Uplift Behavior of Blade-Underreamed Anchors in Silty Sand
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 129, Issue 6
Abstract
To evaluate the uplift behavior of anchors installed by the blade underreaming system, a numerical model for anchors in silty sand has been developed in this study and the calculated results are compared to the results of full scale anchor pullout tests. Although the blade-underreamed anchor tends to be irregular in shape due to possible collapse of the borehole, the excavated anchor showed an underreamed body of approximately multiple-stepped shape. Despite the difference in shape, the numerical results indicate that the difference between the load–displacement curve of the multiple-stepped anchor and that of the conical shaped anchor is small. In addition, the anchorage behavior of conical shaped anchors calculated from this numerical model was in good agreement with those of full scale anchor tests. No sign of progressive soil yielding along the underreamed body was found from the numerical analysis. So, the pull-out capacity of this underreamed anchor increases more than linearly with the length of the underream. Since only a small underream angle is needed to generate a substantial increase in anchor pull-out resistance, the ultimate pull-out capacity of the blade-underreamed anchor is found to be higher than that of straight shaft anchor in silty sand.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Concrete Institute (ACI). (1995). “Building code requirements for reinforced concrete and commentary.” ACI 318-95, ACI 318 R-95, Farmington Hill, Mich.
Chen, F. W., and Han, D. J. (1988). Plastic for structural engineers, Springer, New York.
Deutsche Industrie Norm (DIN). (1988). Verpressanker fur Vorubergehende Zwecke im Lockergestein, Bemessung, Ausfuhrung und Prufung.
Hsu, S. T. (1996). “Anchorage behavior of vertical anchors in sands.” PhD thesis, National Taiwan Institute of Technology, Taipei.
Hsu, S. T., and Liao, H. J.(1998). “Uplift behavior of cylindrical anchors in sand.” Can. Geotech. J., 35(1), 70–80.
Liao, H. J., Ou, C. D., and Shu, S. C.(1996). “Anchorage behavior of shaft anchors in alluvial soil.” J. Geotech. Eng., 122(7), 526–533.
Meyerhof, G. G.(1956). “Penetration tests and bearing capacity of cohesionless soils.” J. Soil Mech. Found. Div., 82(SM1), 1–19.
Miura, S., and Toki, S.(1982). “A sample preparation method and its effect on static and cyclic deformation–strength properties of sand.” Soils Found., 22(1), 61–77.
Rowe, P. W.(1962). “The stress-dilatancy for static equilibrium of an assembly of particles in contact.” Proc. R. Soc. London, Ser. A, 269, 500–527.
Vardoulakis, I.(1980). “Shear band inclination and shear modulus of sand in biaxial test.” Int. J. Numer. Analyt. Meth. Geomech., 4, 103–109.
Vermeer, P. A., and deBorst, R.(1984). “Non-associated plastic for soils, concrete, and rock.” Heron, 29(3), 5–64.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Apr 9, 2001
Accepted: Jan 2, 2003
Published online: May 15, 2003
Published in print: Jun 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.