Discussion of “Estimation of Bearing Capacity of Circular Footings on Sands Based on Cone Penetration Test” by Junhwan Lee and Rodrigo Salgado
This article is a reply.
VIEW THE ORIGINAL ARTICLEThis article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 132, Issue 11
1090-0241(2006)132:11(1513)/asset/95772fd2-39ec-4c32-884e-c4973bc33c7c/assets/(asce)1090-0241(2006)132:11(1513).fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
Bolton, M. D. (1986). “The strength and dilatancy of sands.” Geotechnique, 36(1), 65–78.
Bolton, M. D., and Lau, C. K. (1993). “Vertical bearing capacity factors for circular and strip footings on Mohr–Coulomb soil.” Can. Geotech. J., 30, 1024–1033.
Briaud, J. L., and Gibbens, R. (1994). “Test and prediction results for five large spread footings on sand.” Predicted and measured behavior of five spread footings on sand, Geotechnical Special Publication No. 41, ASCE, New York, 92–128.
Brinch Hansen, J. (1970). “A revised and extended formula for bearing capacity.” Bulletin No. 28, Danish Geotechnical Institute, Copenhagen, Denmark.
De Beer, E. E. (1965). “Influence of the mean normal stress on the shearing strength of sand.” Proc., 6th Int. Conf. on Soil Mech. and Found. Engrg., Vol. 1, 165–169, Montreal, Canada.
De Beer, E. E. (1970). “Experimental determination of the shape factors and the bearing capacity factors of sand.” Geotechnique, 20(4), 387–411.
Gibbens, R., and Briaud, J. L. (1994). “Data and prediction request for the spread footing prediction event.” Predicted and measured behavior of five spread footings on sand, Geotechnical Special Publication No. 41, ASCE, New York, 11–85.
Ko, H. Y., and Davidson, L. W. (1973). “Bearing capacity of footings in plane strain.” J. Soil Mech. and Found. Div., 99(1), 1–23.
Michalowski, R. L. (1997). “An estimate of the influence of soil weight on bearing capacity using limit analysis.” Soils Found., 37(4), 57–64.
Perkins, S., and Madson, C., (2000). “Bearing capacity of shallow foundations on sand: A relative density approach.” J. Geotech. Geoenviron. Eng., 126(6), 521–530.
Rodríguez-Roa, F. (1977). “Finite-element analysis of axisymmetric foundations by using a new elastoplastic stress-strain theory for cohesionless soil.” Ph.D. thesis, Universidad Politécnica de Madrid, Spain (in Spanish).
Rodríguez-Roa, F. (2000). “Observed and calculated load-settlement relationship in a sandy gravel.” Can. Geotech. J., 37, 332–342.
Rodríguez-Roa, F. (2003). “Observed and predicted behavior of Maipo River sand.” Soils Found., Tokyo, 43(5), 1–11.
Vesic, A. S. (1963). “Bearing capacity of deep foundations in sand.” National Academy of Sciences, National Research Council, Highw. Res. Rec., 39, 112–153.
Vesic, A. S. (1973). “Analysis of ultimate loads of shallow foundations.” J. Soil Mech. and Found. Div., 99(1), 45–73.
Villalobos, F. A. (2000). “Análisis teórico-experimental de la capacidad de soporte de fundaciones superficiales apoyadas sobre suelos arenosos.” MSc thesis, Pontificia Universidad Católica de Chile, Santiago, Chile (in Spanish).
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 132 • Issue 11 • November 2006
Pages: 1513 - 1515
Copyright
© 2006 ASCE.
History
Published online: Nov 1, 2006
Published in print: Nov 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.