Air Permeability as Measure of Rock Mass Behavior
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 124, Issue 3
Abstract
The structural looseness and the permeability of rock have been found to be strongly correlated, and on-site measurement of permeability is shown to be a promising new method of detecting structural looseness of rock mass and hence the stability of nearby structures. The vacuum permeability test obtains the permeability by suction of air from a sealed test section. It has high sensitivity and fast response to a low permeable medium and is particularly suited for this purpose. The details of the method of measurement, hardware, and the data reduction methods developed so far are described. The loosening to be detected may be due to excavation of various types or to long-term deterioration of the surrounding ground due to natural processes. Practicality of the method is demonstrated by several sample field tests conducted at various sites.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Challenges and changes: Tunnelling activities in Japan 1994.” (1995). Tunnelling and Underground Space Technol., 10(2), 203–215.
2.
Figg, J. W.(1973). “Methods of measuring the air and water permeability of concrete.”Mag. of Concrete Res., 25(85), 213–219.
3.
“Geologic investigation and rock-mass measurements.” (1983). Japan Soc. of Civ. Engrs., 103–104.
4.
Jakubick, A. T., and Kline, R. (1987). “Multiparameter testing of permeability by transient vacuum technique.”Coupled processes associated with nuclear waste repositories, C. F. Tchen, ed., Academic Press, New York, N.Y., 473–484.
5.
“Kamioka mine.” (1984). Min. Mag., 151(5), 387–401.
6.
Lee, D. H., and Juang, C. H. (1988). “Use of permeability as an index to characterize internal structural changes and fracture mechanism.”Geotech. Testing J., 11(1).
7.
Mordecai, M., and Morris, L. W. (1971). “An investigation into the changes of permeability occurring in a sandstone when failed under triaxial stress condition.”Proc., 12th U.S. Symp. on Rock Mech., Am. Inst. Min. Met. Petrol. Engrs.
8.
Nakayama, A., and Kawatani, T. (1992). “Flow of compressible gas through porous media.”Proc., 5th Asian Congr. of Fluid Mech., 502–505.
9.
Nakayama, A., Kawatani, T., and Sakurai, S. (1993). “Scrutinizing the permeability test as a method of detecting loosened area in rock mass.”Proc., Assessment and Prevention of Failure Phenomena in Rock Engrg., 271–276.
10.
Nield, D. A., and Bejan, A. N. (1992). Convection in porous media. Springer-Verlag, New York, N.Y.
11.
Sakaguchi, T., Ito, Y., Sato, K., and Shimizu, T. (1992). “Fundamental study of gas seepage in rock and open-crack.”J. Japan Soc. of Civ. Engrs., (445/III-18) 17–25 (in Japanese).
12.
“The state of art of loading method—towards establishing guidelines.” (1988). Japan Soc. of Civ. Engrs., 88–90.
13.
Tuefel, L. W. (1987). “Permeability changes during shear deformation of fractured rock.”Proc., 18th U.S. Symp. on Rock Mech.
14.
Wyble, D. O. (1958). “The effects of applied pressure on the conductivity, porosity and permeability of sandstone.”Petr. Trans. AIMA, 213.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Mar 1, 1998
Published in print: Mar 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.