Ductile Design of Glued-Laminated Timber Beams
Publication: Practice Periodical on Structural Design and Construction
Volume 14, Issue 3
Abstract
Ductility is a fundamental component in the design of robust structures. For timber structures, the unfavorable material characteristics pose particular problems to its realization. Two approaches for improving the post-elastic behavior of glued-laminated timber beams have been investigated by testing and numerical analysis. The first is based on forming mixed beams with suitably assembled lamellae of different strength class; in the second, steel reinforcement is used. Satisfactory results have been obtained mixing laminations of different grade, whether from a single species or from different species, as long as the strengths of the lamellae are well differentiated. Steel-reinforced timber beams require taking special provisions in order to develop a ductile bending behavior, because material irregularities induce brittle failure of wood in tension before the steel bars may yield. Positive results were obtained, specifically preventing local failure modes, by releasing tension stresses in wood, by inserting small-diameter steel screws, or with a suitably balanced distribution of steel area. Steel reinforcement seemed once more capable of providing a simple and reliable solution.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers thank Dr. Gaetano Castro of “Istituto di Sperimentazione per la Pioppicoltura,” Casale Monferrato, Italy, Mr. Franco Paganini, IVALSA, and Ing. Alessandro Fontanari for their important contribution to the realization of this research. The partial financial support of the Provincia Autonoma di Trento, Project CoDuLe (Ductile Behavior of Timber) and of the ReLUIS-DPA (Italian Emergency Management Agency) 2005–2008 Project is gratefully acknowledged.
References
American Institute of Timber Construction. (1996). Standard specifications for structural glued laminated timber of hardwood species, AITC 119-96, Englewood, Colo.
American Institute of Timber Construction. (2004). Standard specifications for structural glued laminated timber of softwood species, AITC 117-2004, Englewood, Colo.
Bazan, I. M. (1980). “Ultimate bending strength of timber beams.” Ph.D. thesis, Nova Scotia Technical College, Halifax, Canada.
Biblis, E. J. (1966). “Design considerations for laminated wood beams composed of two species.” For. Prod. J., 16(7), 39–51.
Brunner, M., and Schnüringer, M. (2002). “Towards a future with ductile timber beams.” Proc., 7th World Conference on Timber Engineering, WCTE (CD-ROM), Shah Alam, Selangor Darul Ehsan, Malaysia.
Bulleit, W. M., Sandberg, L. B., and Woods, G. J. (1989). “Steel-reinforced glued-laminated timber.” J. Struct. Eng., 115(2), 433–444.
Castro, G., and Paganini, F. (2003). “Mixed glued-laminated timber of Poplar and Eucalyptus grandis clones.” Holz Roh-Werkst., 61(4), 291–298.
Coleman, G. E., and Hurst, H. T. (1974). “Timber structures reinforced with light gage steel.” For. Prod. J., 24(7), 45–53.
Del Senno, M., Piazza, M., and Tomasi, R. (2004). “Axial glued-in steel-timber joints—Experimental and numerical analysis.” Holz Roh-Werkst., 62(2), 137–146.
Dempsey, D. D., and Scott, D. W. (2006). “Wood members strengthened with mechanically fastened FRP strips.” J. Compos. Constr., 10(5), 392–398.
European Committee for Standardization (CEN). (1995). “Timber structures. Structural timber and glued-laminated timber. Determination of some physical and mechanical properties.” EN 408, CEN, Brussels, Belgium.
European Committee for Standardization (CEN). (1999). “Timber structures—Glued-laminated timber—Strength classes and determination of characteristic values.” EN 1194, CEN, Brussels, Belgium.
European Committee for Standardization (CEN). (2004). “Eurocode 5: Design of timber structures. Part 1-1: General rules and rules for the buildings.” EN 1995–1-1, CEN, Brussels, Belgium.
Gentile, C., Svecova, D., and Rizkalla, S. H. (2002). “Timber beams strengthened with GFRP Bars: Development and applications.” J. Compos. Constr., 6(1), 11–20.
Götz, K. H., Hoor, D., Möhler, K., and Natterer, J. (1980). “Eislaufhalle in bad Reichenhall.” Holzbau atlas, Institut für internationale Architektur-Dokumentation GmbH, Munchen, Germany, 84.
Hoyle, R. J., Jr. (1975). “Steel-reinforced wood beam design.” For. Prod. J., 25(4), 17–23.
Lantos, G. (1970). “The flexural behavior of steel reinforced laminated timber beams.” Wood Sci., 2(3), 136–143.
Moody, R. C. (1974). Design criteria for larger structural glue-laminated timber beams using mixed species of visual graded lumber, Forest Products Laboratory, U.S. Dept. of Agriculture, Forest Service, Madison, Wis.
National design specification for wood construction (NDS). (2005). American Forest and Paper Association, Washington D.C.
O’Halloran, M. R. (1973). “A curvilinear stress-strain model for wood in compression.” Ph.D. thesis, Colorado State University, Fort Collins, Colo.
Parisi, M. A., and Piazza, M. (2003). “Rehabilitation of timber structures by new materials and connectors.” Proc., 10th Conf. on Structural Faults and Repair (CD-ROM), Commonwealth Institute, London.
Parisi, M. A., and Piazza, M. (2007). “Restoration and strengthening of timber structures: Principles, criteria, and examples.” Pract. Period. Struct. Des. Constr., 12(4), 177–185.
Plevris, N., and Triantafillou, T. (1992). “FRP-reinforced wood as structural material.” J. Mater. Civ. Eng., 4(3), 300–317.
Sliker, A. (1963). “Reinforced wood laminated beams.” For. Prod. J., 12(12), 91–96.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Apr 21, 2008
Accepted: Jan 15, 2009
Published online: Jul 15, 2009
Published in print: Aug 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.