Normal Fault Rupture Interaction with Strip Foundations
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 135, Issue 3
Abstract
Observations after earthquakes where surface fault ruptures crossed engineering facilities reveal that some structures survived the rupture almost unscathed. In some cases, the rupture path appears to divert, “avoiding” the structure. Such observations point to an interaction between the propagating rupture, the soil, and the foundation. This paper (i) develops a two-step nonlinear finite-element methodology to study rupture propagation and its interaction with strip foundations; (ii) provides validation through successful Class “A” predictions of centrifuge model tests; and (iii) conducts a parameter study on the interaction of strip foundations with normal fault ruptures. It is shown that a heavily loaded foundation can substantially divert the rupture path, which may avoid outcropping underneath the foundation. The latter undergoes rigid body rotation, often detaching from the soil. Its distress arises mainly from the ensuing loss of support that takes place either at the edges or around its center. The average pressure on the foundation largely dictates the width of such unsupported spans. Increasing decreases the unsupported width, reducing foundation distress. The role of is dual: (1) it compresses the soil, “flattening” fault-induced surface “anomalies”; and (2) it changes the stress field underneath the foundation, facilitating rupture diversion. However, even if the rupture is diverted, the foundation may undergo significant stressing, depending on its position relative to the fault outcrop.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work formed part of the EU research project “QUAKER,” which is funded through the EU Fifth Framework Programme: Environment, Energy, and Sustainable Development, Research and Technological Development Activity of Generic Nature: the Fight against Natural and Technological Hazards, under Contract No. EUEVG1-CT-2002-00064. Partial support by OSE (the Greek Railway Organization) is also acknowledged.
References
ABAQUS. (2004). ABAQUS V.6.4 user’s manual, Providence, R.I.
Ambraseys, N., and Jackson, J. (1984). “Seismic movements.” Ground movements and their effects on structures, P. B. Attewell and R. K. Taylor, eds., Surrey Univ. Press, Surrey, U.K., 353–380.
Anastasopoulos, I. (2005). “Fault rupture-soil-foundation-structure interaction.” Ph.D. thesis, School of Civil Engineering, National Technical Univ., Athens, Greece.
Anastasopoulos, I., Gazetas, G., Bransby, M. F., Davies, M. C. R., and El Nahas, A. (2007). “Fault rupture propagation through sand: Finite element analysis and validation through centrifuge experiments.” J. Geotech. Geoenviron. Eng., 133(8), 943–958.
Berill, J. B. (1983). “Two-dimensional analysis of the effect of fault rupture on buildings with shallow foundations.” Int. J. Soil Dyn. Earthquake Eng., 2(3), 156–160.
Bray, J. D. (1990). “The effects of tectonic movements on stresses and deformations in earth embankments.” Ph.D. thesis, Univ. of California, Berkeley.
Bray, J. D. (2001). “Developing mitigation measures for the hazards associated with earthquake surface fault rupture.” Proc., Workshop on Seismic Fault-Induced Failures—Possible Remedies for Damage to Urban Facilities, 55–79.
Bray, J. D., Seed, R. B., Cluff, L. S., and Seed, H. B. (1994a). “Earthquake fault rupture propagation through soil.” J. Geotech. Engrg., 120(3), 543–561.
Bray, J. D., Seed, R. B., and Seed, H. B. (1994b). “Analysis of earthquake fault rupture propagation through cohesive soil.” J. Geotech. Engrg., 120(3), 562–580.
Brune, J. N., and Allen, C. R. (1967). “A low-stress-drop, low magnitude earthquake with surface faulting. The imperial, California earthquake of March 4, 1966.” Bull. Seismol. Soc. Am., 57, 501–514.
Cole, D. A., Jr., and Lade, P. V. (1984). “Influence zones in alluvium over dip-slip faults.” J. Geotech. Engrg., 110(5), 599–615.
El Nahas, A., Bransby, M. F., and Davies, M. C. R. (2006). “Centrifuge modelling of the interaction between normal fault rupture and rigid, strong raft foundations.” Proc., Int. Conf. on Physical Modelling in Geotechnics, 337–342.
Eurocode EC8. (1994). “Structures in seismic regions. Part 5: Foundations, retaining structures, and geotechnical aspects.” Commission of the European Communities, Brussels.
Gaudin, C. (2002). “Experimental and theoretical study of the behavior of supporting walls: Validation of design methods.” Ph.D. thesis, Laboratoire Central des Ponts et Chaussées, Nantes, France.
Horsfield, W. T. (1977). “An experimental approach to basement-controlled faulting.” Geol. Mijnbouw, 56(4), 363–370.
Johansson, J., and Konagai, K. (2004). “Fault induced permanent ground deformations—Simulations and experimental verification.” Proc., 13th World Conf. on Earthquake Engineering (DVD-ROM), Int. Assoc. of Earthquake Engineering.
Kelson, K. I., Kang, K.-H., Page, W. D., Lee, C.-T., and Cluff, L. S. (2001). “Representative styles of deformation along the Chelungpu Fault from the 1999 Chi-Chi (Taiwan) Earthquake: Geomorphic characteristics and responses of man-made structures.” Bull. Seismol. Soc. Am., 91(5), 930–952.
Lambe, T. W. (1973). “Predictions in soil engineering.” Geotechnique, 23(2), 149–202.
Muir Wood, D. (2002). “Some observations of volumetric instabilities in soils.” Int. J. Solids Struct., 39, 3429–3449.
Muir Wood, D., and Stone, K. J. L. (1994). “Some observations of zones of localisation in model tests on dry sand.” Localisation and bifurcation theory for soils and rocks, R. Chambon, J. Desrues, and I. Vardoulakis, eds., Balkema, Rotterdam, The Netherlands, 155–164.
Nakai, T., Muir Wood, D., and Stone, K. J. L. (1995). “Numerical calculations of soil response over a displacing basement.” Soils Found., 35(2), 25–35.
Pietruszezak, S. T., and Mroz, Z. (1981). “Finite element analysis of deformation of strain softening materials.” Int. J. Numer. Methods Eng., 17, 327–334.
Roth, W. H., Scott, R. F., and Austin, I. (1981). “Centrifuge modelling of fault propagation through alluvial soils.” Geophys. Res. Lett., 8(6), 561–564.
Sanford, A. R. (1959). “Analytical and experimental study of simple geologic structures.” Bull. Geol. Soc. Am., 70, 19–52.
Slemmons, D. B. (1957). “Geological effects of the Dixie Valley-Fairview Peak, Nevada earthquakes of December 16, 1954.” Bull. Seismol. Soc. Am., 47(4), 353–375.
Stone, K. J. L., and Muir Wood, D. (1992). “Effects of dilatancy and particle size observed in model tests on sand.” Soils Found., 32(4), 43–57.
Taylor, C. L., Cline, K. M., Page, W. D., and Schwartz, D. P. (1985). “The Borah Peak, Idaho earthquake of October 28, 1983—Surface faulting and other phenomena.” Earthquake Spectra, 2(1), 23–49.
Walters, J. V., and Thomas, J. N. (1982). “Shear zone development in granular materials.” Proc., 4th Int. Conf. on Numerical Methods in Geomechanics, Vol. I, 263–274.
White, D. J., Take, W. A., and Bolton, M. D. (2003). “Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry.” Geotechnique, 53(7), 619–631.
White, R. J., Stone, K. J. L., and Jewel, R. J. (1994). “Effect of particle size on localization development in model tests on sand.” Centrifuge 94, C. F. Leung, F. H. Lee, and T. S. Tan, eds., Balkema, Rotterdam, The Netherlands, 817–822.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Jan 23, 2007
Accepted: May 29, 2008
Published online: Mar 1, 2009
Published in print: Mar 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.