Torsional Design of Hybrid Concrete Box Girders
Publication: Journal of Bridge Engineering
Volume 11, Issue 3
Abstract
Hybrid concrete box-girder bridges that include prestressed slabs and corrugated steel webs provide a major improvement over traditional prestressed concrete box-girder bridges. To reduce the self-weight, high strength concrete is used for the top and bottom slabs and corrugated steel webs are employed for the webs. Because the weight of the girders has been reduced, the span length can be increased for more cost-effective design. A series of systematic tests on hybrid concrete box girders subjected to torsion has been performed. According to the test results, an analytical model was developed. Using the developed analytical model, a step-by-step procedure for torsional design of such bridges is presented in this article. Based on the design procedure proposed, a girder is designed by the analytical model and checked to satisfy structural codes.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The experimental data used as the basis of the design procedure presented in this paper was collected from the National Center for Research on Earthquake Engineering (NCREE) in Taiwan. The opportunity for collecting these data was funded by a grant from the National Science Foundation (NSF) for the 2002 Summer Program in Taiwan.
References
AASHTO. (1996). Standard specifications for highway bridges, 16th Ed., AASHTO, Washington, D.C.
American Concrete Institute (ACI). (2002). Building code requirements for structural concrete and commentary ACI 318-02 and ACI 318R-02, ACI, Detroit.
Belarbi, A., and Hsu, T. T. C. (1991). “Constitutive laws of reinforced concrete in biaxial tension-compression.” Research Rep. UHCEE 91-22, Univ. of Houston, Houston.
Cheyrezy, M., and Combault, J. (1990). “Composite bridges with corrugated steel webs—Achievements and prospects.” Proc., IABSE Symp. on Mixed Structures Including New Materials, International Association for Bridge and Structural Engineering, Zurich, Switzerland, 479–484.
Combault J. (1998). “The Maupre Viaduct near Charolles.” Proc., 1988 National Steel Construction Conf., American Institute of Steel Construction, Chicago.
Elgaaly, M., Hamilton, R. W., and Seshadri, A. (1996). “Shear strength of beams with corrugated webs.” J. Struct. Eng., 122(4), 390–398.
Elgaaly, M., and Seshadri, A. (1997). “Girders with corrugated webs under partial compressive edge loading.” J. Struct. Eng., 123(6), 783–791.
Elgaaly, M., Seshadri, A., and Hamilton, R. W. (1997). “Bending strength of steel beams with corrugated webs.” J. Struct. Eng., 123(6), 772–782.
Galambos, T. V. (1998). Guide to stability design criteria for metal structures, Wiley, New York.
Grimm, R., and Zink, M. (1992). “New bridge for high-speed trains.” Darmstadt Concrete, Institut fuer Massivbau, Technische Univ. Darmstadt, Vol. 7, 141–153.
Hsu, T. T. C. (1993). Unified theory of reinforced concrete, CRC, Boca Raton, Fla.
Hsu, T. T. C., and Mo, Y. L. (1985a). “Softening of concrete in torsional members—Theory and tests.” J. Am. Concr. Inst., 82(3), 290–303.
Hsu, T. T. C., and Mo, Y. L. (1985b). “Softening of concrete in torsional members—Prestressed concrete.“ J. Am. Concr. Inst., 82(5), 603–615.
Johnson, R. P., and Cafolla, J. (1997a). “Fabrication of steel bridge girders with corrugated webs.” Struct. Eng., 75(8), 133–135.
Johnson, R. P., and Cafolla, J. (1997b). “Local flange buckling in plate girders with corrugated webs.” Proc. Inst. Civ. Eng., Struct. Build., 123(May), 148–156.
Johnson, R. P., and Cafolla, J. (1997c). “Corrugated webs in plate girders for bridges.” Proc. Inst. Civ. Eng., Struct. Build., 123(May), 157–164.
Kondo, M., Shimizu, Y., Kobayashi, K., and Hattori, M. (1994). “Design and construction of the Shinkai Bridge—Prestressed concrete bridge using corrugated steel webs.” Bridge Found. Eng., 13–20 (in Japanese).
König, G., Duda, H., and Zink, M. (1994). “Neue Entwicklungen im Spannbetonbrückenbau (New developments in prestressed concrete bridges).” Beton-und Stahlbetonbau, 89(4), 85–89 (in German).
Mizuguchi, K., Ashizuka, K., Furuta, K., Ohura, T., Taki, K., and Kato, T. (1998). “Design and construction of the Hondani Bridge—PC bridge using corrugated steel webs.” Bridge Found. Eng., 2–9 (in Japanese).
Mo, Y. L., Jeng, C. H., and Chang, Y. S. (2000). “Torsional behavior of prestressed concrete box-girder bridges with corrugated steel webs.” ACI Struct. J., 97(6), 849–859.
Mo, Y. L., and Rothert, H. (1997). “Effect of softening models on behavior of reinforced concrete framed shearwalls.” ACI Struct. J., 94(6), 730–745.
Precast/Prestressed Concrete Institute (PCI). (1999). PCI design handbook, 5th Ed., PCI, Chicago.
Robinson, J. R., and Demorieux, J. M. (1972). Essais de traction-compression sur modeles d’ame de poutre en béton anne, Institut de Recherches Appliquees du Béton Armé, Paris.
Vecchio, F., and Collins, M. P. (1981). “Stress-strain characteristics of reinforced concrete in pure shear.” Proc., IABSE Colloquium on Advanced Mechanics of Reinforced Concrete, International Association for Bridge and Structural Engineering, Zurich, Switzerland, 211–225.
Yoda, T., and Ohura, T. (1993). “Torsional behavior of composite PC box girders with corrugated steel webs.” J. Japan. Soc. Civ. Eng., 39(3), 1251–1258.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Apr 6, 2004
Accepted: Apr 8, 2005
Published online: May 1, 2006
Published in print: May 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.