Use of In Situ Air Flow Measurements to Study Permeability in Cracked Clay Soils
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 133, Issue 12
Abstract
The work describes in situ measurements of crack induced permeability as a function of depth, (down to ), in clay soils at two field sites, using the gas flow technique described in an earlier study. The gas flow response to applied pressure was found to exhibit a significant nonlinearity at all depths indicating non-Darcian flow despite the fact that the flow was likely to be well within the laminar flow regime. Application of three-dimensional finite-element models to describe the gas flow revealed that the nonlinearity is likely to be an intrinsic behavior related to the soil-gas flow interaction. The Forchheimer compressible flow equation successfully simulated the behavior at all depths. The viscous and inertial permeability parameters obtained from this analysis showed a wide range of values which were closely correlated to the pore-water content of the soil medium, clearly showing the influence of ped swelling on the contraction of macrovoid channels in the structured clay soil.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to acknowledge the contribution of Mr. Hlwan Moe in the development of the basic air-flow technique and for his assistance in carrying out the fieldwork. This research has been carried out with the financial support from the Australian Research Council (ARC). The numerical modeling was undertaken using FEMLAB version 2.1 (Comsol Inc., United States).
References
Andrade, J. S., Jr., Costa, U. M. S., Almeida, M. P., Makse, H. A., and Stanley, H. E. (1999). “Inertial effects on fluid flow through disordered porous media.” Phys. Rev. Lett., 82(6), 5249–5252.
Bennethum, L. S., and Giorgi, T. (1997). “Generalized Forchheimer equation for two-phase flow based on hybrid mixture theory.” Transp. Porous Media, 26(3), 261–275.
Blackwell, P. S., Ringrose-Voase, A. J., Jayawardane, N. S., Olsson, K. A., McKenzie, D. C., and Mason, W. K. (1990). “The use of air-filled porosity and intrinsic permeability to air to characterize structure of macropore space and saturated hydraulic conductivity of clay soils.” J. Soil Sci., 41, 215–228.
Costa, U. M. S., Andrade, Jr., J. S., Makse, H. A., and Stanley, H. E. (1999). “The role of inertia on fluid flow through disordered porous media.” Physica A, 266(1–4), 420–424.
Darcy, H. (1856). “Les fountaines publique de la Ville de Dijon.” Dynamics of fluids in porous media, Bear, J., ed., Elsevier, New York.
Dullien, F. A. L., and Azzam, M. I. S. (1973). “Flow rate-pressure gradient measurements in periodically non-uniform capillary tubes.” AIChE J., 19(2), 222–229.
Fityus, S. G., and Smith, D. W. (2004). “The development of a residual soil profile from a mudstone in a temperate climate.” Eng. Geol. (Amsterdam), 74, 39–56.
Fityus, S. G., Smith, D. W., and Allman, M. A. (2004a). “Expansive soil test site near Newcastle.” J. Geotech. Geoenviron. Eng., 130(7), 686–695.
Fityus, S. G., Smith, D. W., Imre, E., and Rajkai, K. (2004b). “Model framework for structure and volume changes in cracking expansive clay soils.” Proc., 9th ANZ Geomechanics Conf., Auckland, New Zealand, 598–604.
Forchheimer, P. (1914). Hydrolik, Tuebner, Leipzig, Berlin, 116–118.
Hanks, R. W. (1963). “The laminar-turbulent transition for flow in pipes, concentric annuli, and parallel plates.” AIChE J., 9(1), 45–48.
Head, K. H. (1994). Manual of soil laboratory testing, permeability, shear strength and compressibility tests, Vol. 2, Pentech Press, London.
Holland, D. F., Yitayew, M., and Warrick, A. W. (2000). “Measurement of subsurface unsaturated hydraulic conductivity.” J. Irrig. Drain. Eng., 126(1), 21–27.
Innocentini, M. D. M., Pardo, A. R. F., and Pandolfelli, V. C. (2000). “Influence of air compressibility on the permeability evaluation of refractory castables.” J. Am. Ceram. Soc., 83(6), 1536–1538.
Innocentini, M. D. M., Pardo, A. R. F., Salvini, V. R., and Pandolfelli, V. C. (1999). “How accurate is Darcy’s Law for refractories.” Am. Ceram. Soc. Bull., 78(11), 64–68.
Iversen, B. V., Moldrup, P., and Loll, P. (2004). “Runoff modelling at two field slopes: use of in situ measurements of air permeability to characterize spatial variability of saturated hydraulic conductivity.” Hydrolog. Process., 18, 1009–1026.
Iversen, B. V., Schjønning, P., Poulsen, T. G., and Moldrup, P. (2001). “In situ, on-site and laboratory measurements of soil air permeability: Boundary conditions and measurement scale.” Soil Sci., 166(2), 97–106.
Klinkenberg, L. J. (1941). The permeability of porous media to liquid and gases, American Petroleum Institute, New York.
Liang, P., Bowers, C. G., Jr., and Bowen, H. D. (1995). “Finite element model to determine the shape factor for soil air permeability measurements.” Trans. ASAE, 38(4), 997–1003.
Loll, P., Moldrup, P., Schjønning, P., and Riley, H. (1999). “Predicting saturated hydraulic conductivity from air permeability: Application in stochastic water infiltration modeling.” Water Resour. Res., 35(8), 2387–2400.
Moe, H., Fityus, S. G., and Smith, D. W. (2003). “Study of a cracking network in residual expansive clay.” Proc., 2nd Asian Conf. on Unsaturated Soils (Unsat Asia 2003), Osaka, Japan, 149–154.
Richardson, J. T., Peng, Y., and Remue, D. (2000). “Properties of ceramic foam catalyst supports: Pressure drop.” Appl. Catal., A, General 204, 19–32.
Wells, T., Fityus, S., Smith, D. W., and Moe, H. (2006). “The indirect estimation of hydraulic conductivity of soils using measurements of gas permeability. I: Laboratory testing with dry granular soils.” Australian J. Soil Research, 44, 719–725.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: May 11, 2006
Accepted: Mar 25, 2007
Published online: Dec 1, 2007
Published in print: Dec 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.