Characterization of Cemented Sand by Experimental and Numerical Investigations
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 134, Issue 7
Abstract
In this study, the effects of cementation on the stress–dilatancy and strength of cemented sand are investigated through experimental characterizations using triaxial tests and numerical simulations using the discrete element method. At small strains, dilatancy is hindered by the intact bonding network that produces a web-patterned force chain. After yielding, the increase in the dilatancy accelerates. Two competing but intimately related processes determine the peak strength: Bond breakages cause a strength reduction but the associated dilatancy leads to a strength increase. This finding and the experimental observation that the dilatancy at the peak state increases with increasing cement content explain why the measured peak-state strength parameters, and , are relevant to the cement content. With increasing strain, the force-chain distribution gradually changes to a thick columnar shape, which mostly appears inside the shear band. At the ultimate state, the cementing bonds remain to form clusters, even within the shear band. The existence of clusters not only helps maintain the overall volumetric dilation but also prevents force-chain buckling, which in turn increases the associated strength.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the Hong Kong Research Grants Council and Hong Kong University of Science and Technology (HIA04/05.EG02). The writers are grateful to the reviewers for their valuable comments.
References
Acar, Y. B., and El-Tahir, A. E. (1986). “Low strain dynamic properties of artificially cemented sand.” J. Geotech. Engrg., 112(11), 1001–1015.
Airey, D. W. (1993). “Triaxial testing of naturally cemented carbonate soil.” J. Geotech. Engrg., 119(9), 1379–1398.
Clough, G. W., Iwabuchi, J., Rad, N. S., and Kuppusamy, T. (1989). “Influence of cementation on liquefaction of sands.” J. Geotech. Engrg., 115(8), 1102–1117.
Clough, G. W., Sitar, N., Bachus, R. C., and Rad, N. S. (1981). “Cemented sands under static loading.” J. Geotech. Engrg. Div., 104(6), 799–817.
Collins, I. F. (2005). “The concept of stored plastic work or frozen elastic energy in soil mechanics.” Geotechnique, 55(5), 373–382.
Coop, M. R., and Atkinson, J. H. (1993). “The mechanics of cemented carbonate sands.” Geotechnique, 43(1), 53–67.
Cuccovillo, T., and Coop, M. R. (1999). “On the mechanics of structured sands.” Geotechnique, 49(6), 741–760.
Fakhimi, A., Riedel, J. J., and Labuz, J. F. (2006). “Shear banding in sandstone: Physical and numerical studies.” Int. J. Geomech., 6(3), 185–194.
Huang, J. T., and Airey, D. W. (1998). “Properties of artificially cemented carbonate sand.” J. Geotech. Geoenviron. Eng., 124(6), 492–499.
Ismail, M. A. (2000). “Strength and deformation behavior of calcite cemented calcareous soil.” Ph.D. dissertation, The Univ. of Western Australia, Perth, Australia.
Ismail, M. A., Joer, H. A., Sim, W. H., and Randolph, M. F. (2002). “Effect of cement type on shear behavior of cemented calcareous soil.” J. Geotech. Geoenviron. Eng., 128(6), 520–529.
Iwashita, K., and Oda, M. (1998). “Rolling resistance at contacts in simulation of shear band development by DEM.” J. Eng. Mech., 124(3), 285–292.
Ladd, R. S. (1978). “Preparing test specimens using under-compaction.” Geotech. Test. J., 1, 16–23.
Lade, P. V., and Overton, D. D. (1989). “Cementation effects in frictional materials.” J. Geotech. Engrg., 115(10), 1373–1387.
Lambe, T. W. (1960). “A mechanistic picture of shear strength of clay.” Proc., Soil Shear Strength Conf., 555–580.
Leroueil, S., and Vaughan, P. R. (1990). “The general and congruent effects of structure in natural soils and weak rocks.” Geotechnique, 40(3), 467–488.
Leung, S. C. (2005). “Mechanical characteristics of cemented sand—A particulate-scale study.” MPhil thesis, Dept. of Civil Engineering, Hong Kong Univ. of Science and Technology, HKSAR, China.
Li, X. S., Chan, C. K., and Shen, C. K. (1988). “An automatic triaxial testing system. Advanced triaxial testing of soil and rock.” Advanced triaxial testing of soil and rock, ASTM STP 977, ASTM, Philadelphia, 95–106.
Li, X. S., and Dafalias, Y. F. (2000). “Dilatancy for cohesionless soils.” Geotechnique, 50(4), 449–460.
Lo, S. C. R., Lade, P. V., and Wardani, S. P. R. (2003). “An experimental study of the mechanics of two weakly cemented soils.” Geotech. Test. J., 26(3), 1–14.
Mántaras, F. M., and Schnaid, F. (2002). “Cylindrical cavity expansion in dilatant cohesive-frictional materials.” Geotechnique, 52(5), 337–348.
Mitchell, J. K., and Soga, K. (2005). Fundamentals of soil behavior, 3rd Ed., Wiley, New York.
Oda, M., and Kazama, H. (1998). “Microstructure of shear bands and its relation to the mechanisms of dilatancy and failure of dense granular soils.” Geotechnique, 48(4), 465–481.
Radjai, F., Wolf, D. E., Jean, M., and Moreau, J. J. (1998). “Biomodal character of stress transmission in granular packing.” Phys. Rev. Lett., 80(1), 61–64.
Roscoe, K. H., and Schofield, A. N. (1963). “Mechanical behaviour of an idealised ‘wet’ clay.” 2nd European Conference on Soil Mechanics and Foundation Engineering (ECSMFE), Vol. 1, 47–54.
Rowe, P. W. (1962). “The stress-dilatancy relations for static equilibrium of an assembly of particles in contact.” Proc. R. Soc. London, Ser. A, 269, 500–527.
Rowe, P. W. (1969). “The relation between the shear strength of sands in triaxial compression, plane strain and direct shear.” Geotechnique, 19(1), 75–86.
Santamarina, J. C., Klein, A., and Fam, M. A. (2001). Soils and waves, Wiley, New York.
Saxena, S. K., Avramidis, A. S., and Reddy, K. R. (1988). “Dynamic moduli and damping ratios for cemented sands at low strains.” Can. Geotech. J., 25(2), 353–368.
Saxena, S. K., and Lastrico, R. M. (1978). “Static properties of lightly cemented sand.” J. Geotech. Engrg. Div., 104(12), 1449–1465.
Schnaid, F., Lehane, B. M., and Fahey, M. (2004). “In situ test characterization of unusual geomaterials.” Proc., 2nd Int. Conf. on Site Characterizations, ISC-2, 49–73.
Schnaid, F., Prietto, P. D. M., and Consoli, N. C. (2001). “Characterization of cemented sand in triaxial compression.” J. Geotech. Geoenviron. Eng., 127(10), 857–868.
Sharma, S. S., and Fahey, M. (2003). “Degradation of stiffness of cemented calcareous soil in cyclic triaxial tests.” J. Geotech. Geoenviron. Eng., 129(7), 619–629.
Skinner, A. (1969). “A note on the influence of interparticle friction on the shearing strength of a random assembly of spherical particles.” Geotechnique, 19(1), 150–157.
Thomas, P. A., and Bray, J. D. (1999). “Capturing nonspherical shape of granular media with disk clusters.” J. Geotech. Geoenviron. Eng., 125(3), 169–178.
Thornton, C. (2000). “Numerical simulations of deviatoric shear deformation of granular media.” Geotechnique, 50(1), 43–53.
Wang, Y. H., and Leung, S. C. (2008). “A particulate-scale investigation of cemented sand behavior.” Can. Geotech. J., 45(1), 29–44.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jan 18, 2007
Accepted: Oct 19, 2007
Published online: Jul 1, 2008
Published in print: Jul 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.