Laboratory Analysis of Carbon Dioxide Hydrate-Bearing Sands
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 134, Issue 4
Abstract
Gas hydrates are ice-like compounds composed of water molecules that encapsulate natural gas molecules in a very compact form. Three groups of hydrate-bearing sand specimens were formed using a specialized triaxial test apparatus at different temperature and different pressure to examine the physical effects, such as stress and deformation changes, of hydrate dissociation on the surrounding soil. The triaxial test data indicate: (1) the higher the pressure, the higher hydrate content; (2) the lower the temperature, the higher hydrate content; (3) the greater the amount of gas hydrate initially present in the specimen, the greater the reduction of effective stress upon dissociation and the lower strength; and (4) dissociation of even a small percentage of gas hydrates will cause a dramatic reduction in the soil strength and could lead to failure.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writer would like to thank Alberta Ingenuity Fund and Canadian Foundation for Innovation for the funding provided for both infrastructure and operating costs for this research laboratory.
References
Buffett, B. A., and Zatsepina, O. Y. (2000). “Formation of gas hydrate from dissolved gas in natural porous media.” Arch. Fisiol, 164(1–2), 69–77.
Grozic, J. L. H., and Kvalstad, T. J. (2001). “Effect of gas on deepwater marine sediments.” XVth Int. Conf. on Soil Mechanics and Geotechnical Engineering, 2289–2294.
Kliner, J. R., and Grozic, J. L. H. (2006). “Determination of synthetic hydrate content in sand specimens using dielectrics.” Can. Geotech. J., 43(6), 551–562.
Kvenvolden, K. A. (2000). “Natural gas hydrate: Introduction and history of discovery.” Natural gas hydrate in oceanic and permafrost environments, M. D. Max, ed., Kluwer Academic, Dordrecht, The Netherlands, 9–16.
Masui, A., Hironori, H., Yuiji, O., and Kazuo, A. (2005). “Effects of methane hydrate formation on shear strength of synthetic methane hydrate sediments.” ISOPE-2005, 15th Int. Offshore and Polar Engineering Conf., Vol. 1, 364–369.
Mikami, J., Masuda, Y., Uchida, T., Satoh, T., and Takeda, H. (2000). “Dissociation of natural gas hydrates observed by X-ray CT scanner.” Ann. N.Y. Acad. Sci., 912, 1011–1020.
Parameswaran, V. R., Paradis, M., and Handa, Y. P. (1989). “Strength of frozen sand containing tetrahydrofuran hydrate.” Can. Geotech. J., 26(3), 479–483.
Santamarina, J. C., Francisca, F., Yun, T.-S., Lee, J.-Y., Martin, A. I., and Ruppel, C. (2004). “Mechanical, thermal, and electrical properties of hydrate-bearing sediments.” AAPG Hedberg Conf., Gas Hydrates: Energy Resource Potential and Associated Geologic Hazards.
Sego, D. C., and Wittebolle, R. J. (1984). “Engineering behaviour of a sand containing gas hydrates.” Cold Regions Specialty Conf., 89–601.
Skempton, A. W. (1954). “The pore pressure coefficients A and B.” Ceram. Trans., 4(4), 143–147.
Stern, L. A., Kirby, S. H., and Durham, W. B. (1998). “Polycrystalline methane hydrate: Synthesis from superheated ice, and low-temperature mechanical properties.” Energy Fuels, 12(2), 201–211.
Sultan, N., Cochonat, P., Foucher, J. P., and Mienert, J. (2004). “Effect of gas hydrates meling on seafloor slope instability.” AV Commun. Rev., 231(1–4), 379–401.
Winters, W. J., Dillion, W. P., Pecher, I. A., and Mason, D. H. (2000). “GHASTLI-Determining physical properties of sediment containing natural and laboratory formed gas hydrate.” Natural gas hydrate in oceanic and permafrost environments, M. D. Max, ed., Kluwer Academic, Dordrecht, The Netherlands, 311–322.
Winters, W. J., Waite, W. F., Mason, D. H., and Gilbert, L. Y. (2006). “Physical properties of repressurized sediment from Hydrate Ridge.” Proc. of the Ocean Drilling Program, Scientific Results, A. M. Trehu, G. Bohrmann, M. E. Torres, and F. S. Colwell, eds., Vol. 204.
Winters, W. J., Waite, W. F., Mason, D. H., Gilbert, L. Y., and Pecher, J. A. (2007). “Methane gas hydrate effect on sediment acoustic and strength properties.” J. Pet. Sci. Eng., 56(1–3), 127–135.
Winters, W. J., Waite, W. F., Pecher, I. A., Mason, D. H., Hutchinson, D. R., Gilbert, L. Y., Birchwood, R. A., Noeth, S., and Jones, E. (2004). “Comparison of methane gas hydrate formation on physical properties of fine- and course-grained sediments.” AAPG Hedberg Conf., Gas Hydrates: Energy Resource Potential and Associated Geologic Hazards.
Wright, J. F., Dallimore, S. R., and Nixon, F. M. (1999). “Influences of grain size and salinity on pressure-temperature thresholds for methane hydrate stability in JAPEX/JNOC/GSC Mallik 2L-38 gas hydrate research well sediments.” Scientific results from JAPEX/JNOC/GSC Mallik 2L-38 gas hydrate research well, Mackenzie Delta, northwest territories, Canada, S. R. Dallimore, T. Uchida, and T. S. Collett, eds., Geological Survey of Canada, Bulletin No. 544, 229–240.
Wu, L. (2006). “Laboratory analysis of carbon-dioxide hydrate-bearing sands.” MSc thesis, Univ. of Calgary, Calgary, Alta., Canada.
Xu, W., and Germanovich, L. N. (2006). “Excess pore pressure resulting from methane hydrate dissociation in marine sediments: A theoretical approach.” J. Geophys. Res., 111(B1), 1–12.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Feb 28, 2007
Accepted: Jul 31, 2007
Published online: Apr 1, 2008
Published in print: Apr 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.