Load Distribution Factors for Composite Multicell Box Girder Bridges
Publication: Journal of Bridge Engineering
Volume 4, Issue 1
Abstract
Composite steel-concrete multicell box girder bridges combine excellent torsional stiffness with elegance. While the current design practices in North America recommend few analytical methods for the design of composite multicell box girder bridges, practical requirements in the design process necessitate a need for a simpler design method. This paper presents an extensive parametric study—using the finite-element method—in which 120 bridges of various geometries were analyzed. The parameters considered are: number of cells, number of lanes, span length, and cross bracings. Results from testing a simply supported three-cell bridge model is used to substantiate the analytical modeling. Based on the parametric study, moment and shear distribution factors are deduced for such bridges subjected to AASHTO truck loadings as well as dead load. Saint-Venant torsional stiffness for composite cellular cross sections used in this study is also investigated. Recommendations to enhance the torsional stiffness are formulated. An illustrative design example is presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Heins, C. P. ( 1978). “Box girder bridge design—state-of-the-art.” AISC Engrg. J., 2, 126–142.
2.
Hibbitt, H. D., Karlson, B. I., and Sorenson, E. P. ( 1996). ABAQUS version 5.5, finite-element program . Hibbitt, Karlson and Sorenson, Inc., Providence, R.I.
3.
NCHRP. ( 1991). “Distribution of wheel loads on highway bridges.” NCHRP 12-26/1, Transportation Research Board, National Cooperative Highway Research Program, Washington, D.C., Vol. 1 and 2.
4.
Nutt, R. V., Schamber, R. A., and Zokaie, T. ( 1988). Distribution of wheel loads on highway bridges. Transportation Research Board, NCHRP, Imbsen and Assoc. Inc., Sacramento, Calif.
5.
CHBDC. ( 1997). “Canadian highway bridge design code, draft.” Downsview, ON, Canada.
6.
Scordelis, A. C. ( 1975). “Analytical and experimental studies of multi-cell concrete box girder bridges.” Bull. Int. Assoc. of Shell and Spatial Struct., 58, 9–22.
7.
Scordelis, A. C., Chan, E. C., and Ketchum, M. A. ( 1985). “Computer program for prestressed concrete box girder bridges.” Rep. No. UCB/SESM 85/02, University of California, Berkeley, Berkeley, Calif.
8.
Sennah, K. M. ( 1998). “Load distribution and dynamic response of curved composite concrete deck-steel cellular bridges,” PhD dissertation, Dept. of Civ. and Envir. Engrg., University of Windsor, Canada.
9.
Siddiqui, A. H., and Ng, S. F. ( 1988). “Effect of diaphragms on stress reduction in box girder bridge sections.” Can. J. of Civ. Engrg., 15(1), 127–135.
10.
“Standard specifications for highway bridges.” (1996). AASHTO, Washington, D.C.
11.
Timoshenko, S. P. ( 1956). Strength of material, Part 2: Advanced theory and problems, 3rd Ed., Van Nostrand Reinhold, Princeton, N.J., 250–339.
Information & Authors
Information
Published In
Journal of Bridge Engineering
Volume 4 • Issue 1 • February 1999
Pages: 71 - 78
History
Received: Oct 3, 1997
Published online: Feb 1, 1999
Published in print: Feb 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.