Reduction of Greenhouse Gas Emission through Applying Hydrogen-Rich Fuel on Industrial Boiler
Publication: Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management
Volume 12, Issue 4
Abstract
The combustion of fossil fuel is the major source of greenhouse gases; therefore, fuel switching is viewed as a practical method to reduce greenhouse gas emission. Hydrogen may serve as an alternative for fossil fuel and it is clean. In this study, worthless hydrogen-rich fuel gas (RG), the by-product of the production processes, was led to the fuel system of a industrial boiler in a full-scale petrochemistry plant to partially replace the fuel oil (FO). The result shows that, by changing the inlet RG:FO volumetric flow rate ratio from 1:5 to 1:1.5, the emission of greenhouse gas is reduced significantly. Four sets of boiler loading, including 80, 70, 60, and 50%, were applied to the boiler at the full-scale plant, and the reduction of emission by , , , and can be achieved, which is down by 22.9, 39.8, 43.7, and 47.2%. Meanwhile, the amount of emission can be reduced by 66, 79, 25, and . Therefore, the use of RG to partly replace FO has practical benefits on the reduction of greenhouse gas emission, and better operating conditions for the boiler is suggested at an inlet RG:FO ratio of 1:1.5.
Get full access to this article
View all available purchase options and get full access to this article.
References
Beer, J. M. (2000). “Combustion technology developments in power generation in response to environmental challenges.” Prog. Energy Combust. Sci., 26, 301–327.
Bojic, M., and Mourdoukoutas, P. (2000). “Energy saving does not yield CO emission reductions: The case of waste fuel use in a steel mill.” Appl. Therm. Eng., 20, 963–975.
Choudhuri, A. R., and Gollahalli, S. R. (2000). “Combustion characteristics of hydrogen-hydrocarbon hybrid fuels.” Int. J. Hydrogen Energy, 25, 451–462.
Choudhuri, A. R., and Gollahalli, S. R. (2003). “Characteristics of hydrogen-hydrocarbon composite fuel turbulent jet flames.” Int. J. Hydrogen Energy, 28, 445–454.
Gentizis, T. (2000). “Subsurface sequestration of carbon dioxide-an overview from an Alberta (Canada) perspective.” Int. J. Coal Geol., 43, 287–305.
Guo, H., Smallwood, G. J., Liu, F., Ju, Y., and Gülder, Ö. L. (2005). “The effect of hydrogen addition on flammability limit and emission in ultra-lean counterflow /air premixed flames.” Proc. Combust. Inst., 30, 303–311.
Hainsworth, D., Pourkashanian, M., Richardson, P., Rupp, J. L., and Williams, A. (1995). “The influence of carbon dioxide on smoke formation and stability in methane-oxgyen-carbon dioxide flames.” Fuel, 75, 393–396.
Hill, S. C., and Smoot, L. D. (2000). “Modeling of nitrogen oxides formation and destruction in combustion systems.” Prog. Energy Combust. Sci., 26, 417–458.
Hsieh, S. C., and Jou, C. J. G. (2007). “Reduction of greenhouse gas emission on a medium-pressure boiler through hydrogen-rich fuel control.” Appl. Therm. Eng., 27, 2924–2928.
İlbas, M. (2005). “The effect of thermal radiation and radiation models on hydrogen-hydrocarbon combustion modeling.” Int. J. Hydrogen Energy, 30, 1113–1126.
İlbas, M., Yılmaz, İ., and Kaplan, Y. (2005). “Investigations of hydrogen and hydrogen-hydrocarbon composite fuel combustion and emission characteristics in a model combustor.” Int. J. Hydrogen Energy, 30, 1139–1147.
Jaber, J. O. (2002). “Future energy consumption and greenhouse gas emission in Jordanian industries.” Appl. Energy, 71, 15–30.
Jenkin, M. E., and Clemitshaw, K. C. (2000). “Ozone and other secondary photochemical pollutants: Chemical processes governing their formation in the planetary boundary layer.” Atmos. Environ., 34, 2499–2527.
Kimura, N., Omata, K., Kiga, T., Takano, S., and Shikisima, S. (1995). “The characteristics of pulverized coal combustion in mixtures for CO recovery.” Energy Convers. Manage., 36, 805–808.
Konnov, A. A., Colson, G., and Ruyck, J. D. (2001). “NO formation rates for hydrogen combustion in stirred reactors.” Fuel, 80, 49–65.
Naha, S., and Aggarwal, S. K. (2004). “Fuel effect on emission in partially premixed flames.” Combust. Flame, 139, 90–105.
Reed, R. J. (1983). North American combustion handbook, North American Mfg. Co., 45–67.
Saario, A., Rebola, A., Coelho, P. J., Costa, M., and Oksanen, A. (2005). “Heavy fuel oil combustion in a cylindrical laboratory furnace: Measurements and modeling.” Fuel, 84, 359–369.
Shudo, T., and Mizuide, T. (2002). “ emission characteristics in rich-lean combustion of hydrogen.” JSAE Rev., 23, 9–14.
Stewart, C., and Hessami, M. A. (2005). “A study of methods of carbon dioxide capture and sequestration—The sustainability of a photosynthetic bioreactor approach.” Energy Convers. Manage., 46, 403–420.
Tseng, C. J. (2002). “Effect of hydrogen addition on methane combustion in a porous medium burner.” Int. J. Hydrogen Energy, 27, 699–707.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jan 15, 2008
Accepted: Jan 15, 2008
Published online: Oct 1, 2008
Published in print: Oct 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.