Further Tests on Beam-to-Column Connections for Pultruded Frames: Web-Cleated
Publication: Journal of Composites for Construction
Volume 3, Issue 1
Abstract
Three full-sized physical tests have been conducted to understand the performance of existing beam-to-column connection details for simple frames of pultruded profiles. Experimental moment-rotation curves have been obtained under short-term loading and modes of failure established. The tests were on 254 mm (10 in.) proprietary web-cleated connections following recommended details given in the Strongwell design manual. Issues raised from the deliverables of previous tests on 203 mm (8 in.) simple connections are addressed. Results are also used to assess the generality of the design recommendations given in the EUROCOMP Design Code and Handbook. None of the ten recommendations are found to be seriously deficient, providing evidence to support the continued application of pultruded web-cleated connections in practice. It is advised, however, that, when using current recommendations to design frames, account must be taken of the long-term durability effects which can lead to a lower, and unknown, connection resistance.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bass, A. J. ( 1994). “Behaviour of polymeric composite connections for pultruded frames,” MS thesis, University of Warwick, Coventry, U.K.
2.
Clarke, J. L., ed. ( 1996). Structural design of polymeric composites—EUROCOMP design code and handbook . E & FN Spon, London.
3.
Creative pultrusion design guide . (1988). Creative Pultrusion Inc., Alum Bank, Pa.
4.
El-Badry, M. M., ed. ( 1996). Proc., 2nd Int. Conf. on Advanced Compos. Mat. in Bridges and Struct., Canadian Society for Civil Engineering, Montreal.
5.
EXTREN fiberglass structural shapes design manual . (1989). Strongwell, Bristol, Va.
6.
Fiberline design manual for structural profiles in composite materials . (1995). Fiberline Composites A/S, Kolding, Denmark.
7.
Mosallam, A. S. ( 1995). “Connection & reinforcement design details for pultruded reinforced plastics (PFRP) composite structures.” J. Reinforced Plastics and Compos., 14(7), 752–784.
8.
Mottram, J. T. ( 1994). “Connection tests for pultruded frames.” Civ. Engrg. Group, Res. Rep. CE47, Dept. of Engrg., University of Warwick, Coventry, UK.
9.
Mottram, J. T. ( 1996). “Nominally pinned connections for pultruded frames.” Structural design of polymer composites—EUROCOMP design code and handbook, J. L. Clarke, ed., E & FN Spon, London, 703–718.
10.
Mottram, J. T., and Turvey, G. J., eds. ( 1998). “State-of-the-art review on design, testing, analysis and application of polymeric composite connections.” Polymeric Compos. Struct. Working Group 7, COST C1 Project on Behaviour of Civ. Engrg. Struct. Connections, DG XII, European Commission, Office for Official Publications of the European Communities, Luxembourg.
11.
Mottram, J. T., and Zheng, Y. ( 1996). “State-of-the-art review on the design of beam-to-column connections for pultruded frames.” Composite Struct., 35(4), 387–401.
12.
Mottram, J. T., and Zheng, Y. (1999). “Further tests of beam-to-column connections for pultruded frames: flange-cleated.”J. Compos. for Constr., ASCE, in press.
13.
Turvey, G. J. ( 1997). “Analysis of pultruded GRP beams with semi-rigid end connections.” Compos. Struct., 38(1–4), 3–16.
14.
Turvey, G. J., and Cooper, C. ( 1996a). “Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics.” Proc., 7th European Conf. on Compos. Mat.: Realising their Commercial Potential, Vol. 2, Woodhead Publishing Limited, Cambridge, U.K., 295–300.
15.
Turvey, G. J., and Cooper, C. ( 1996b). “Characterisation of the short-term static moment-rotation response of bolted connections between pultruded GRP beam and column WF-sections.” Proc., 2nd Int. Conf. on Advanced Compos. Mat. in Bridges and Struct., Canadian Society for Civil Engineering, Montreal, 927–934.
Information & Authors
Information
Published In
History
Received: Mar 25, 1998
Published online: Feb 1, 1999
Published in print: Feb 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.