Model Tests on Discontinuities in Subsurface Barrier Installed by the Vibrating Beam Method
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 134, Issue 4
Abstract
In the present note, the susceptibility to necking of a subsurface barrier installed by the vibrating beam method in fine-grained soils is investigated by physical model tests. Two soils are investigated, a clayey soil and a silty soil. The model soil is prepared by moist tamping. The recipe of slurry in the model tests is widely used in the foundation engineering industry. The dynamic loading exerted by the vibration of the adjacent panel is simulated by a shake table. The test results show that soil plasticity and water content are the major influence factors on the susceptibility to necking. The plasticity index can be used as an indicator for the susceptibility to necking of subsurface barrier installed by the vibrating beam method in fine-grained soils. Other influence factors on necking are also investigated and their implications for practice are discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This paper is based on two MSc theses in our institute. We wish to thank our students Dipl.-Ing. Andreas Lutschounig and Dipl.-Ing. Thomas Wieczorek.
References
Asada, M., and Horiuchi, S. (2005). “High-density bentonite slurry for seepage barriers.” J. Mater. Civ. Eng., 17(2), 178–187.
Brunette, P. T., and Schmednecht, E. J. (1994). “Vibrating beam, curtain wall, and jet grouting used to form a vertical barrier wall.” Ground Eng., June/July.
Falaciński, P., Garbulewski, K., Kledyński, Z., Skutnik, Z., and Ziarkowska, K. (2005). “Fluidised fly-ash cement-bentonite cut-off walls in flood protection.” Archives of Hydroengi. Environ. Mech., 52(1), 7–20.
Jazdanian, A. D., Reddy, K. R., Gonzalez, J. V., and Ala, P. (2004). “Evaluation of different slurry materials for containment wall construction at a dense nonaqueous phase liquid-contaminated site.” Pract. Period. Hazard. Toxic Radioact. Waste Manage., 8(3), 173–180.
Kleist, F. (1999). “The system permeability of thin walls.” Publication series No. 87, Institute of Hydraulic and Water Resources Engineering, Technical Univ. of Munich, Munich, Germany.
Martin, A., Monzlinger, H., Papp, R., Schmitt, P. P., and Schroll, W. (1986). “Schmalwände am Lech.” Wasserwirtschaft, 76(12), 548–612.
ÖNORM B 4452. (2006). “Cut-off walls.” Austrian Norm Institute, Vienna, Austria.
Pearlman, L. (1999). Subsurface containment and monitoring systems: Barriers and beyond, EPA, Washington, D.C.
Rumer, R. R., and Ryan, M. E. (1995). Barrier containment technologies for environmental remedial applications, Wiley, New York.
Schroll, W. (1992). “Allgemeine Stellungnamhe zur Anwendungskriterien bei der Schmalwandherstellung.” Wasserwirtschaft, 86(12), 596–600.
Seed, H. B., Idriss, I. M., and Arango, I. (1983). “Evaluation of liquefaction potential using field performance data.” J. Geotech. Engrg., 109(3), 458–482.
Strobl, Th. (1994). Neue Erkenntnisse bei Schmaldichtungswänden mit einem Vorschlag für geänderte Ausschreibungsgrundlangen, German Geotechnical Society, Baugrundtagung, Germany, 361–366 (in German).
Wang, W. S. (1979). Some findings in soil liquefaction, Water Conservancy and Hydroelectric Power Scientific Research Institute, Beijing.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jan 19, 2007
Accepted: Aug 16, 2007
Published online: Apr 1, 2008
Published in print: Apr 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.