Hydrology-Based Approach to Storm Water Detention Basin Design Using New Routing Schemes
Publication: Journal of Hydrologic Engineering
Volume 9, Issue 4
Abstract
The design of a storm water detention basin requires both hydrologic and hydraulic information. The basic hydrologic data include the inflow hydrograph and the allowable release. The hydraulic information of a basin requires prior knowledge of the basin geometry and outlet structures. With a known storage-outflow curve, the performance of the basin can be examined using a reservoir routing procedure. During the planning stage, a series of feasible basin sites is typically investigated for comparison and selection. During a feasibility study, the engineer faces a challenge as to how to derive the required storage-outflow curve when little hydraulic information is known. This paper presents a hydrology-based approach by which the storage-outflow curve can be approximated from the inflow hydrograph to the basin and the maximum allowable release from the basin. This hydrologic procedure significantly simplifies the storm water detention modeling technique and is a useful tool for regional drainage planning and alternative studies. In addition, this paper rearranges the continuity principle to derive two new reservoir routing functions. Both functions provide a direct solution using all variables at the same time step without iteration. The selection of routing functions is a matter of mathematical convenience.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASCE. (1994). Design and construction of urban stormwater management system, New York.
Bedient, P. B., and Huber, W. C. (1992). Hydrology and floodplain analysis, 2nd Ed., Addison-Wesley, New York.
Guo, J. C. Y.(1999). “Detention storage volume for small urban catchments.” J. Water Resour. Plan. Manage., 125(6), 380–382.
Guo, J. C. Y.(2001). “Rational hydrograph method for small urban watersheds.” J. Hydrologic Eng., 6(4), 352–356.
Guo, J. C. Y., and Urbonas, B.(1996). “Maximized detention volume determined by runoff capture rate.” J. Water Resour. Plan. Manage., 122(1), 33–39.
Guo, J. C. Y., and Urbonas, B.(2002). “Runoff capture and delivery curves for storm-water quality control designs.” J. Water Resour. Plan. Manage., 128(3), 208–215.
Hydrologic Engineering Center (HEC). (1980). Hydrologic analysis of ungauged watersheds with HEC-1, U.S. Army Corps of Engineers, Davis, Calif.
Malcom, H. R. (1982). “Some detention design ideals.” Proc., Conf. on Stormwater Detention Facilities, W. DeGroot, ed., ASCE, New York, 138–145.
McCuen, R. H. (1998). Hydrologic analysis and design, 2nd Ed., Prentice-Hall, New York.
Puls, L. G. (1928). “Construction of flood routing curves.” House Document 185, U.S. 70th Congress, First Session, Washington, D.C.
Urban Storm water design criteria manual. (2001). Vols. 1–2, Urban Drainage and Flood Control District, Denver.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Sep 27, 2002
Accepted: Nov 10, 2003
Published online: Jun 15, 2004
Published in print: Jul 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.