Should Engineering Schools Address Environmental and Occupational Health Issues?
Publication: Journal of Professional Issues in Engineering
Volume 113, Issue 2
Abstract
Over the past 15 years, society has developed an expectation that engineers, as practitioners and managers, are aware of those activities over which they have control and which could adversely affect the public's well‐being. Specifically, due to incidents such as Love Canal, Times Beach, Bhopal, and Chernobyl, and the pollution of groundwater, the public now recognizes that technology, which is within the control of others, can, if mishandled, jeopardize the health and well‐being of thousands of innocent people. This realization will undoubtedly place increasing pressures on engineers to be more aware of the potential adverse consequences of their work. This paper discusses why schools of engineering have a responsibility to prepare engineers to meet these expectations and recommends an approach to meeting this challenge. An undergraduate engineering course applicable to all disciplines, which would help fill this gap, is discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Institute of Chemical Engineers (1984). “What's the Cost of a Lost Workday?” Chem. Engrg. 91, Sept. 17, 31–32.
2.
American Institute of Chemical Engineers (1985). “Chemical Plant Safety: AIChE lans Center to Study Issues.” Chem. Engrg. News. April 29, 6–8.
3.
Ashford, N. A. (1977). “Don't ignore legal and ethical concerns in job health safety.” Occupational Health and Safety, 46, Mar./Apr., 24–29.
4.
Barrons Magazine (1987). “Polluters Beware! EPA is Taking the Gloves Off.” Jan. 2, 44–46.
5.
Bentkover, J. D., Covello, V. T., and Mumpower, J. (1986). Benefits assessment: the state of the art. D. Reidel Pub., Boston, Mass.
6.
Brandt, P. (1937). Industrial hygiene engineering. McGraw‐Hill, New York, N.Y.
7.
Chanlett, E. (1979). Environmental protection. 2nd ed. McGraw‐Hill, New York, N.Y.
8.
Corn, M. (1978). “The impact of federal regulations on engineers.” Chem. Engrg. Prog. 74, July, 24–27.
9.
DeVries, D. (1984). “Samuel Florman's dynamic tension,” IEEE Tech. and Science 3, 21–22.
10.
Efron, E. (1984). The apocalyptics. Simon and Schuster, New York, N.Y.
11.
Eisenbud, M. (1978). Environment, technology and health. New York University Press, New York, N.Y.
12.
First, M. W. (1983). “Engineering control of occupational health hazards.” Amer. Ind. Hyg. Assn. J. 44, Sept., 621–626.
13.
Flores, A. (1983). “Safety in design: An ethical viewpoint.” Chem. Engrg. Prog. 9, Nov., 11–14.
14.
Florman, S. C. (1981). Blaming technology: The irrational search for scapegoats. St. Martin's Press, New York, N.Y.
15.
Flowers, B. D. (Chairman) (1976). Royal Commission on the Environment. 6th Report: Nuclear Power and the Environment. Her Majesty's Stationary Office, London, England.
16.
Gunn, A., and Vesilind, P. A. (1986). Environmental ethics for engineers. Lewis Pub., New York, N.Y.
17.
Hammer, W. (1981). “Engineers can be hazardous to your health.” Trial. 17, 20–23.
18.
Harding, C. F., and Canfield, D. T. (1936). Legal and ethical phases of engineering. McGraw‐Hill, New York, N.Y.
19.
Hughson, R. V., and Kohn, P. M. (1980). “Perplexing problems in engineering ethics.” Chem. Engrg. 87, 132–138.
20.
Jaske, R. T. (1978). “The growing federal involvement in the engineering profession.” Chem. Engrg. Prog. 74, Aug., 22–25.
21.
Kardestuncer, H. (1980). Social consequences of engineering. Boyd and Fraser Publishers, San Francisco, Calif.
22.
Kletz, T. (1984). “Safety in design.” Chemical Engrg. Prog. 80, Mar., 13–14.
23.
Lowrance, W. W. (1976). Of acceptable risk: Science and the determination of safety. William Kaufmann, Inc., Los Altos, Calif.
24.
Lowrance, W. W. (1983). “The agenda for risk decision making.” Environment. 25, 4–8.
25.
Lowrance, W. W. (1985). Modern science and human values. Oxford University Press, New York, N.Y.
26.
McCord, C. P. (1931). Industrial hygiene for engineers and managers. Harper Brothers Pub., New York, N.Y.
27.
Mingle, J. O., and Reagan, C. E. (1980). “Legal and moral responsibilities of the engineer.” Chem. Engrg. Prog. 76, Dec., 15–23.
28.
National Safety Council. (1985). Accident facts. Chicago, Ill.
29.
Nelson, D. B. (1982). “Safety and health awareness: What does industry expect of new chemical engineering graduates?” Plant operations progress. 1, 114–116.
30.
O'Keefe, B. J. (1985). Shooting ourselves in the foot. Houghton‐Mifflin Co., New York, N.Y.
31.
Orefice, P. (1985). “Science and Lawyers.” Chem. Tech. Mar., 136–37.
32.
Paustenbach, D. J. (1983). “The engineer's responsibility in occupational disease prevention.” Industrial hygiene aspects of plant engineering. Lewis and Lester Cralley, Eds. (1984). Vol. II, Chap. II, MacMillan Pub., New York, N.Y.
33.
Paustenbach, D. J. (1984a). “Risk assessment and engineering in the 1980's.” Mech. Engrg. 106, 54–59.
34.
Paustenbach, D. J. (1984b). “The need to educate engineers in occupational safety and health: A proposal.” Prof. Safety. 29, 15–23.
35.
Paustenbach, D. J., and Dufour, J. T. (1984). “The engineer's role in protecting human health—Legal aspects.” Mech. Engrg. 106, 62–69.
36.
Peters, G. A. (1979). “New product safety legal requirements.” Prof. Safety. 24, 39–42.
37.
Reuth, N. (1978). “Law and the engineer.” Mech. Engrg. 100, Feb., 46–51.
38.
Ruckelshaus, W. D. (1983). “Better safe than sorry,” Environ. Health Letter. Nov. 15, 1.
39.
Starr, C. (1969). “Social benefits vs. technological risks.” Sci. 165, Sept., 1232–1237.
40.
Stewart, W. T., and Paustenbach, D. J. (1984). “Ethical decision making for engineers and managers.” Ind. Engrg. 16, Apr., 47–55.
41.
Talty, J. T. (Ed.) (1979). Proc. NIOSH/University Occupational Health Engineering Control Technology Workshop. National Institute for Occupational Safety and Health (NIOSH), National Technical Information Service, Springfield, Va.
42.
Talty, J. T. (Ed.) (1982). Proc. 2nd NIOSH/University Occupational Health Engineering Control Technology Workshop. National Institute for Occupational Safety and Health (NIOSH), National Technical Information Service, Springfield, Va.
43.
Talty, J. (1985). “Integrating health and safety into engineering curricula.” Engrg. Educ. Dec., 136–139.
44.
Timmerhaus, K. (1984). “Occupational safety and health in engineering schools. What should be done?” speech presented at Conference for Engineering Educators. Purdue University, West Lafayette, Ind., Oct.
45.
Unger, S. H. (1982). Controlling technology: Ethics and the responsible engineer. Holt, Rinehart and Winston, New York, N.Y.
46.
Urquhart, J., and Heilman, K. (1985). Risk watch: The odds of life. Facts on File Publications, New York, N.Y.
47.
Von Hovenberg, J. (1934). Malaria control for engineers. ASCE, New York, N.Y.
48.
Wattenberg, B. J. (1984). The good news is the bad news is wrong. Simon and Schuster, New York, N.Y.
49.
Whelan, E. (1985). Toxic terror. Wiley Pub., New York, N.Y.
50.
Wilson, R. (1978). “A rational approach to reducing cancer risk.” New York Times. July 7, 7.
51.
Zimmerman, N. J., Paustenbach, D. J., and Rogers, W. J. (1982). “A new technique for educating engineers in occupational safety and health.” Presented at 90th Annual Conference, American Society for Engineering Education, College Station, Tex., June.
Information & Authors
Information
Published In
Journal of Professional Issues in Engineering
Volume 113 • Issue 2 • April 1987
Pages: 93 - 111
Copyright
Copyright © 1987 ASCE.
History
Published online: Apr 1, 1987
Published in print: Apr 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.