Structural Deterioration Assessment for Steel Bridges
Publication: Journal of Bridge Engineering
Volume 2, Issue 3
Abstract
A rational approach for evaluating structural integrity of aged and deteriorated steel bridges—incorporating analytical, mechanical, and microstructural characterizations—is presented. Critical regions of built-up members, salvaged from decommissioned truss bridges, were identified using structural finite element analysis and the results guided the sampling process for microstructural analysis. A set of mechanical and metallurgical characterization procedures were designed to understand the mechanical history of critical sections of the structure. Observations made on the microstructure of a naturally stressed region revealed segregation of pearlite and MnS inclusions and flow of grains. The mechanical flow and microcracks observed in the stress-concentrated tensile region of the member indicate a high probability of eventual brittle failure of the material. Since stress-assisted aging seems to affect the microstructure, this may be used as a means of unobtrusive testing for susceptibility to failure. It follows that the microstructural analysis procedure, to detect stress-assisted aging and failure, may serve as a novel field-evaluation technique for aged steel structures.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Aktan, A. E., Lee, K. L., Naghavi, R., and Hebbar, K. (1994a). “Destructive testing of two 80-year-old truss bridges.”Transp. Res. Rec. 1460, Transp. Res. Board., Washington, D.C., 62–72.
2.
Aktan, A. E., Naghavi, R., Farhey, D. N., Lee, K. L., Aksel, T., and Hebbar, K. (1994b). “Nondestructive/destructive tests and associated studies on two decommissioned steel truss bridges.”Rep. FHWA/OH-95/013, Dept. of Transp., Infrastructure Inst., Univ. of Cincinnati, Cincinnati, Ohio.
3.
Boresi, A. P., and Chong, K. P. (1987). Elasticity in engineering mechanics. Elsevier Science Publishing Co., Inc., New York, N.Y.
4.
Fisher, J. W., Yen, B. T., and Wang, D.(1990). “Fatigue strength of riveted bridge members.”J. Struct. Engrg., ASCE, 116(11), 2968–2981.
5.
Guide specification for strength evaluation of existing steel and concrete bridges. (1989). Am. Assoc. of State Hwy. and Transp. Officials, Washington, D.C.
6.
I-DEAS master series II - user's manual. (1995). Structural Dynamics Research Corporation, Milford, Ohio.
7.
Kulicki, J. M., Prucz, Z., Sorgenfrei, F., and Mertz, D. R. (1990). “Guidelines for evaluating corrosion effects in existing steel bridges.”NCHRP Rep. No. 333, Transp. Res. Board, Nat. Res. Council, Washington, D.C.
8.
Liaw, D. G., and Yang, H. T. Y.(1989). “Reliability of randomly imperfect beam-columns.”J. Engrg. Mech., ASCE, 115(10), 2251–2270.
9.
Manual for maintenance inspection of bridges. (1983). Am. Assn. of State Hwy. and Transp. Officials, Washington, D.C.
10.
Out, J. M. M., Fisher, J. W., and Yen, B. T. (1984). “Fatigue strength of weathered and deteriorated riveted members.”Transp. Res. Rec. 950, Transp. Res. Board., Washington, D.C., 10–20.
11.
Standard specification for highway bridges. (1989). Am. Assoc. of State Hwy. and Transp. Officials, Washington, D.C.
12.
Standard test methods for determining average grain size; E112-85. (1985). ASTM.
13.
Test methods for tension testing of metallic materials (E8-94a). (1994). ASTM.
Information & Authors
Information
Published In
Journal of Bridge Engineering
Volume 2 • Issue 3 • August 1997
Pages: 116 - 124
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Aug 1, 1997
Published in print: Aug 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.