Design of Highway Embankments Using Tire Chips
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 123, Issue 4
Abstract
This paper describes research undertaken to develop design procedures for using shredded scrap tires as a lightweight fill material in highway construction. The benefits of using scrap tires are particularly enhanced if they can be used to replace virgin construction materials made from nonrenewable resources. This paper addresses the use of tire chips as a highway embankment material. Design parameters for embankments constructed using discarded shredded tires are presented based on laboratory model studies, numerical analyses, and field performance of test fills. The conclusions of this report support the use of tire chips as an environmentally acceptable lightweight fill in highway applications if properly confined. Recommendations for design procedures and construction specifications for the use of tire chips in highway fills are provided.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
AASHTO guide for design of pavement structures. (1993). American Association of State Highway and Transportation Officials, Washington, D.C.
2.
ANSYS. (1996). ANSYS Engineering Analysis System, Swanson Analysis Systems, Inc., Houston, Pa.
3.
Asphalt-PASER manual: pavement surface evaluation and rating. (1989). Transportation Information Center, University of Wisconsin, Madison, Wis.
4.
Bosscher, P. J., Edil, T. B., and Eldin, N. N. (1992). “Construction and performance of a shredded waste-tire test embankment.”Transp. Res. Rec. No. 1345, Transportation Research Board, Washington, D.C., 44–52.
5.
Edil, T. B., and Bosscher, P. J. (1992). “Development of engineering criteria for shredded or whole tires in highway applications.”Final Rep. to Wisconsin Dept. of Transp. GT-92-9, Univ. of Wis., Madison, Wis.
6.
Edil, T. B., and Bosscher, P. J.(1994). “Engineering properties of tire chips and soil mixtures.”Geotech. Testing, ASTM, 17(4), 453–464.
7.
Gravel-PASER manual: pavement surface evaluation and rating. (1989). Transportation Information Center, University of Wisconsin, Madison, Wis.
8.
“How to `burn rubber' on a gravel road.”East Washingtonian, Jan. 31, 1996.
9.
Poulos, H. G., and Davis, E. H. (1974). Elastic solutions for soil and rock mechanics. John Wiley & Sons, Inc., New York, N.Y.
10.
“SHRP protocol P-46-Resilient modulus of unbound granular base, subbase materials and subgrade soils.” (1989). SHRP-LTPP laboratory material testing guide, version 1.0, P46-1-34, AASHTO, Washington, D.C.
11.
“Thickness design, asphalt pavements for highways and streets.” (1991). Manual Ser. No. 1, Asphalt Institute, Lexington, Ky.
12.
WisDOT standard specifications for road and bridge construction. (1989). State of Wisconsin Department of Transportation, Madison, Wis.
13.
Witczak, M. W., and Hwang, D. K. (1982). DAMA. Asphalt Institute, Lexington, Ky.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Apr 1, 1997
Published in print: Apr 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.