Stability of Uniformly Reinforced Slopes
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 123, Issue 6
Abstract
A limit analysis approach is applied to determine the amount of reinforcement necessary to prevent collapse of slopes due to reinforcement rupture, pullout, or direct sliding. The reinforcement is uniformly distributed over the height of the slope, and each layer of the primary reinforcement has the same length. A rigorous lower bound to the required reinforcement strength is calculated. This formulation is equivalent to that where a strict upper bound to the slope failure height is sought. The length of reinforcement is also calculated; both reinforcement pullout and direct sliding are accounted for. Design charts are produced for both the required reinforcement strength and its length. Although the emphasis is on the analytical considerations, the way results can be practically utilized is shown.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bishop, A. W., and Morgenstern, N. R.(1960). “Stability coefficients for earth slopes.”Géotechnique, London, England, 10(4), 129–150.
2.
Chen, W. F. (1975). Limit analysis and soil plasticity. Elsevier Science Publisher BV (North-Holland), Amsterdam, The Netherlands.
3.
Chen, W. F., Giger, M. W., and Fang, H. Y.(1969). “On the limit analysis of stability of slopes.”Soils and Found., 9(4), 23–32.
4.
de Buhan, P., Mangiavacchi, R., Nova, R., Pellegrini, G., and Salençon, J.(1989). “Yield design of reinforced earth walls by homogenization method.”Géotechnique, London, England, 39(2), 189–201.
5.
Drucker, D. C., Prager, W., and Greenberg, H. J.(1952). “Extended limit design theorems for continuous media.”Quarterly Appl. Math., 9(4), 381–389.
6.
Jewell, R. A. (1990). “Revised design charts for steep reinforced slopes.”Reinforced embankments, theory and practice, Thomas Telford, London, England, 1–30.
7.
Jewell, R. A. (1992). “Strength and deformation in reinforced soil design.”Proc., 4th Int. Conf. on Geotextiles, Geomembranes and Related Products, A. A. Balkema, Rotterdam, The Netherlands, 913–946.
8.
Leshchinsky, D., and Boedecker, R. H.(1989). “Geosynthetic reinforced soil structures.”J. Geotech. Engrg., ASCE, 115(10), 1459–1478.
9.
Michalowski, R. L.(1995). “Slope stability analysis: a kinematical approach.”Geotechnique, London, England, 45(2), 283–293.
10.
Michalowski, R. L. (1996). “Instability patterns of reinforced-soil structures.”Proc., Int. Symp. on Earth Reinforcement, Vol. 1, H. Ochiai, N. Yasufuku, and K. Omine, eds., A. A. Balkema, Rotterdam, The Netherlands, 809–813.
11.
Michalowski, R. L., and Zhao, A. (1994). “Effect of reinforcement length and distribution on safety of slopes.”Proc., 5th Int. Conf. on Geotextiles, Geomembranes and Related Products, Vol. 1, Int. Geotextile Soc., Singapore, 495–498.
12.
Michalowski, R. L., and Zhao, A.(1995). “Continuum versus structural approach to stability of reinforced soil.”J. Geotech. Engrg., ASCE, 121(2), 152–162.
13.
Sawicki, A., and Leśniewska, D. (1989). “Limit analysis of cohesive slopes reinforced with geotextiles.”Comp. and Geotech., 7(1 and 2), 53–66.
14.
Schmertmann, G. R., Chouery-Curtis, V. E., Johnson, R. D., and Bonaparte, R. (1987). “Design charts for geogrid-reinforced soil slopes.”Proc., Geosynthetics '87, Vol. 1, Industrial Fabrics Assn. Int., St. Paul, Minn., 108–120.
15.
Wright, S. G., and Duncan, J. M. (1991). “Limit equilibrium stability analyses for reinforced slopes.”Transp. Res. Rec. 1330, Transp. Res. Board, Washington, D.C., 40–46.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jun 1, 1997
Published in print: Jun 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.