Reliability Assessment of Basal-Heave Stability for Braced Excavations in Clay
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 134, Issue 2
Abstract
One potential failure mechanism that needs to be considered for the design of braced excavations in soft clays is basal-heave instability. Many uncertainties are associated with the calculation of the basal-heave factor of safety, including the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk-based approach to failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the potential for the reliability index–based approach for evaluating the basal-heave stability of braced excavations in clay. By using basic structural reliability concepts that reflect the degree of uncertainty of the underlying random variables in the analyses, engineers will have increased awareness of the uncertainties and their effects on the probability of failure. This study shows that the assumption of a linear limit state (failure) surface can be used to provide reasonable estimates of the reliability index and the probability of failure. Mathematical expressions, tables, and charts have been provided to estimate the probability of basal-heave failure for wide and deep excavations.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ang, A. H. S., and Tang, W. H. (1984). Probability concepts in engineering planning and design, Vol. II—Decision, risk and reliability, Wiley, New York.
Baecher, G. B., and Christian, J. T. (2003). Reliability and statistics in geotechnical engineering, Wiley, New York.
Bjerrum, L., and Eide, O. (1956). “Stability of strutted excavations in clay.” Geotechnique, 6(1), 32–47.
Cai, F., Ugai, K., and Hagiwara, T. (2002). “Base stability of circular excavations in soft clay.” J. Geotech. Geoenviron. Eng., 128(8), 702–706.
Chang, M. F. (2000). “Basal stability analysis of braced cuts in clay.” J. Geotech. Geoenviron. Eng., 126(3), 273–275.
Cherubini, C. (2000). “Probabilistic approach to the design of anchored sheet pile walls.” Comput. Geotech., 26(3–4), 309–330.
Christian, J. T. (2004). “Geotechnical engineering reliability: How well do we know what we are doing?” J. Geotech. Geoenviron. Eng., 130(10), 985–1003.
Cornell, C. A. (1969). “A probability-based structural code.” J. Am. Concr. Inst., 66(12), 974–985.
Duncan, J. M. (2000). “Factors of safety and reliability in geotechnical engineering.” J. Geotech. Geoenviron. Eng., 126(4), 307–316.
Eide, O., Aas, G., and Josang, T. (1972). “Special applications of cast-in-place walls for tunnels in soft clay in Oslo.” Pub. 91, Norwegian Geotechnical Institute, Oslo, 63–72.
Goh, A. T. C. (1994). “Estimating basal-heave stability for excavations in soft clay.” J. Geotech. Engrg., 120(8), 1430–1436.
Goh, A. T. C., and Kulhawy, F. H. (2005). “Reliability assessment of serviceability performance of braced retaining walls using a neural network approach.” Int. J. Numer. Analyt. Meth. Geomech., 29(6), 627–642.
Hasofer, A. M., and Lind, N. C. (1974). “Exact and invariant second-moment code format.” J. Engrg. Mech. Div., 100(1), 111–121.
Lacasse, S. (1999). “The importance of dealing with uncertainties in foundation analysis.” Proc., 12th European Conf. Soil Mech. & Geotech. Eng., Balkema, Rotterdam, The Netherlands, 1, 385–392.
Li, K. S. (1992). “Some common mistakes in probabilistic analysis of slopes.” Proc., 6th Int. Symp. on Landslides, Balkema, Rotterdam, The Netherlands, 1, 475–480.
Li, K. S., Lee, I. K., and Lo, S. C. R. (1993). “Limit state design in geotechnics.” Proc., Probabilistic Methods in Geotech. Eng., Balkema, Rotterdam, The Netherlands, 29–44.
Low, B. K. (2005). “Reliability-based design applied to retaining walls.” Geotechnique, 55(1), 63–75.
Low, B. K., Gilbert, R. B., and Wright, S. G. (1998). “Slope reliability analysis using generalized method of slices.” J. Geotech. Geoenviron. Eng., 124(4), 350–362.
Melchers, R. E. (1987). Structural reliability: Analysis and prediction, Ellis Horwood Ltd., Chichester, England.
Nowak, A. S. (2000). Reliability of structures, McGraw-Hill, New York.
Phoon, K. K., and Kulhawy, F. H. (1999). “Characterization of geotechnical variability.” Can. Geotech. J., 36(4), 612–624.
Rackwitz, R., and Fiessler, B. (1978). “Structural reliability under combined random load sequences.” Comput. Struct., 9(5), 489–494.
Ramachandran, K. (1988). “Reliability analysis of propped embedded cantilever walls.” Proc., 6th Int. Conf. Numerical Methods in Geomechanics, Innsbruck, 2, Balkema, Rotterdam, The Netherlands, 1225–1230.
Skempton, A. W. (1951). “The bearing capacity of clays.” Proc., British Bldg. Research Congress, Inst. Civil. Engrs., London, 1, 180–189.
Tang, W. H., Yuceman, M. S., and Ang, A. H. S. (1971). “Reliability analysis and design of braced excavation systems.” Proc., 1st Int. Conf. Applications of Statistics and Probability in Soil & Structural Eng., Univ. of Hong Kong, Hong Kong, 187–202.
Terzaghi, K. (1943). Theoretical soil mechanics, Wiley, New York.
Terzaghi, K., Peck, R. B., and Mesri, G. (1996). Soil mechanics in engineering practice, 3rd Ed., Wiley, New York.
Ukritchon, B., Whittle, A. J., and Sloan, S. W. (2003). “Undrained stability of braced excavations in clay.” J. Geotech. Geoenviron. Eng., 129(8), 738–755.
Vanmarcke, E. H. (1977). “Probabilistic modeling of soil profiles.” J. Geotech. Engrg. Div., 103(11), 1227–1246.
Wolff, T. F., Demsky, E. C., Schauer, J., and Perry, E. (1996). “Reliability assessment of dike and levee embankments.” Uncertainty in the geologic environment: From theory to practice, GSP 58, C. D. Shackelford, P. P. Nelson, and M. J. S. Roth, eds., ASCE, Reston, 1, 636–650.
Wong, K. S., and Goh, A. T. C. (2002). “Basal heave stability for wide excavations.” Proc., 3rd Int. Symp. Geotechnical Aspects of Underground Construction in Soft Ground, Int. Society Soil Mech. and Geotech. Engrg., Toulouse, 699–704.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jul 6, 2006
Accepted: Jan 16, 2007
Published online: Feb 1, 2008
Published in print: Feb 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.