Geospatial Representation of River Channels
Publication: Journal of Hydrologic Engineering
Volume 10, Issue 3
Abstract
A geographic information system (GIS) approach for creating a three-dimensional (3D) topographic data set for straight or meandering river channels is presented. As input, the approach requires channel banklines, an initially arbitrary centerline, and a set of river bathymetry points. A curvilinear orthogonal -coordinate system that references data along and transverse to flow in the river channel is used. The methodology includes locating the channel centerline along the thalweg and then using it as a reference for assigning -coordinates to the bathymetric data. The resulting bathymetric data in the -coordinate system are used to create a square mesh, or FishNet, and this FishNet is then transformed back to the original -coordinates to get a flow-oriented 3D mesh. The resulting 3D mesh is a network of lines transverse to the flow (cross sections) and lines parallel to the flow (profile lines). The output thus provides a flow-oriented 3D representation of channel geometry that can be used for river habitat and hydraulic modeling.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was financially supported by the Texas Water Development Board (TWDB) under grant number 2002-483-439. We appreciate the assistance of Barney Austin and Tim Osting of TWDB for providing the data required for the study. We would also like to thank two anonymous reviewers and Janice Sylvestre for comments that led to improvement of the manuscript.
References
Bezier, Pierre E. (1993). “The first years of CAD/CAM and the UNISURF CAD system.” Fundamental developments of computer-aided geometric modeling, L. Piegl, ed., Academic, 13–26.
Chau, K. W., and Jiang, Y. W. (2001). “3D numerical model in orthogonal curvilinear and sigma coordinate system for Pearl River Estuary.” J. Hydraul. Eng., 127(1), 72–82.
Crowder, D. W., and Diplas, P. (2000). “Using two-dimensional hydrodynamic models at the scales of ecological importance.” J. Hydrol., 230(3–4), 172–191.
Environmental Science Research Institute (ESRI). (1999). Modeling our world. M. Zeiler, ed., ESRI Press, Redlands, Calif.
Environmental Science Research Institute (ESRI). (2001). Linear referencing and dynamic segmentation in ArcGIS 8.1, ESRI Press, Redlands, Calif.
French, J. R., and Clifford, N. J. (2000). “Hydrodynamic modeling as a basis for explaining estuarine environmental dynamics: Some computational and methodological issues.” Hydrolog. Process., 14(11–12), 2089–2108.
Fukuoka, S., and Sayre, W. W. (1973). “Longitudinal dispersion in sinuous channels.” J. Hydraul. Div., Am. Soc. Civ. Eng., 99(1), 195–217.
Holley, E. R., and Jirka, G. H. (1986). “Mixing in rivers.” Technical Report E-86-11, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss.
Johannesson, H., and Parker, G., (1989). River meandering, S. Ikeda and G. Parker, eds., Water Resources Monograph, Vol. 12, Washington D.C., 181–213.
Maidment, D. (2002). Arc Hydro-GIS for water resources, ESRI Press, Redlands, Calif.,
Nelson, J. M., and Dungan, J. S. (1989). River meandering, S. Ikeda and G. Parker, eds., Water Resources Monograph, Vol. 12, Washington D.C., 69–102.
Sinha S. K., Sotiropoulos, F., and Odgaard, A. J. (1998). “Three-dimensional numerical model for flow through natural rivers.” J. Hydraul. Eng., 124(1), 13–24.
Tate, E. C., Maidment, D. R., Olivera, F., and Anderson D. J. (2002). “Creating a terrain model for floodplain mapping.” J. Hydrologic Eng., 7, (2), 100–108.
U.S. Army Corps of Engineers (USACE). (2002). “HEC-RAS: River Analysis System.” Hydraulic Reference Manual, Version 3.1, Hydrologic Engineering Center, Davis, Calif.
U.S. Environmental Protection Agency (USEPA). 2002. Introduction to NHD and NHD load/unload workspace, ⟨http://www.epa.gov/owow/monitoring/georef/tutorial/exercise1c.html⟩.
Wadzuk, B., and Hodges, B. R. (2001). “Model bathymetry for sinuous, dendritic reservoirs.” Proc., 6th Int. Workshop on Physical Processes in Natural Waters, Univ., of Girona, Catalonia, Spain.
Waltuch, M., Cameron, E., Lafframboise, A., and Zeiler, M. (2001). Exploring ArcObjects Vol. 1—applications and Cartography, Michael Zeiler, ed. ESRI Press, Redlands, Calif. 1–3.
Ye, J., and McCorquodale, J. A. 1997. “Depth-averaged hydrodynamic model in curvilinear collocated grid.” J. Hydraul. Eng., 123(5), 380–388.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Jul 8, 2003
Accepted: May 29, 2004
Published online: May 1, 2005
Published in print: May 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.