Electrical Resistivity, Pulse Velocity, and Compressive Properties of Carbon Fiber-Reinforced Cement Mortar
Publication: Journal of Materials in Civil Engineering
Volume 20, Issue 2
Abstract
The electrical resistivity and mechanical properties of carbon fiber-reinforced cement mortar (CFRCM) were investigated. Both cylindrical and prism specimens were used in this investigation to determine the effects of size and shape of specimen on the physical and mechanical properties of the CFRCM systems. Carbon fiber loading was varied up to 6% (w/w), and water-to-cement ratios (w/c) of 0.5 and 1 were used. The specific electrical resistivity of the plain mortar with w/c ratio of 1 was reduced to and upon increasing the carbon fiber content to 1 and 6% (w/w), respectively. The percolation theory was used to represent the variation of the electrical specific resistivity with fiber content in the cement mortar. Increasing the w/c ratio decreased the strength and toughness of the CFRCM composites. Increasing the fiber content increased the peak strain and toughness, but decreased the Young’s modulus and electrical resistivity of cement mortar composites. Pulse velocity tests showed that the specimen shape also affected the dynamic Young’s modulus, dynamic shear modulus, and the dynamic Poisson’s ratio. The compression strength of the CFRCM was influenced by the w/c ratio and the fiber content. A model was used to predict the compressive stress-strain behavior of different CFRCM systems, and relations between static and dynamic properties have been developed. Empirical relations were developed to relate the specific electrical resistivity to unit weight, Young’s modulus, and pulse velocity.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was supported by the Center for Innovative and Grouting Materials (CIGMAT) with funding from various industries.
References
ASTM. (1994). “Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression.” C 469-94e1, West Conshohocken, Pa.
ASTM. (1998). “Standard practice for capping cylindrical concrete specimens.” C 617-98, West Conshohocken, Pa.
ASTM. (2001). “Standard test method for compressive strength of cylindrical concrete specimens.” C 39M-01, West Conshohocken, Pa.
ASTM. (2002). “Standard test method for pulse velocity through concrete.” C 597, West Conshohocken, Pa.
Balaguru, P., and Ezeldin, A. (1987). “Behavior of partially prestressed beams made with high strength fiber reinforced concrete.” Fiber reinforced concrete properties and applications, SP-105, American Concrete Institute, Detroit, 419–436.
Carmona, F., Canet, R., and Delhaes, P. (1987). “Piezoresistivity of heterogeneous solids.” J. Appl. Phys., 61(7), 2550–2557.
Chen, P., and Chung, D. D. L. (1993). “Carbon fiber reinforced concrete for smart structures capable of nondestructive flaw detection.” Smart Mater. Struct., 2, 22–30.
Chung, D. D. L. (1999). “Carbon fiber cement-matrix composites.” TANSO Rep. No. 190, 300–312.
Chung, D. D. L. (2000). “Cement reinforced with short carbon fibers: A multifunctional material.” Composites, Part B, 31(1), 511–526.
Chung, D. D. L. (2001). “Continuous carbon fiber polymer-matrix composites and their joints, studied by electrical measurements.” Polym. Compos., 22(2), 250–270.
Chung, D. D. L. (2002). “Piezoresistive cement-based materials for strain sensing.” J. Intell. Mater. Syst. Struct., 13(9), 599–609.
CIGMAT. (2000). “Standard test method for compressive properties of polymer concrete.” PC 5–00, Center for Innovative Grouting Materials and Technology, University of Houston, Houston, Tex.
Dani, A. (1994). “Electrical percolation in short fiber composites.” Proc., 26th Int. SAMPE Technical Conf., October, 689–699.
Hahne, H., Karl, S., and Worner, J. (1987). “Properties of polyacrylonitrile fiber reinforced concrete.” Fiber reinforced concrete properties and applications, SP-105, American Concrete Institute, Detroit, 211–223.
Krenchel, H., and Shah, S. (1987). “Restrained shrinkage tests with Pp-fiber reinforced concrete.” Fiber reinforced concrete properties and applications, SP-105, American Concrete Institute, Detroit, 141–158.
Leslie, J. R., and Chessman, W. J. (1949). “An ultrasonic method of studying deterioration and cracking in concrete structures.” J. Am. Concr. Inst., 21(1), 17–35.
Mantrala, S. K., and Vipulanandan, C. (1995). “Nondestructive evaluation of polyester polymer concrete.” ACI Mater. J., 92(6), 660–668.
McLachlan, D., Blaszkiewicz, M., and Newnham, R. (1990). “Electrical resistivity of composites.” J. Am. Ceram. Soc., 73(8), 2187–2203.
Mei, Z., and Guerrero, V. (2002). “Mechanical damage and strain in carbon thermoplastic-matrix composite, sensed by electrical resistivity measurement.” Polym. Compos., 17(3), 425–432.
Nagy, A. (1997). “Determination of E-modulus of young concrete with nondestructive method.” J. Mater. Civ. Eng., 9(1), 15–20.
Ogale, A. A., and Wang, S. F. (1993). “Simulation of the percolation behavior of quasi- and transversely isotropic short-fiber composites with a continuum model.” Compos. Sci. Technol., 46, 379–388.
Ohama, Y., and Nishimura, T. (1979). “Properties of steel fiber reinforced polyester resin concrete.” Proc., 22nd Congress on Material Research, Society of Material Sciences, Kyoto, Japan, 364–367.
Rafeeq, A., Gupta, A., and Krishnamoorthy, S. (2000). “Influence of steel fibers in fatigue resistance of concrete in direct compression.” J. Mater. Civ. Eng., 12(2), 172–179.
Ramakrishnan, V., Gollapudi, S., and Zellers, R. (1987). “Performance characteristics and fatigue strength of polypropylene fiber reinforced concrete.” Fiber reinforced concrete properties and applications, SP-105, American Concrete Institute, Detroit, 159–177.
Reza, F., Baston, G. B., Yamamuro, J. A., and Lee, J. S. (2001). “Volume electrical resistivity of carbon fiber cement composites.” ACI Mater. J., 98(1), 25–35.
Sett, K. (2003). “Characterization and modeling of structural and self-monitoring behavior of fiber reinforced polymer concrete.” MS thesis, Univ. of Houston.
Sett, K., and Vipulanandan, C. (2004). “Properties of polyester polymer concrete with glass and carbon fibers.” ACI Mater. J., 101(1), 30–41.
Shui, X., and Chung, D. D. L. (1996). “A piezoresistive carbon filament polymer-matrix composite strain sensor.” Smart Mater. Struct., 5(1), 243–246.
Sood, V., and Gupta, S. (1987). “Behavior of steel fibrous concrete beam-column connections.” Fiber reinforced concrete properties and applications, SP-105, American Concrete Institute, Detroit, 437–474.
Strumpler, R., and Glatz-Reicnenbach, J. (1999). “Conducting polymer composites.” J. Electroceram., 3(4), 329–346.
Ueda, N., and Taya, M. (1986). “Prediction of the electrical conductivity of the two-dimensionally misoriented short fiber composites by a percolation model.” J. Appl. Phys., 60(1), 459–461.
Vipulanandan, C., and Paul, E. (1990). “Performance of epoxy and polyester polymer concrete.” ACI Mater. J., 87(3), 241–251.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Nov 30, 2004
Accepted: Apr 5, 2007
Published online: Feb 1, 2008
Published in print: Feb 2008
Notes
Note. Associate Editor: Zhishen Wu
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.