Void Fabric Tensor and Ultimate State Surface of Soils
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 123, Issue 2
Abstract
This paper presents a method to characterize the fabric of soils. Attention is focused on the directional distribution of voids in these materials. The mean porosity and void fabric tensor used in the description are obtained by the stereological technique. The use of a void fabric index to quantify the variation of the fabric tensor with deformation is highlighted. The fabric description is also used to expand the critical state soil mechanics framework. A proposal for an ultimate state surface of soils is made. The study shows that the representation of the ultimate state surface is dependent on the choice of the set of pertinent state variables. Its representation in reduced state dimensions may not be unique. The study further shows that the initiation of strain-softening in soils is the result of structural collapse of the solid skeleton. The use of the void fabric index to identify the initiation of collapse is explored.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ademcewicz, A. S. (1955). “Soil fabric changes during consolidation,” MS thesis, Washington State Univ., Pullman, Wash.
2.
Alarcon, A., and Leonards, G. A.(1988). “Discussion of `Liquefaction evaluation procedure' by Poulos et al.”J. Geotech. Engrg., ASCE, 114(2), 232–236.
3.
Alarcon, A., Chameau, J. L., and Leonards, G. A.(1988). “Undrained monotonic and cyclic strength of sands.”J. Geotech. Engrg., ASCE, 114(10), 1089–1109.
4.
Casagrande, A. (1936). “Characteristics of cohesionless soils affecting the stability of slopes and earth fills.”Contributions to soil mechanics 1925–1940, Boston Soc. of Civ. Engrs., Boston, Mass.
5.
Chameau, J. L., and Muhunthan, B. (1993). “Modeling granular fabric by tensors and their statistical test.”Proc., Int. Workshop on Prob. and Mat., North Atlantic Treaty Org., Brussels, Belgium.
6.
Curray, J. R.(1956). “Analysis of two-dimensional orientation data.”J. Geology, 64(1), 117–131.
7.
Delage, P., and Lefebvre, G.(1984). “Study of the structure of a sensitive Champlain clay and its evolution during consolidation.”Can. Geotech. J., 21(1), 21–35.
8.
Frost, J. D. (1989). “Studies on the monotonic and cyclic behavior of sands,” PhD thesis, Purdue Univ., West Lafayette, Ind.
9.
Hilliard, J. E. (1968). “Measurement of volume in volume.”Quantitative microscopy, R. T. DeHoff and F. N. Rhines, eds., McGraw-Hill Book Co., Inc., New York, N.Y.
10.
Ishihara, K.(1993). “Liquefaction and flow failure during earthquakes.”Geotechnique, London, England, 41(3), 351–415.
11.
Kantani, K.(1984). “Stereological determination of structural anisotropy.”Int. J. Engrg. Sci., 22(5), 531–546.
12.
Konrad, J. M.(1990). “Minimum undrained strength of two sands.”J. Geotech. Engrg., ASCE, 116(6), 932–947.
13.
Lecki, F. A., and Onat, E. T. (1981). “Tensorial nature of damage measuring internal variables.”Proc., IUTAM Symp. Phys. Nonlinearities in Struct., Senlis, Springer Verlag KG, Berlin, Germany.
14.
Leonards, G. A.(1955). “Strength characteristics of compacted clay.”Trans. ASCE, 120, 1420–1454.
15.
Leonards, G. A. (1985). “Discussion of `New developments in field and laboratory testing of soils' by Jamiolkowski et al.”Proc., 11th ICSMFE, San Francisco, Calif., Vol. 5, 220–222.
16.
McConnachie, I.(1974). “Fabric changes in consolidated kaolin.”Geotechnique, London, England, 24(2), 207–222.
17.
Mitchell, J. K. (1993). Fundamentals of soil mechanics. John Wiley & Sons, Inc., New York, N.Y.
18.
Muhunthan, B. (1991). “Micromechanics of steady state, collapse and stress-strain modeling of soils,” PhD thesis, Purdue Univ., West Lafayette, Ind.
19.
Muhunthan, B., and Alwail, T.(1992). “Use of image analysis in mathematical characterization of orientation data.”Scanning, 14, 291–297.
20.
Oda, M., Koishikawa, I., and Higuchi, T.(1978). “Experimental study of anisotropic shear strength of sand by plane strain test.”Soils and Found., Tokyo, Japan, 18(1), 25–38.
21.
Oda, M., Nemat-Nasser, S., and Mehrabadi, M. M.(1982). “A statistical study of fabric in a random assembly of spherical granulates.”Int. J. Num. Anal. Methods in Geomech., 6(1), 77–94.
22.
Oda, M., Nemat-Nasser, S., and Konishi, J.(1985). “Stress-induced anisotropy in granular masses.”Soils and Found., Tokyo, Japan, 25(3), 85–97.
23.
Poorooshasb, H. B. (1961). “The properties of soils and other granular media in simple shear,” PhD thesis, Cambridge Univ., Cambridge, U.K.
24.
Poorooshasb, H. B.(1989). “Description of flow of sand using state parameters.”Comp. and Geotech., 5, 195–218.
25.
Poulos, S. J. (1971). The stress-strain curves of soils. Geotechnical Engineers, Inc., Winchester, Mass.
26.
Poulos, S. J.(1981). “The steady state of deformation.”J. Geotech. Engrg., ASCE, 107(5), 553–562.
27.
Poulos, S. J., Castro, G., and France, J. W.(1985). “Liquefaction evaluation procedure.”J. Geotech. Engrg., ASCE, 111(6), 772–792.
28.
Roscoe, K. H., Schofield, A. N., and Wroth, P.(1958). “On the yielding of soils.”Geotechnique, London, England, 8(1), 22–53.
29.
Rothenburg, L. (1980). “Micromechanics of idealized granular systems,” PhD thesis, Carleton Univ., Ottawa, Canada.
30.
Sasitharan, S., Robertson, P. K., Sego, D. C., and Morgenstern, N. R.(1994). “State boundary surface for very loose sand and its practical implications.”Can. Geotech. J., 31(3), 321–334.
31.
Satake, M. (1982). “Fabric tensor in granular materials.”Proc., IUTAM Symp. on Deformation and Failure of Granular Mat., Delft, The Netherlands, 63–68.
32.
Schofield, A. N., and Wroth, C. P. (1968). Critical state soil mechanics. McGraw-Hill Book Co., Inc., New York, N.Y.
33.
Tobita, Y. (1987). “A micromechanical study on constitutive models of granular materials,” PhD thesis, Tohoku Univ., Sendai, Japan.
34.
Vaid, Y. P., Chung, E. K. F., and Kuerbis, R. H.(1990). “Stress path and steady state.”Can. Geotech. J., 27(1), 1–6.
35.
Wroth, C. P., and Basset, R. H.(1965). “A stress-strain relationship for the shearing behavior of a sand.”Geotechnique, London, England, 15(1), 32–56.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Feb 1, 1997
Published in print: Feb 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.