Rotation of Cantilever Sheet Pile Walls
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 131, Issue 2
Abstract
Cantilever sheet pile walls are used routinely to retain medium heights of earth in geotechnical practice. Earth pressures developed on either side of the sheet pile wall ensure its moment and force equilibrium. Cantilever sheet pile walls suffer rotation about a pivot point close to the base and generate passive and active earth pressures. Earlier methods to determine the pivot point either use iterative procedures or rely on centrifuge data or finite element analyses. In this paper a new method based on minimization of the moment ratio is proposed to determine the location of the pivot point. This method is applicable to both cohesionless and cohesive backfills. Consideration of moment equilibrium is sufficient to determine the pivot point and force equilibrium is automatically satisfied. The location of the pivot point obtained by this approach compared satisfactorily with the centrifuge and laboratory test data. The shear strength demand computed for these tests could predict when sheet pile walls became unstable. Finally the shear strength demand was linked to the shear strains and hence to the wall deflections that compare satisfactorily with experimental wall deflections.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bica, A. V. D., and Clayton, C. R. I. (1998). “An experimental study of the behaviour of embedded lengths of cantilever walls.” Geotechnique, 48(6), 731–745.
Bolton, M. D. (1991a). “Abutments for bridges designed to BS5400, Phase 1—Cantilever retaining walls on spread foundations.” TRRL Rep. No. 271, U.K.
Bolton, M. D. (1991b). “Geotechnical stress analysis for bridge abutment design.” TRRL Rep. No. 270, U.K.
Bolton, M. D., and Powrie, W. (1987). “Collapse of diaphragm walls retaining clay.” Geotechnique, 37(3), 335–353.
Bolton, M. D., and Powrie, W. (1988). “Behaviour of diaphragm walls in clay prior to collapse.” Geotechnique, 38(2), 167–189.
Bolton, M. D., Powrie, W., and Symons, I. F. (1989). “The design of stiff in-situ walls retaining overconsolidated clay, Part I—Short term behaviour.” Ground Eng., 22(9), 34-40.
Bolton, M. D., Powrie, W., and Symons, I. F. (1990). “The design of stiff in-situ walls retaining overconsolidated clay, Part II—Long term behaviour.” Ground Eng., 23(2), 22-28.
Bransby, P. L., and Milligan, G. W. E. (1975). “Soil deformations near cantilever sheet pile walls.” Geotechnique, 25(2), 175–195.
Broms, B. B. (1995). “Design of sheet pile walls.” Foundation engineering, Geotexts & Publications.
Chandrasekaran, V. S. (2001). “Numerical and centrifuge modelling in soil–structure interaction.” Indian Geotechnical J., 31(1), 11-72.
Clayton, C. R. I., and Milititsky, J. (1986). Earth pressure and earth retaining structures, Surrey University Press, London.
Day, R. A. (1999). “Net pressure analysis of cantilever sheet pile walls.” Geotechnique, 49(2), 231–245.
Jardine, R. J., Symes, M. J., and Burland, J. B. (1984). “The measurement of soil stiffness in the triaxial apparatus.” Geotechnique, 34(3), 323–340.
King, G. W. J. (1995). “Analysis of cantilever sheet-pile walls in cohesionless soil.” J. Geotech. Eng., 121(9), 629–635.
Padfield, C. J., and Mair, R. J. (1984). “The design of propped cantilever walls embedded in stiff clays.” CIRIA (Construction Industry Research and Information Association) Rep. No. 104, CIRIA, London.
Terzaghi, K. (1934a). “Large retaining wall tests. I. Pressure of dry sand.” Eng. News-Rec., 136–140.
Terzaghi, K. (1934b). “Large retaining wall tests. II. Pressure of dry sand.” Eng. News-Rec., 259–262.
Information & Authors
Information
Published In
Copyright
© 2004 ASCE.
History
Received: Apr 2, 2003
Accepted: Apr 3, 2004
Published online: Feb 1, 2005
Published in print: Feb 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.