Model of Compaction Grouting
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 127, Issue 11
Abstract
Compaction grouting is an important soil improvement and underpinning technique that involves injection of a very stiff grout material into the soil. The objective is to displace and compact the surrounding soil without permeating or hydrofracturing it. Compaction grouting has been developed and used almost entirely on the basis of practical experience. The present study proposes a theoretical model that describes the mechanics of the compaction grouting process and rationally considers the different soil and grouting parameters that govern the overall design and performance of the method. The theoretical basis of the model draws from the theory of cavity expansion as well as the conical shear failure above the grout bulb. This model was validated using limited available data. The results indicate reasonable agreement and show a good potential of the proposed model for rationally optimizing the design of compaction grouting operations.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Baker, W. H., MacPherson, H. H., and Cording, E. ( 1981). “Compaction grouting to limit ground movements: Instrumented case history evaluation of the Bolton Hill Tunnels.” Tech. Rep. No. UMTA-MD-06-0036-81-1, U.S. Department of Transportation, Washington, D.C.
2.
Boulanger, R. W., and Hayden, R. F. (1995). “Aspects of compaction grouting of liquefiable soil.”J. Geotech. Engrg., ASCE, 121(12), 844–855.
3.
Brown, D. R., and Warner, J. (1973). “Compaction grouting.”J. Soil Mech. and Found. Div. ASCE, 99(8), 589–601.
4.
Graf, E. D. (1969). “Compaction grouting technique and observations.”J. Soil Mech. and Found. Div., ASCE, 95(5), 1151–1158.
5.
Graf, E. D. ( 1992). “Compaction grouting, 1992.” Grouting, soil improvement and geosynthetics, Geotech. Spec. Publ. No. 30, R. H. Borden, R. D. Holtz, and I. Juran, eds., Vol. 1, ASCE, New York, 275–287.
6.
Greenwood, D. ( 1987). “Underpinning by grouting.” Ground Engrg., London, 20(3), 21–32.
7.
Vesic, A. S. (1972). “Expansion of cavities in infinite soil mass.”J. Soil Mech. and Found. Div., ASCE, 98(3), 265–290.
8.
Vesic, A. S., and Clough, G. W. (1968). “Behavior of granular materials under high stresses.”J. Soil Mech. and Found. Div., ASCE, 94(3), 661–688.
9.
Vesic, A. S., Wilson, W. E., Clough, G. W., and Tai, T. L. ( 1965). “Engineering properties of nuclear craters.” Tech. Rep. No. 3-699, U.S. Army Engineer Waterway Experiment Station, Vicksburg, Miss.
10.
Warner, J. ( 1992). “Compaction grout; rheology vs. effectiveness.” Grouting, soil improvement and geosynthetics, Geotech. Spec. Publ. No. 30, R. H. Borden, R. D. Holtz, and I. Juran, eds., Vol. 1, ASCE, New York, 229–239.
11.
Warner, J., and Brown, D. R. (1974). “Planning and performing compaction grouting.”J. Geotech. Engrg. Div., ASCE, 100(6), 653–666.
12.
Wong, H. Y. ( 1971). “Compaction of soil during pressure grouting.” Private Rep., Cementation Research Ltd., Rickmansworth, Herts, England.
13.
Wong, H. Y. (1974). “Discussion of compaction grouting.”J. Geotech. Engrg. Div., ASCE, 100(5), 556–559.
14.
Yasufuku, N., and Hyde, A. F. L. ( 1995). “Pile end-bearing capacity in crushable sands.” Géotechnique, London, 45(4), 663–676.
Information & Authors
Information
Published In
History
Received: Jun 30, 2000
Published online: Nov 1, 2001
Published in print: Nov 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.