Evaluation of Low-Temperature Test Methods for Elastomeric Bridge Bearings
Publication: Journal of Bridge Engineering
Volume 7, Issue 1
Abstract
Elastomeric bearings have had an exemplary performance record over the past 40 years. Recently, increased testing requirements have been imposed that now make the testing of elastomeric bearings one of the major costs in constructing the supports. Currently, four low-temperature tests are required for elastomeric bearings. It is not clear whether all these tests are necessary or in fact even related to the actual performance of an elastomeric bridge bearing since some of these tests have been developed for other materials. Research was undertaken to evaluate the various tests and to determine whether they are important or even related to the performance of the bridge bearing. Tests were conducted on full-size natural rubber and neoprene bearings at low temperature subjected to compressive and shear forces, and factors such as testing speed and thermal conditioning were evaluated. As a result of the research, some test methods and performance requirements were found to have little impact on the bearing behavior, and others were overly conservative.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (1961). Standard specification for highway bridges, 8th Ed., Washington, D.C.
AASHTO. (1997). “Standard specification for plain and laminated elastomeric bridge bearings.” M251-97, Washington, D.C.
ASTM. (1992). “Standard test method for stiffness properties of plastics as a function of temperature by means of torsion test.” D1043-92, West Conshohocken, Pa.
ASTM. (1989). “Rubber property—Compression set.” D395-89, West Conshohocken, Pa.
ASTM. (1989). “Standard specification for plain and laminated elastomeric bearings for bridges.” D4014-89, West Conshohocken, Pa.
ASTM. (1995). “Standard test method for brittleness temperatureof plastics and elastomers by impact.” D746-95, West Conshohocken, Pa.
British Standards Institution (BSI). (1983). “Steel, concrete and composite bridges. Part 9: Bridge bearings.” BS5400, London.
British Standards Institution (BSI). (1996). “Structural bearings. Part 3: Elastomeric bearings.” prEN 1337-3, Draft Document, London.
Chen, R., and Yura, J. A. (1995). “Wax build-up on the surfaces of natural rubber bridge bearings,” Report No. 1304-4, Center for Transportation Research, Univ. of Texas, Austin, Tex.
E. I. du Pont de Nemours and Company (du Pont). (1959). Design of neoprene bearing pads, Wilmington, Del.
Eyre, R., and Stevenson, A. (1991). “Performance of elastomeric bridge bearings at low temperatures,” 3rd World Congress on Joint Sealing and Bearing Systems for Concrete Structures, American Concrete Institute, Toronto, 736–762.
Ontario Ministry of Transportation and Communications. (1991). Ontario highway bridge design code, 3rd Ed., Highway Engineering Division, Toronto, Ontario, Canada.
Roeder, C. W., Stanton, J. F., and Taylor, A. W. (1987). “Performance of elastomeric bearings.” NCHRP Report 298, National Cooperative Highway Research Program, Transportation Research Board, National Research Council, Washington, D.C.
Roeder, C. W., Stanton, J. F., and Feller, T. (1989). “Low temperature behavior and acceptance criteria for elastomeric bearings.” NCHRP Report 325, Transportation Research Board, National Research Council, Washington, D.C.
Yakut, A. (2000). “Performance of elastomeric bridge bearings at low temperatures.” PhD dissertation, Univ. of Texas, Austin, Tex.
Yura, J., Kumar, A., Yakut, A., Topkaya, C., Becker, E., and Collingwood, J. (2001). “Elastomeric bridge bearings: Recommended test methods.” NCHRP Report 449, Transportation Research Board, National Research Council, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Nov 14, 2000
Accepted: Apr 24, 2001
Published online: Jan 1, 2002
Published in print: Jan 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.