Oedometer Behavior of an Artificial Cemented Highly Collapsible Soil
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 135, Issue 6
Abstract
This study aims at investigating the mechanical behavior and the changes in fabric at various stages of loading and wetting of an artificial cemented highly collapsible geomaterial. The required metastable structure of a collapsible soil was produced by adding particles of expanded polystyrene to a soil-cement mixture. This technique is shown to reproduce main features inherently attributed to collapsible soils under idealized conditions where the effects of void ratio and degree of cementation can be properly isolated and accounted for. Collapse potential was evaluated on samples with and without cementation. From the observed behavior it was possible to identify the initial void ratio, cementation level, initial suction, and stress path as factors controlling the collapse potential of soils.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to acknowledge financial support provided by the Brazilian Government Agencies CAPES and CNPq. They also wish to recognize the contributions made by Professor Simon J. Wheeler.
References
Alonso, E. E., Gens, A., and Hight, D. W. (1987). “Special problem soils.” Proc., 9th European Conf. on Soils Mechanics and Foundation Engineering, Balkema, Dublin, Section 5, 1–68.
Alonso, E. E., Gens, A., and Josa, A. (1990). “A constitutive model for partially saturated soils.” Geotechnique, 40(3), 405–430.
ASTM. (2003). “Test method for measurement of collapse potential of soils.” Annual book of ASTM standards, D 5333, Philadelphia.
ASTM. (2006). “Standard practice for classification of soils for engineering purposes (Unified Soil Classification System).” Book of ASTM standards, D 2487, Philadelphia.
Futai, M. M., Almeida, M. S. S., Filho, F. C. S., and Conciani, W. (1999). “Experimental and theoretical evaluation of the maximum collapse.” Proc., 11th Panamerican Conf. on Soil Mechanics and Geotechnical Engineering, Brazilian Association of Soil Mechanics (ABMS), Foz do Iguaçu, Brazil, Vol. 1, 267–274.
Garga, V. K., and Blight, G. E. (1997). Permeability, mechanics of residual soils, Chap. 6, Balkema, Rotterdam, The Netherlands, 79–94.
Houston, S. L., Houston, W. N., Zapata, C. E., and Lawrence, C. (2001). “Geotechnical engineering practice for collapsible soils.” Geotech. Geologic. Eng., 19, 355–355.
Houston, S. W. (1996). “Foundations and pavements on unsaturated soils—Part one: collapsible soils.” Proc., 1st Int. Conf. on Unsaturated Soils, Paris, Vol. 3, 1421–1439.
Jennings, J. E., and Knight, K. (1957). “The additional settlement of foundations due to a collapse of structure of sandy subsoils on wetting.” Proc., Int. Conf. on Soil Mechanics and Foundation Engineering, Vol. 3, Butterworths, London, 316–319.
Jennings, J. E., and Knight, K. (1975). “A guide to construction on or with materials exhibiting additional settlement due to collapse of grain structure.” Proc., Regional Conf. for Africa on Soil Mechanics & Foundation Engineering, Vol. 1, Balkema, Rotterdam, The Netherlands, 99–105.
Jotisankasa, A., Ridley, A., and Coop, M. (2007). “Collapse behavior of compacted silty clay in suction monitored oedometer apparatus.” J. Geotech. Geoenviron. Eng., 133(7), 867–886.
Lim, Y. Y., and Miller, G. A. (2004). “Wetting-induced compression of compacted Oklahoma soils.” J. Geotech. Geoenviron. Eng., 130(10), 1014–1023.
Medero, G. M. (2005). “Behaviour of a collapsible artificially cemented soil.” Ph.D. thesis, Federal Univ. of Rio Grande do Sul, Porto Alegre, Brazil, 303 (in Portuguese).
Medero, G. M., Schnaid, F., Gehling, W. Y. Y., and Gallipoli, D. (2003). “Analysis of the mechanical response of an artificial collapsible soil.” Proc., From Experimental Evidence towards Numerical Modelling of Unsaturated Soils, Springer, Berlin, 135–145.
Medero, G. M., Schnaid, F., Gehling, W. Y. Y., and Wheeler, S. J. (2005). “Techniques of sample preparation of artificial cemented highly collapsible soil.” Proc., Advanced Experimental Unsaturated Soil Mechanics, Vol. 1, Balkema, Rotterdam, The Netherlands, 431–436.
Pereira, J. H. F., and Fredlund, D. G. (2000). “Volume change behaviour of collapsible compacted gneiss soil.” J. Geotech. Geoenviron. Eng., 126(10), 907–916.
Prietto, P. D. M. (2004). “Resistance and dilatacy of cemented soils: Theory and experiments.” Ph.D. Thesis, Federal Univ. of Rio Grande do Sul, Porto Alegre, Brazil, 229 (in Portuguese).
Rotta, G. V., Consoli, N. C., Prietto, P. D. M., and Graham, J. (2003). “Isotropic yielding in an artificially cemented soil cured under stress.” Geotechnique, 53(5), 493–501.
Schnaid, F. (2005). “Geocharacterisation and properties of natural soils by in situ tests.” Proc., 16th Int. Conf. on Soil Mechanics and Geotechnical Engineering (16ICSMGE), Vol. 1, Millpress, Osaka, Japan, 3–45.
Sun, D. A., Matsuoka, H., and Xu, Y. F. (2004). “Collapse behaviour of compacted clays in suction-controlled triaxial tests.” Geotech. Test. J., 27, 362–370.
Vu, H. Q., and Fredlund, D. G. (2003). “Implementation of soil property functions in volume change analyses in unsaturated soils.” Proc., 12th Asian Regional Conf. on Soil Mechanics and Geotechnical Engineering, Balkema, Singapore, 27–30.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Jan 4, 2006
Accepted: Oct 30, 2008
Published online: May 15, 2009
Published in print: Jun 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.