Ground-Shotcrete Interaction of NATM Tunnels with High Overburden
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 131, Issue 7
Abstract
According to the New Austrian Tunneling Method (NATM), after excavation of a cross section of a tunnel, shotcrete is applied onto the tunnel walls, constituting a thin flexible, closed shell. Deformations, as well as the loading of the lining, are continuously monitored during construction, serving as input for the decision making process following the closed control cycle “excavation–monitoring–parameter adaptation–excavation”. The objective of this control cycle is to optimize the tunneling process with respect to cost, crew safety, and long-term tunnel stability. In this paper, questions related to this optimization process are addressed, dealing with the influence of driving parameters and changes in the in situ geological and geotechnical conditions on the deformation and loading of the shotcrete lining. Based on realistic material models for shotcrete and ground, axisymmetric analyses, allowing for consideration of the three-dimensional nature of the tunnel excavation, were performed. The assumption of axisymmetry represents a good approximation of the static conditions of tunnels with high overburden. The obtained results are presented in dimensionless form, providing new insights into the complex ground-shotcrete interaction in NATM tunneling.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bažant, Z. (1979). “Thermodynamics of solidifying or melting viscoelastic material.” J. Eng. Mech. Div., 105(6), 933–952.
Bernaud, D., and Rousset, G. (1992). “La nouvelle méthode implicite pour l’étude du dimensionnement des tunnels [The new implicit method for the study of the design of tunnels].” Rev. Fr. De Géotechnique, (in French), 60, 5–26.
Boldini, D., and Lembo-Fazio, A. (2001). “Numerical analysis of ground-shotcrete in tunnelling.” Proc., Int. Conf. Engineering Developments in Shotcrete, S. Bernard, ed., Balkema, Rotterdam, 71–77.
Cervera, M., Oliver, J., and Prato, T. (1998). “A thermochemomechanical model for the hydration and aging of concrete.” Computational Modelling of Concrete Structures, Proc., EUROC 1998 Conf., R. DeBorst, N. Bićanić, H. Mang, and G. Meschke, eds., Balkema, Rotterdam, 513–522.
Coussy, O. (1995). Mechanics of porous continua, Wiley, Chichester.
Duvaut, G., and Lions, J. (1972). Les Inequations en Mechanique et en Physique [The inequalities in mechanics and physics], Dunod, Paris (in French).
Freiesleben Hansen, P., and Pedersen, E. (1977). “Måleinstrument til kontrol af betons hardening [Measurement device for controlling hardening of concrete].” Nordisk Betong, 1, 21–25.
Ghaboussi, J., and Gioda, G. (1977). “On the time-dependent effects in advancing tunnels.” Int. J. Numer. Analyt. Meth. Geomech., 1, 249–269.
Graziani, A., Boldini, D., and Ribacchi, R. (2005). “Practical estimate of deformations and stress relief factors for deep tunnels supported by shotcrete.” Rock Mechanics and Rock Engineering.
Hellmich, C., Ulm, F.-J., and Mang, H. A. (1999). “Multisurface chemoplasticity. I: Material model for shotcrete.” J. Eng. Mech., 125(6), 692–701.
Lackner, R., Hellmich, C., and Mang, H. (2002a). “Constitutive modeling of cementitious materials in the framework of chemoplasticity.” Int. J. Numer. Methods Eng., 53(10), 2357–2388.
Lackner, R., Macht, J., Hellmich, C., and Mang, H. (2002b). “Hybrid analyses of segmented shotcrete tunnel linings in squeezing rock.” J. Geotech. Geoenviron. Eng., 128(4), 298–308.
Lackner, R., and Mang, H. (2003). “Scale transition in steel-concrete interaction. II: Applications.” J. Eng. Mech., 129(4), 403–413.
Meschke, G. (1996). “Consideration of aging of shotcrete in the context of a 3D viscoplastic material model.” Int. J. Numer. Methods Eng., 39, 3123–3143.
Nguyen-Minh, D., and Corbetta, F. (1991). “Nouvelles méthodes de calcul des tunnels rêvetus incluant l’effet du front de taille [New methods for the design of lined tunnels including the effect of tunnel face].” Proc., 7th Int. Symp. of Rock Mechanics, W. Wittke, ed., Vol. 2, 1335–1338, (in French).
Panet, M., and Guenot, A. (1982). “Analysis of convergence behind the face of a tunnel.” Tunnelling 82, Brighton, 197–204.
Ruetz, W. (1966). “Das Kriechen des Zementsteins im Beton und seine Beeinflussung durch gleichzeitiges Schwinden [Creep of cement in concrete and the influence of simultaneous shrinkage on this type of creep].” Deutscher Ausschuß für Stahlbeton, 183.
Sercombe, J., Hellmich, C., Ulm, F.-J., and Mang, H. A. (2000). “Modeling of early-age creep of shotcrete. I: Model and model parameters.” J. Eng. Mech., 126(3), 284–291.
Ulm, F.-J. (1998). “Couplages thermochémomécaniques dans les bétons: Un premier bilan. [Thermochemomechanical couplings in concretes: A first review].” Tech. Rep., Laboratories des Ponts et Chaussées, Paris, France (in French).
Ulm, F.-J., and Coussy, O. (1995). “Modeling of thermochemomechanical couplings of concrete at early ages.” J. Eng. Mech., 121(7), 785–794.
Ulm, F.-J., and Coussy, O. (1996). “Strength growth as chemo-plastic hardening in early age concrete.” J. Eng. Mech., 122(12), 1123–1132.
Wittmann, F. (1982). “Creep and shrinkage mechanics.” Creep and Shrinkage of Concrete Structures, Z. Bazant, F. Wittman, eds. Wiley, Chichester, 129–161.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Dec 26, 2001
Accepted: Jun 26, 2004
Published online: Jul 1, 2005
Published in print: Jul 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.