Geosynthetic Reinforced Multitiered Walls
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 130, Issue 12
Abstract
Current design of mechanically stabilized earth (MSE) walls shows that the tensile stress in the reinforcement increases rapidly with height. To take advantage of both the aesthetics and the economics of MSE walls while considering high heights, multitiered walls are often used. In such walls, an offset between adjacent tiers is used. If the offset is large enough, the tensile stress in the reinforcement in lower tiers is reduced. However, a rational design methodology for multitiered MSE walls that accurately predicts wall performance is lacking. AASHTO 98 design guidelines are limited to two-tiered walls with zero batter. In fact, this design is purely empirical using “calibrated” lateral earth pressures adopted from limited guidelines developed for metallic strip walls. Empirical data available for multitiered walls is limited and it seems to be nonexistent for geosynthetic walls. In fact, generation of an extensive database for tiered walls is a major challenge since there are practically limitless configurations for such systems. As an alternative, this study presents the results of parametric studies conducted in parallel using two independent types of analyses: One is based on limiting equilibrium (LE) and one on continuum mechanics. The premise of this work is that if the two uncoupled analyses produce similar results, an acceptable level of confidence in the results can be afforded. This confidence stems from the fact that LE is currently being used for design of reinforced and unreinforced slopes (i.e., having a slope angle less than 70°); the agreement with continuum mechanics facilitates its extrapolation to use in MSE walls. Parametric studies were carried out to assess the required tensile strength as a function of reinforcement length and stiffness, offset distance, the fill and foundation strength, water, surcharge, and number of tiers. It is concluded that LE analyses may be extended to the analysis of multitiered walls.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ADAMA Engineering, Inc. (2002). ReSSA version 2.0., 〈www.GeoPrograms.com〉, Newark, Del.
2.
AASHTO ( 1998). Standard specifications for highway bridges, American Association of State Highway and Transportation Officials, Washington, DC.
3.
Baker, R., and Leshchinsky, D. (2001). “Spatial distribution of safety factors.” J. Geotech. Geoenviron. Eng., 127(2), 135–145.
4.
Bishop, A. W. (1955). “The use of the slip circle in the stability analysis of slopes.” Geotechnique, 5, 7–17.
5.
British Standard. ( 1995). “Code of practice for strengthened/reinforced soils and other fills.” BS8006, British Standards Institute, London.
6.
Dawson, E. M., Roth, W. H., and Drescher, A. (1999). “Slope stability analysis by strength reduction.” Geotechnique, 49(6), 835–840.
7.
Elias, V., and Christopher, B. R. ( 1997). “Mechanically stabilized earth walls and reinforced soil slopes—Design and construction guidelines.” Publ. No. FHWA-SA-96-071, FHWA Demonstration Project 82, Federal Highway Administration, Washington, D.C.
8.
Han, J., Leshchinsky, D., and Shao, Y., ( 2002). “Influence of tensile stiffness of geosynthetic reinforcements on performance of reinforced slopes.” Proc., Geosynthetics-7th ICG, Delmas, Gourc & Girard, eds., Swets and Zeitlinger, Lisse, 197–200.
9.
Itasca Consulting Group, Inc. ( 2002). FLAC/Slope user’s guide, 1st Ed., Minneapolis.
10.
Leshchinsky, D. ( 1999). “Stability of geosynthetic reinforced steep slopes.” Proc., Int. Symp. Slope Stability Engineering-IS-Shikoku’99, Slope Stability Engineering, N. Yagi, T. Yamagami, and J. C. Jiang, eds., Balkema, Rotterdam, The Netherlands, 49–66.
11.
Leshchinsky, D. ( 2002). “Design software for geosynthetic-reinforced soil structures.” Geotechnical Fabrics Report, 2(8), 44–49.
12.
National Concrete Masonry Association (NCMA). ( 1997). Design manual for segmental retaining walls, 2nd Ed., NCMA, Herndon, Va.
13.
San, K. C., Leshchinsky, D., and Matsui, T. (1994). “Geosynthetic reinforced slopes: Limit equilibrium and finite element analyses.” Soils Found., 34(2), 79–85.
14.
Spencer, E. (1967). “A method of analysis of the stability of embankments assuming parallel inter-slice forces.” Geotechnique, 17, 11–26.
15.
Ugai, K., and Leshchinsky, D. ( 1995). “Three-dimensional limit equilibrium and finite element analyses.” Soils and Foundat., 35(4), 1–7.
16.
Zienkiewicz, O. C., Humpheson, C., and Lewis, R. W. (1975). “Associated and nonassociated viscoplasticity and plasticity in soil mechanics.” Geotechnique, 25(4), 671–689.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 ASCE.
History
Published online: Nov 15, 2004
Published in print: Dec 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.