Optimal Design for Automatic Control of On-Demand Canal Systems
Publication: Journal of Infrastructure Systems
Volume 3, Issue 2
Abstract
A methodology is developed for the design of an automatic gate controller for an on-demand canal system. The design is based on the EL-FLO plus RESET control concept developed previously by the U.S. Bureau of Reclamation. Two additional design parameters are included in this study to ensure a smooth upstream gate operation. The basic design parameters are optimized to achieve a stable flow condition in the entire canal system where multiple gates are operated to supply water to meet unexpected turnout demands along the canal. Due to the complexity involved in canal hydraulics, the optimization model is highly nonlinear. Decomposition allied with successive approximations is used for solution. The proposed design methodology, when applied to a section of the Caraibas Project in northeastern Brazil, showed that the proposed methodology is successful in minimizing hydraulic transients in a multipool canal system. A sensitivity analysis of the optimal design is conducted with respect to maximum demand level and the two new design parameters.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Balogun, O. S., Hubbard, M., and DeVries, J. J.(1988). “Automatic control of canal flow using linear quadratic regulator theory.”J. Hydr. Engrg., ASCE, 114(1), 75–102.
2.
Burt, C. M. (1987). “Overview of canal control concepts.”Planning, operation, rehabilitation and automation of irrigation water delivery systems, D. D. Zimbelman, ed., ASCE, New York, N.Y., 81–109.
3.
Burt, C. M., and Parrish III, J. B. (1990). “Canal automation for flexibility on sloping canals.”Irrig. and Drain.; Proc., 1990 Nat. Conf., ASCE, New York, N.Y., 137–144.
4.
Buyalski, C. P., and Serfozo, E. A. (1979). “Electronic filter level offset (EL-FLO) plus RESET equipment for automatic downstream control of canal.”Rep., Bureau of Reclamation, Denver, Colo.
5.
Buyalski, C. P., Ehler, D. G., Falvey, H. T., Rogers, D. C., and Serfozo, E. A. (1991). Canal systems automation manual, Volume 1. Bureau of Reclamation, Denver, Colo.
6.
Chen, Y. H. (1973). “Modeling of water and sediment routine in natural channels,” PhD dissertation, Dept. of Civ. Engrg., Colorado State Univ., Fort Collins, Colo.
7.
Chevereau, G., and Schwartz-Benezeth, S. (1987). “BIVAL system for downstream control.”Planning, operation, rehabilitation and automation of irrigation water delivery system, D. D. Zimbelman, ed., ASCE, New York, N.Y., 155–163.
8.
Clemmens, A. J., and Replogle, J. A.(1987). “Mechanical-hydraulic dual-action controller for canal level or discharge rate.”J. Irrig. and Drain. Engrg., ASCE, 113(1), 69–85.
9.
Clemmens, A. J., and Replogle, J. A.(1989). “Control of irrigation canal networks.”J. Irrig. and Drain. Engrg., ASCE, 115(1), 96–110.
10.
Flynn, L. E., and Marino, M. A.(1987). “Optimal aqueduct capacity and distribution policy: continuous approach.”J. Water Resour. Plng. and Mgmt. Div., ASCE, 113(4), 533–549.
11.
Hancu, S., and Dan, P.(1992). “Wave-motion stability in canals with automatic controllers.”J. Hydr. Div., ASCE, 118(12), 1621–1638.
12.
Marino, M. A., and Flynn, L. E.(1987). “Optimal aqueduct capacity and distribution policy: discrete approach.”J. Water Resour. Plng. and Mgmt. Div., ASCE, 113(4), 550–562.
13.
Murtaugh, B. A., and Saunders, M. A. (1995). “MINOS 5.4 user's guide.”Tech. Rep. SOL 83-20R, Dept. of Operation Res., Stanford Univ., Stanford, Calif.
14.
Ploss, L. F. (1987). “Canal automation using the electronic filter level offset (EL-FLO) method.”Planning, operation, rehabilitation and automation of irrigation water delivery system, D. D. Zimbelman, ed., ASCE, New York, N.Y., 164–175.
15.
Rodellar, J., Gomez, M., and Bonet, L.(1993). “Control method for on-demand operation of open-channel flow.”J. Irrig. and Drain. Engrg., ASCE, 119(2), 225–240.
16.
Rosenbrock, H. H.(1960). “An automatic method for finding the greatest or least value of a function.”Comp. J., 3, 175–184.
17.
Schuurmans, J. (1992). “Controller design for a regional downstream controlled canal.”Rep., Delft Univ. of Technol., Lab. for Measurement and Control, Holland.
18.
Tucci, C. (1978). “Hydraulic and water quality model for a river network,” PhD dissertation, Colorado State Univ., Fort Collins, Colo.
19.
Yeh, W. W-G.(1985). “Reservoir management and operation models: a state-of-the-art review.”Water Resour. Res., 21(12), 1797–1818.
20.
Yeh, W. W-G., Becker, L., Toy, D., and Graves, A. L.(1980). “Central Arizona projects: operations model.”J. Water Resour. Plng. and Mgmt. Div., ASCE, 106(2), 521–540.
21.
Zimbelman, D. D., and Bedworth, D. D.(1983). “Computer control for irrigation-canal system.”J. Irrig. and Drain. Engrg., ASCE, 109(1), 43–59.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jun 1, 1997
Published in print: Jun 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.