Ecology Ditch: A Best Management Practice for Storm Water Runoff Mitigation
Publication: Journal of Hydrologic Engineering
Volume 8, Issue 3
Abstract
A full-scale physical model of a modified infiltration trench was constructed to test a new storm water best management practice called an ecology ditch. The ditch was constructed using compost, sand, and gravel, and a perforated drain pipe. A series of 14 tests were conducted on the physical model. The tests controlled rainfall application and overland roadway runoff amounts and monitored outflow from the discharge pipe. The objectives were to increase the time to peak and reduce the peak discharge coming out of the pipe. The results were also used to calibrate a modified existing unsaturated two-dimensional groundwater flow code. After the code was calibrated, computer simulations were performed to determine the effects of storm size, rainfall distribution, constant rainfall application, media type, initial conditions, and the physical size of the ecology ditch. The simulations used 24-hour duration storm sizes of 0.64, 1.27, 2.54, 3.81, 5.08, and 6.35 cm (0.25 to 2.5 in.). Peak reduction was found to depend greatly on input hydrograph distribution and the ability of the soil to store water. In turn, the storage in the soil was found to be dependent on the intensities of the input hydrograph. The peak delay time for larger storms was quantifiable since it depended on the saturated hydraulic conductivity and the distance of the flow path. For larger storms, the ecology ditch managed a peak reduction in the range of 10 to 50%.
Get full access to this article
View all available purchase options and get full access to this article.
References
Driscoll, E., Shelley, P. E., and Strecker, E. W. (1990). Pollutant loadings and impacts from highway stormwater runoff, Volumes I–IV, FHWA/RD-88-006-9, Federal Highway Administration, Woodward-Clyde Consultants, Oakland, Calif.
Duchene, M.McBean, E. A., and Thomson, N. R.(1994). “Modeling of infiltration from trenches for storm-water control.” J. Water Resour. Plann. Manage. Div., Am. Soc. Civ. Eng., 120(3), 276–293.
Ellis, J. B., Harrop, D. O., and Revitt, D. M.(1986). “Hydrological controls of pollutant removal from highway surfaces.” Water Res., 20(5), 589–595.
Federal Highway Administration (FHA). (1996). “Evaluation and management of highway runoff water quality.” Pub. No. FHWA-PD-96-032, U.S. Department of Transportation, Washington, D.C., June.
Fetter, C. W. (1994). Applied hydrogeology, 3rd Ed., Macmillan College Pub. Col., New York.
Harper, H. H., Yousef, Y. A., and Wanielista, M. P.(1984). “Efficiency of roadside swales in removing heavy metals for highway associated nonpoint source runoff.” Am. Water Resour. Assoc.,20(1), 129–137.
Harrington, B. W. (1989). “Design and construction of infiltration trenches.” Proc., Urban Runoff Water Quality Control, ASCE, New York, 290–304.
Hewitt, C. N., and Rahed, M. B.(1992). “Removal rates of selected pollutants in the runoff waters from a major rural highway.” Water Res., 26(3), 311–319.
Hillel, D. (1982). Introduction to soil physics, Academic, New York.
King, S. (1997). “Hydraulic performance of the ecology ditch: A best management practice for the treatment of highway runoff.” Master of Science thesis, Dept. of Civil and Environmental Engineering, Washington State Univ., Pullman, Wash.
Koob, T. L. and Barber, M. E. (1999). “WSDOT BMP’s for stormwater runoff in confined spaces.” Washington State Department of Transportation Research Rep. T9902-17, Draft Final, Olympia, Wash.
Newberry, G. P., and Yonge, D. R. (1996). “The retardation of heavy metals in stormwater runoff by highway grass strips.” Washington State Department of Transportation Research Rep., WA-RD 404.1, Olympia, Wash.
Rawls, W. J. L., Ajuja, R., and Brakensiek, K. L. (1992). “Estimating soil hydraulic properties from soil data.” Indirect methods for estimating the hydraulic properties of unsaturated soils, van Genutchen et al., eds., Univ. of California, Riverside, Calif.
Schueler, T. R. (1987). “Controlling urban runoff: A practical manual for planning and designing urban BMPs.” Dept. of Environmental Programs, Metropolitan Washington Council of Governments, Washington, D.C.
Simunek, J., Vogel, T., and van Genutchen, M. Th. (1994). “The SWMS_2D code for simulating water flow and solute transport in two-dimensional variably saturated media, version 1.2.” Research Rep. No. 132, U.S. Salinity Laboratory Agricultural Research Service, U.S. Dept. of Agriculture, Riverside, Calif.
Urbonas, B., and Stahre, P. (1993). Stormwater: Best management practices and detention for water quality, drainage and CSO management, Prentice-Hall, Englewood Cliffs, N.J.
Wilson, G. V., Jardine, P. M., and Gwo, J. P.(1992). “Modeling the hydraulic properties of a multiregion soil.” Soil Sci. Soc. Am. J., 56, 1731–1737.
Yang, C. T. (1996). Sediment transport: Theory and practice, McGraw-Hill, New York.
Information & Authors
Information
Published In
Journal of Hydrologic Engineering
Volume 8 • Issue 3 • May 2003
Pages: 111 - 122
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Feb 19, 1999
Accepted: Nov 15, 2002
Published online: Apr 15, 2003
Published in print: May 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.