Assessment of Bridge Remaining Fatigue Life through Field Strain Measurement
Publication: Journal of Bridge Engineering
Volume 11, Issue 6
Abstract
With the aging of existing steel bridges and the accumulated stress cycles under traffic loads, assessment of remaining fatigue life for continuing service has become more important than ever, especially for decisions on structure replacement, deck replacement, or other major retrofits. Experience from engineering practice indicates that fatigue analysis based on specification loads and distribution factors usually underestimates the remaining fatigue life of existing bridges by overestimating the live load stress ranges. Fatigue evaluation based on field-measured stress range histograms under actual traffic load proves to be a more accurate and efficient method for existing bridges. This paper describes the application of such a method in assessing the remaining fatigue life of bridge structures. Current AASHTO specifications for fatigue evaluation of existing bridges are reviewed and compared. Case studies of three major highway bridges are discussed. Finally, a procedure is proposed for evaluating fatigue life of existing bridges through field strain measurement.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (1990). Guide specifications for fatigue evaluation of existing steel bridges, interim specifications in 1993 and 1995, Washington, D.C.
AASHTO. (2002). Standard specifications for highway bridges, 17th Ed., Washington, D.C.
AASHTO. (2003). Guide manual for condition evaluation and load and resistance factor rating (LRFR) of highway bridges, Washington, D.C.
AASHTO. (2004). AASHTO LRFD bridge design specifications, 3rd Ed., Washington, D.C.
American Railway Engineering and Maintenance-of-Way Association (AREMA). (2003). Manual for railway engineering, AREMA, Landover, Md.
Fisher, J. W., Jin, J., Wagner, D. C., and Yen, B. T. (1990). “Distortion-induced fatigue cracking in steel bridges,” NCHRP Rep. No. 336, Transportation Research Board, Washington, D.C.
Fisher, J. W., and Keating, P. B. (1989). “Distortion induced fatigue cracking of bridge details with web gaps.” J. Constr. Steel Res., 12, 215–228.
Keating, P. B., and Fisher, J. W. (1986). “Evaluation of fatigue tests and design criteria on welded details,” NCHRP Report 286, Transportation Research Board, Washington, D.C.
Massarelli, P. J., Zhou, Y. E., and Gomez, J. P. (1999). “Fatigue strength assessment of I-95 bridge over James River.” Proc., 1999 ASCE Structures Congress, ASCE, Reston, Va.
Miner, M. A. (1945). “Cumulative damage in fatigue.” J. Appl. Mech., 12(1), 159–164.
Moses, F., Schilling, C. G., and Raju, K. S. (1987). “Fatigue evaluation procedures for steel bridges.” NCHRP Rep. No. 299, Transportation Research Board, Washington, D.C.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Dec 9, 2004
Accepted: Apr 15, 2005
Published online: Nov 1, 2006
Published in print: Nov 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.