Static Load Tests of a Corrugated Steel Plate Arch with Relieving Slab
Publication: Journal of Bridge Engineering
Volume 13, Issue 4
Abstract
This paper deals with a new arch road bridge made from structural corrugated plates, over the Plawna Stream on a local road between Bystrzyca Klodzka and Ladek Zdroj in Stary Waliszow, Poland. The bridge replaced the old stone arch bridge destroyed during the flood of 1997. The steel bridge is founded on two continuous footings made of reinforced concrete. Its effective span is and clear height is . The results of tests carried out on the bridge under three static load schemes after of service are presented. The average values of the measured displacements and strains in selected points and elements of the steel shell structure were found to be considerably lower than the ones calculated for the same load. Since designs of this type are now commonly used for small and medium-size bridges, the conclusions drawn from the presented tests can be generalized to the whole class of such bridge structures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
D. Beben is a scholarship holder of the Foundation of Polish Science.
References
Abdel-Sayed, G., and Bakht, B. (1981). “Soil-steel structure design by the Ontario code: Part 2. Structural considerations.” Can. J. Civ. Eng., 8, 331–341.
Abdel-Sayed, G., Bakht, B., and Selig, E. T. (1992). “Soil-steel structures design by the third edition of OHBDC.” Can. J. Civ. Eng., 19, 545–550.
American Iron and Steel Institute (AISI). (1994). Handbook of steel drainage and highway construction products, 5th Ed., Chicago.
Bakht, B. (1981). “Soil-steel structure response to live loads.” J. Geotech. Engrg. Div., 107, 779–798.
Beben, D. (2002). “Tests of a road bridge made from Super Cor steel corrugated plates.” Proc., 3rd Conf. on Ph.D. Students of Civil Engineering Faculties, Gliwice-Wisla, Poland, 65–74.
Beben, D. (2005). “Soil-structure interaction in bridges made from steel corrugated plates.” Ph.D. thesis, Faculty of Civil Engineering, Opole University of Technology, Opole, Poland.
Beben, D., and Manko, Z. (2002a). “Tests of road bridge made from Super Cor steel corrugated plates.” Proc., 48th Scientific Conf. of Polish Academy of Sciences Civil Engineering Committee and Polish Association of Construction Engineers and Technicians Scientific Committee, Scientific and Research Building Engineering Problems, Vol. 4, Dolnoslaski Wydawnictwo Edukacyjne (DWE) (in Polish), Educational Lower Silesia Publisher, Wroclaw, Opole-Krynica, Poland, 167–174.
Beben, D., and Manko, Z. (2002b). “Use of steel corrugated-plate structures for quick rebuilding of bridges in crisis situations.” Proc., 12th Int. Scientific-Technical Military Engineering Conf. on Transport and Construction—Infrastructure in Crisis Situations, Wojskowa Akademia Techniczna (WAT) (in Polish), Military Technical Academy, Warszawa, Poland, 126–133.
Beben, D., and Manko, Z. (2003). “Static load tests of steel road bridge made from Multiplate steel corrugated plates.” Proc., 1st Scientific-Technical Symp. on Bridge Diagnostics and Tests, Opole, Post-Symp. Materials, Dolnoslaski Wydawnictwo Edukacyjne (DWE) (in Polish), Educational Lower Silesia Publisher, Wroclaw, Opole-Krynica, Poland, 71–96.
Madaj, A., Vaslestad, J., and Janusz, L. (1999). “In situ tests of steel corrugated-sheet culvert used for retrofitting railway frame overpass.” Proc., 9th Seminar on Modern Methods on Reinforcing and Retrofitting Bridges, Institute of Civil Engineering of Proznan University of Technology, Poznan-Kiekrz, Poland, 106–117.
Manko, Z., and Beben, D. (2005a). “Research on steel shell of a road bridge made of corrugated plates during backfilling.” J. Bridge Eng., 10(5), 592–603.
Manko, Z., and Beben, D. (2005b). “Tests during three stages of construction of a road bridge with a flexible load-carrying structure made of Super Cor type steel corrugated plates interacting with soil.” J. Bridge Eng., 10(5), 570–591.
Mirza, C., and Bakht, B. (1981). “Soil-steel structures design by the Ontario code. Part 1. General and geotechnical considerations.” Can. J. Civ. Eng., 8, 317–330.
Mirza, C., and Porter, W. A. (1981). “Construction considerations and controls for soil-steel bridge structures.” Can. J. Civ. Eng., 8, 519–534.
National Cooperative Highway Research Program (NCHRP). (2002). “Recommended specifications for large-span culverts.” Rep. No. 473, National Research Council and Transportation Research Board, Washington, D.C.
Polish Bridge Standards. (1977). “Concrete, reinforced concrete bridge structures. Requirements and tests.” PN-77/S-10040, Warszawa (Warsaw), Poland.
Polish Bridge Standards. (1982). “Bridge structures. Steel structures. Design.” PN-82/S-10052, Warszawa (Warsaw), Poland.
Polish Bridge Standards. (1985). “Bridge structures. Loads.” PN-85/S-10030, Warszawa (Warsaw), Poland.
Polish Bridge Standards. (1989). “Bridge structures. Steel structures. Requirements and tests.” PN-89/S-10050, Warszawa (Warsaw), Poland.
Polish Bridge Standards. (1991). “Bridge structures. Concrete, reinforced concrete and pre-stressed concrete structures. Design.” PN-91/S-10042, Warszawa (Warsaw), Poland.
Polish Bridge Standards. (1999). “Bridge objects. Reinforced concrete and concrete structures. Requirements and tests.” PN-S-10040:1999, Warszawa (Warsaw), Poland.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jan 23, 2007
Accepted: Aug 27, 2007
Published online: Jul 1, 2008
Published in print: Jul 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.