Optimization of Pile Groups Using Hybrid Genetic Algorithms
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 135, Issue 4
Abstract
This paper presents an automated optimal design method using a hybrid genetic algorithm for pile group foundation design. The design process is a sizing and topology optimization for pile foundations. The objective is to minimize the material volume of the foundation taking the configuration, number, and cross-sectional dimensions of the piles as well as the thickness of the pile cap as design variables. A local search operator by the fully stressed design (FSD) approach is incorporated into a genetic algorithm (GA) to tackle two major shortcomings of a GA, namely, large computation effort in searching the optimum design and poor local search capability. The effectiveness and capability of the proposed algorithm are first illustrated by a five by five pile group subjected to different loading conditions. The proposed optimization algorithm is then applied to a large-scale foundation project to demonstrate the practicality of the algorithm. The proposed hybrid genetic algorithm successfully minimizes the volume of material consumption and the result matches the engineering expectation. The FSD operator has great improvement on both design quality and convergence rate. Challenges encountered in the application of optimization techniques to design of pile groups consisting of hundreds of piles are discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was partially supported by the Research Grants Council of the Hong Kong Special Administrative Region, China (Project Nos. UNSPECIFIEDHKUST6126/03E and UNSPECIFIEDHKUST6302/04E). The advice and assistance provided through the practical example by Ping Liu of Ove Arup and Partners Hong Kong Ltd. are also gratefully acknowledged.
References
Bridge Software Institute (BSI). (2003). FB-Pier v3 program, Bridge Software Institute, Univ. of Florida, Gainesville, Fla.
Buildings Department. (2004). Code of practice for foundations, Buildings Dept., Hong Kong SAR.
Chan, C. M. (2001). “Optimal lateral stiffness design of tall buildings of mixed steel and concrete construction.” Struct. Des. Tall Build., 10(3), 155–177.
Chan, C. M. (2004). “Advances in structural optimization of tall buildings in Hong Kong.” Proc., Third China-Japan-Korea Joint Symp. on Optimization of Structural and Mechanical Systems, 49–57.
Coello, C. A. C. (2002). “Theoretical and numerical constraint-handling techniques used with evolutionary algorithms—A survey of the state of the art.” Comput. Methods Appl. Mech. Eng., 191, 1245–1287.
Geotechnical Engineering Office. (2006). “Foundation design and construction.” GEO Publication No. 1/2006, Geotechnical Engineering Office, Hong Kong.
Goldberg, D. E. (1989). Genetic algorithms in search, optimization, and machine learning, Addison-Wesley, New York.
Haftka, R. T., and Gurdal, Z. (1992). Elements of structural optimization, Kluwer, Dordrecht, The Netherlands.
Huang, Z., and Hinduja, S. (1986). “Shape optimization of a foundation for a large machine tool.” Int. J. Mach. Tool Des. Res., 26(2), 85–97.
Hurd, A. J., and Truman, K. Z. (2006). “Optimization method of pile foundations.” Proc., Int. Conf. on Advances in Engineering Structures, Mechanics, and Construction, 653–661.
Kim, H. T., Koo, H. K., and Kang, I. K. (2002). “Genetic algorithm-based optimum design of piled raft foundations with model tests.” J. Southeast Asian Geotech. Soc., 33(1), 1–11.
McVay, M., Zhang, L. M., Molnit, T., and Lai, P. (1998). “Centrifuge testing of large laterally loaded pile groups in sands.” J. Geotech. Geoenviron. Eng., 124(10), 1016–1026.
Ministry of Construction (MOC). (2002). Code for design of building foundation, Ministry of Construction (MOC), Beijing.
O’Neill, M. W., and Gazioglu, S. M. (1984). “An evaluation of relationships in clays.” Rep. to the American Petroleum Institute, PRAC82-41-2, Univ. of Houston, Houston, Tex.
O’Neill, M. W., and Reese, L. C. (1999). Drilled shafts: Construction procedures and design methods, U.S. Dept. of Transportation, Federal Highway Administration, Office of Implementation, McLean, Va.
Poulos, H. G., Carter, J. P., and Small, J. C. (2001). “Foundations and retaining structures—Research and practice.” Proc., 15th Int. Conf. on Soil Mechanics and Foundation Engineering, 2527–2606.
Reese, L. C., Cox, W. R., and Koop, F. B. (1974). “Analysis of laterally loaded piles in sand.” Proc., Offshore Technology Conf., Paper No. OTC 2080.
Truman, K. Z., and Hoback, A. S. (1992). “Optimization of steel piles under rigid slab foundations using optimality criteria.” Struct. Optim., 5, 30–36.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Jun 5, 2007
Accepted: Jun 18, 2008
Published online: Apr 1, 2009
Published in print: Apr 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.