Geotechnical Physical Modeling for Education: Learning Theory Approach
Publication: Journal of Professional Issues in Engineering Education and Practice
Volume 132, Issue 4
Abstract
As physical modeling sees increasing use in geotechnical engineering education, there is a need for a strategic approach for integrating this powerful simulation technique into courses in a way that ensures the greatest benefit for students. For this reason, a learning theory approach, which recognizes the natural learning cycle of students, has been developed. The approach is based on a modified version of the learning theorist David Kolb’s “theory of experiential learning.” The approach emphasizes a variety of learning styles and thus is appealing to a broad range of students. The approach is relatively easy to apply to traditional geotechnical engineering coursework and requires only a modest effort to adopt. It is expected that by using this approach when designing course modules, instructors can increase the likelihood that comprehensive learning will take place. While this paper focuses on physical modeling for geotechnical engineering, the approach presented here has educational applications to an array of other civil engineering topics.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support for this research was provided by the U.S. National Science Foundation under Grant No. CMS-0134370. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the writer and do not necessarily reflect the views of the National Science Foundation.
References
About Learning. (2003). “Teaching matters.” Electronic newsletter, Wauconda, Ill.
Andersen, K. H., Jeanjean, P., Luger, D., and Jostad, H. P. (2003). “Centrifuge test on installation of suction anchors in soft clay.” Proc., Deepwater Mooring Systems: Concepts, Design, Analysis, and Materials, ASCE, Reston, Va., 13–27.
Anagnos, T., and Fratta, D. (2004). “Development of the education, outreach, and training program for the NEES collaboratory.” Proc., 13th World Conf. on Earthquake Engineering, Vancouver, Canada, 1038.
Becker, D. E., Burwash, W. J., Montgomery, R. A., and Liu, Y. (1998). “Foundation design aspects of the Confederation Bridge.” Can. Geotech. J., 35(5), 750–768.
Bodner, G. M. (1986). “Constructivism: A theory of knowledge.” J. Chem. Educ., 63, 873–878.
Bucher, F. (2000). “Demonstration models for undergraduate teaching geotechnics.” Proc., 1st Int. Conf. on Geotechnical Engineering Education and Training, Balkema, Rotterdam, The Netherlands, 325–328.
Caicedo, B. (2000). “Geotechnical centrifuge applications to foundation engineering teaching.” Proc., 1st Int. Conf. on Geotechnical Engineering Education and Training, Balkema, Rotterdam, The Netherlands, 271–274.
Coduto, D. P. (2001). Foundation design: Principles and practices, Prentice–Hall, Upper Saddle River, N.J.
Collins, B., Znidarcic, D., and Goddery, T. (1997). “A new instructional geotechnical centrifuge.” Geotech. News, 15(3), 32–34.
Craig, W. H. (1989). “Use of a centrifuge in geotechnical engineering education.” Geotech. Test. J., 12(4), 288–291.
Culligan, P. J., Barry, D. A., and Parlange, Y.-Y. (1996). “Scaling unstable infiltration in the vadoze zone.” Can. Geotech. J., 34(3), 466–470.
Culligan, P. J., and Nepf, H. M. (2002). “Use of models in K-12 education.” Proc., Workshop on the Role of Geotechnical Physical Modelling in Education, St. Johns, Canada, ⟨http://www.c-core.ca/icpmg/Culligan.pdf⟩ (April 10, 2005).
Dewoolkar, M. M., Goddery, T., and Znidarcic, D. (2003). “Centrifuge modeling for undergraduate geotechnical engineering instruction.” Can. Geotech. J., 26(2), 201–209.
Felder, R. M., and Silverman, L. K. (1988). “Learning and teaching styles in engineering education.” Eng. Educ., 78(7), 674–681.
Ferguson, E. S. (1992). Engineering and the mind’s eye, MIT Press, Cambridge, Mass.
Freire, P. (1973a). Education for critical consciousness, Continuum International, New York.
Freire, P. (1973b). Pedagogy of the oppressed, Harper and Row, New York.
Garnier, J. (2002). “Properties of soil samples used in centrifuge models.” Proc., Physical Modelling in Geotechnics: ICPMG ’02, St. Johns, Canada, 5–19.
Guo, P., Phillips, R., and Popescu, R., eds. (2002). Proc., Physical Modelling in Geotechnics: ICPMG ’02, St. Johns, Canada.
Harb, J. N., Durrant, S. O., and Terry, R. E. (1993). “Use of the Kolb learning cycle and the 4MAT system in engineering education.” J. Eng. Educ., 82(2), 70–77.
Healey, M., and Jenkins, A. (2000). “Kolb’s experiential learning theory and its application in geography in higher education.” J. Geography, 99(5), 185–195.
Iai, S. (1989). “Similitude for shaking table tests on soil-structure-fluid model in lg gravitational field.” Soils Found., 29(1), 105–118.
Jeffs, T., and Smith, M. K. (1999). Informal education. Conversation, democracy and learning, Ticknall: Education Now Books, Ticknall, U.K.
Kolb, D. A. (1981). “Learning styles and disciplinary differences.” The modern American college, Jossey-Bass, San Francisco.
Kolb, D. A. (1984). Experiential learning: Experience as the source of learning and development, Prentice–Hall, Englewood Cliffs, N.J.
Kolb, D. A. (1985). Learning style inventory, Rev. Ed., Mcber, Boston.
Kolb, D. A. (1999). Learning style inventory, Version 3 Ed., Hay/Mcber, Boston.
Kolb, D. A., and Fry, R. (1975). “Toward an applied theory of experiential learning.” Theories off group process, C. Cooper, ed., Wiley, London.
Kutter, B. L. (1995). “Recent advances in centrifuge modeling of seismic shaking.” Proc., 3rd Int. Conf. on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, St. Louis, 927–941.
Madabhushi, S. P. G., and Take, W. A. (2002). “Use of a mini-drum centrifuge for teaching of geotechnical engineering.” Proc., Physical Modelling in Geotechnics: ICPMG’02, St. Johns, Canada, 221–228.
McCarthy, B. (1987). The 4MAT system: Teaching to learning styles with right/left mode techniques, EXCEL, Barrington, Ill.
Mezirow, J. (1978). “Perspective transformation.” Adult Education, 28(2), 100–110.
Mitchell, R. J. (1994). “Centrifuge modeling as a teaching tool.” Geotech. News, 12(3), 30–32.
Mitchell, R. J. (1998). “The eleventh annual R.M. Hardy keynote address, 1997: Centrifugation in geoenvironmental practice and education.” Can. Geotech. J., 35(4), 630–640.
NEES Cyberinfrastructure Center. (2006). ⟨http://it.nees.org⟩ (July 26, 2006).
Newson, T. A., Bransby, M. F., and Kainourgiaki, G. (2002). “The use of small centrifuges for geotechnical education.” Proc., Physical Modelling in Geotechnics: ICPMG ’02, St. Johns, Canada, 215–220.
O’Sullivan, D. W., and Copper, C. L. (2003). “Evaluating active learning.” J. Coll. Sci. Teach., 32(7), 448–452.
Paulin, M., Elgamal, A.-W., Kutter, B., Phillips, R., and Townsend, F. (1993). “Centrifuge modeling.” Geotech. News, 15(3), 31.
Phillips, R., and Goodings, D. (2002). “Workshop on the use of physical modeling for engineering education.” ⟨www.c-core.ca/icpmg/educwkshp.htm⟩ (April 10, 2005).
Rogers, A. (1996). Teaching adults, Open University Press, Berkshire, U.K.
Santamarina, J. C., and Goodings, D. J. (1989). “Centrifuge modeling: A study of similarity.” Geotech. Test. J., 12(2), 63–166.
Schofield, A. N., and Steedman, R. S. (1988). “State-of-the-art report: Recent development on dynamic model testing in geotechnical engineering.” Proc., 9th World Conf. on Earthquake Engineering, Tokyo, 813–824.
Sharp, J. E., Harb, J. N., and Terry, R. E. (1997). Combining Kolb learning styles and writing to learn in engineering classes.” J. Eng. Educ., 86(2), 93–101.
Smith, D. M., and Kolb, D. A. (1986). User’s guide for the learning style inventory: A manual for teachers and trainers, McBer, Boston.
Stice, J. E. (1987). “Using Kolb’s learning cycle to improve student learning.” Eng. Educ., 77(5), 291–296.
Svinicki, M. D., and Dixon, N. M. (1987). “The Kolb model modified for classroom activities.” College Teaching, 35(4), 141–146.
Tennant, M. (1997). Psychology and adult learning, Routledge, London.
Terashi, M., Katagiri, M., and Ohishi, K. (2004). “Ten years centrifuge operation at a consulting firm.” Int. J. Physical Mod. Geotechnics, 4(1), 1–10.
Wankat, P. C. (2001). The effective, efficient professor: Teaching scholarship and service, Allyn & Bacon, Boston.
Wankat, P. C., and Oreovicz, F. S. (1993). Teaching engineering, McGraw–Hill, New York.
Willcoxson, L., and Prossser, M. (1996). “Kolb’s learning style inventory (1985): Review and further study of validity and reliability.” Br. J. Educ. Psychol., 66(2), 251–261.
Wood, D. M., Crewe, A., and Taylor, C. (2002). “Shaking table testing of geotechnical models.” Int. J. Physical Mod. Geotechnics, 2(1), 1–13.
Yang, D., Naesgaard, E., Byrne, P. M., Adalier, K., and Abdoun, T. (2004). “Numerical model verification and calibration of George Massey Tunnel using centrifuge models.” Can. Geotech. J., 41(5), 921–942.
Znidarcic, D., and Ko, H.-Y. (2005). “Instruction in centrifuge laboratory.” ⟨http://bechtel.colorado.edu/web/grad/geotech/faci/centrifuge/iccentrifuge.html⟩ (April 10, 2005).
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Apr 25, 2005
Accepted: Jul 14, 2005
Published online: Oct 1, 2006
Published in print: Oct 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.