced plastic (FRP) reinforcement for concrete structures.” Rep. 440R, Commitee 440, Detroit.
2.
American Concrete Institute (ACI. ( 2002a). “Building code requirements for structural concrete.” ACI 318-2002, Detroit.
3.
American Concrete Institute (ACI. ( 2002b). “Commentary.” ACI 318R-2002, Detroit.
4.
Armer, G.S. T. ( 1968). “Ultimate load tests of slabs designed by the strip method.” Proc., Institution of Civil Engineers, Vol. 41, London, 313–331.
5.
Bhatti, B.A., and Lin, B. ( 1996). “Effect of openings on deflections and strength of reinforced concrete slabs.” Recent developments in deflection evaluation of concrete, ACI-SP161, E. G. Nawy, ed., American Concrete Institute, Detroit, 149–164.
6.
Chen, J. F., and Teng, J. G. (2001). “Anchorage strength models for FRP and steel plates bonded to concrete.” J. Struct. Eng., 127(7), 784–791.
7.
Fluhr, W.E. ( 1960). “Theoretical analysis of effects of openings on the bending moments in square plates with fixed edges.” PhD thesis, Univ. of Illinois, Urbana, Ill.
8.
Hillerborg, A. ( 1996). Strip method design handbook, E & FN Spon, London.
9.
Islam, S., and Park, R. (1971). “Yield-line analysis of two-way reinforced concrete slabs with openings.” J. Inst. Struct. Eng., 49(6), 269–276.
10.
Lash, S. D., and Banejee, A. (1967). “Strength of simply supported square plates with central square openings.” Trans. Eng. Inst. Can., 10(A-5), 3–11.
11.
Prescott, W.S. ( 1961). “Analysis of square clamped plates containing openings with stiffened edges.” PhD thesis, Univ. of Illinois, Urbana, Ill.
12.
Zaslavsky, A. ( 1967). “Yield line analysis of rectangular slabs central openings.” Proc., ACI, Vol. 64, American Concrete Institute, Detroit, 838–844.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 ASCE.
History
Published online: Oct 1, 2004
Published in print: Oct 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.