Fall Cone Test to Characterize Shear Strength of Organic Sediments
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 135, Issue 1
Abstract
In this paper, the results of the standard percussion cup test, the penetration cone test, and the laboratory vane test performed on organic sediments and kaolin are discussed. First, the relationship between the water content and the cone penetration depth is explored. Second, the relationship between the shear strength, using the laboratory vane apparatus, and the water content is investigated. Finally, the relationship between the shear strength and the penetration depth of the cone, at different levels of water content, is explored.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research reported herein was conducted as part of a project to develop alternative solutions to immersion for dredged sediments sponsored by a regional program PREDIS (Plan-Régional-d"Elimination-des-Déchets-Industriels-Spéciaux) and industrials. Their support is gratefully acknowledged, as is the help provided by the technicians under the supervision of the writers.
References
Atterberg, A. (1911). “Lorornas Forhallande Till Vatten, Deras Plasticitets-granser och Plastitesgrader.” Kungliga Lantbruksakademiens Handlingar och Tidskrift, 50(2), 132–158.
Belviso, R., Ciampoli, S., Cotecchia, V., and Federico, A. (1985). “Use of the cone penetrometer to determine consistency limits.” Ground Eng., 18(5), 21–22.
“British standard methods of test for soils for civil engineering purposes.” (1975). British Standard: BS 1377.
Budhu, M. (1985). “The effect of clay content on liquid limit from fall cone and the British cup device.” Geotech. Test. J., 8(2), 91–95.
Casagrande, A. (1932). “Research on the Atterberg limits of soils.” Public Roads, 13, 121–136.
Feng, T. W. (2000). “Fall cone penetration and water content relationship of clays.” Geotechnique, 50(2), 181–187.
“Grain size distribution—Laser diffraction method—Part 1.” (2000). AFNOR: ISO 13320.
Hansbo, S. (1957). “A new approach to the determination of the shear strength of clays by the fall cone test.” Swedish Geotech. Inst. Proc., No. 14, Geotechnical Institute, Stockholm, 7–48.
Harisson, J. A. (1988). “Using the BS cone penetrometer for the determination of the plastic limits of soils.” Geotechnique, 38(3), 433–438.
Karlsson, R. (1961). “Suggested improvements in the liquid limit test, with reference to flow properties of remoulded clays.” Proc., 5th Int. Conf. on Soil Mechanics and Foundation Engineering, Paris, 171–184.
Kodikara, J. K., Seneviratne, H. N., and Wijayakulasooryia, C. V. (1986). “Evaluation of plastic limit and plasticity index by cone penetrometer.” Proc., Asian Regional Symp. on Geotechnical Problems and Practices in Foundation Engineering, Vol. 1, National Building Research Organisation, Sri Lanka, 229–233.
Kodikara, J. K., Seneviratne, H. N., and Wijekulasuriya, C. V. (2006). “Discussion on using a small ring and fall-cone to determine the plastic limit by Tao-Wei Wang.” J. Geotech. Geoenviron. Eng., 132(2), 276–278.
Koumoto, T., and Houlsby, G. T. (2001). “Theory and practice of the fall cone test.” Geotechnique, 51(8), 701–712.
Kumapley, N. K., and Boakye, S. Y. (1980). “The use of cone penetrometers for determination of the liquid limits of soils of flow plasticity.” Proc., 7th Regional Conf. for Africa on Soil Mechanics and Foundation Engineering, 167–170.
Leflaive, E. (1972). “Les limites d’Atterberg et le pénétromètre à cone.” Bulletin des Laboratories des Ponts et Chaussees, 50, 123–131.
Mendoza, M. J., and Orozco, M. (1999). “Fast and accurate techniques for determination of water content in soils.” Geotech. Test. J., 22(4), 301–307.
Sherwood, P. T., and Ryley, M. D. (1970). “An investigation of a cone-penetrometer method for the determination of the liquid limit.” Geotechnique, 20(2), 203–208.
“Soils: Investigation and testing—Atterberg limits determination—Part I: Liquid limit—Cone penetrometer method.” (1995). AFNOR: NF P94 052 1.
“Soils: Investigation and testing—Determination of Atterberg’s limits—Liquid limit test using Casagrande apparatus-plastic limit test on rolled thread.” (1993). AFNOR: NF P94 051.
“Soils: Investigation and testing—Determination of the organic matter content—Ignition method.” (1998). AFNOR: XP P94 047.
“Soils: Investigation and testing—Determination of the water content of materials—Oven drying method.” (1995). AFNOR: NF P94 050.
Wood, D. M. (1982). “Cone penetrometer and liquid limit.” Geotechnique, 32(1), 152–157.
Wood, D. M. (1985). “Some fall cone tests.” Geotechnique, 35(1), 64–68.
Wood, D. M., and Wroth, C. P. (1978). “The use of the cone penetrometer to determine the plastic limit of soils.” Ground Eng., 11(3), 37.
Wroth, C. P., and Wood, D. M. (1978). “The correlation of index properties with some basic engineering properties of soils.” Can. Geotech. J., 15(2), 137–145.
Terzaghi, K., and Peck, R. B. (1948). Soil mechanics in engineering practice, Wiley, New York.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Sep 19, 2006
Accepted: Apr 22, 2008
Published online: Jan 1, 2009
Published in print: Jan 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.