Linearized Approach for Predicting Thermal Stresses in Asphalt Pavements due to Environmental Conditions
Publication: Journal of Materials in Civil Engineering
Volume 20, Issue 2
Abstract
Temperature fluctuations in asphalt pavements significantly affect pavement stability and the selection of asphalt grading. Ability to accurately predict asphalt pavement temperatures at different depths and horizontal locations based on environmental conditions will greatly help pavement engineers, not only in the selection of the asphalt grade to be used in various pavement lifts, but also in the accurate assessment of thermal stresses in and between various asphalt lifts. This is especially critical when the asphalt pavement is exposed to extreme freeze and thaw conditions. In this paper, a simulation model is proposed that uses a transient, two-dimensional finite difference approach to calculate the temperature distribution in asphalt pavements in response to hourly thermal environmental conditions and to calculate associated thermal stresses. Previous attempts to determine thermal stresses in asphalt sections range from correlations of observed cracking to ambient environmental conditions, to detailed numerical solutions of stress equations. The difficulty lies in adequately describing rheological properties of asphalt as a function of temperature. This paper uses the stiffness index to estimate the thermal stress distribution in asphalt pavements, and preliminary thermal stress maps during seasonal and diurnal freeze/thaw cycles are presented. Simulation results show that the greatest thermal stresses are observed in cases where pavement lifts have dissimilar thermal properties.
Get full access to this article
View all available purchase options and get full access to this article.
References
Adkins, D. F., and Merkley, G. P. (1990). “Mathematical model of temperature changes in concrete pavements.” J. Transp. Eng., 116(3), 349–358.
Ali, H. A., and Lopez, A. (1996). “Statistical analyses of temperature and moisture effects on pavement structural properties based on seasonal monitoring data.” Transportation Research Record. 1540, Transportation Research Board, Washington, D.C., 48–55.
Anderson, D. A., Lapalu, L., Marasteanu, M. O., LeHir, Y. M., Planche, J. P., and Martin, D. (2001). “Low-temperature thermal cracking of asphalt binders as ranked by strength and fracture properties.” Transportation Research Record. 1766, Transportation Research Board, Washington, D.C., 1–6.
ASHRAE. (2001). ASHRAE handbook, fundamentals, American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., Atlanta.
Boutin, G., and Lupien, C. (2000). “Thermal cracking of asphalt pavement.” Proc., 2nd Eurasphalt and Eurobitume Congress, Book II, Barcelona, Spain, 45–59.
Chadbourn, B. A., Newcomb, D. E., Voller, V. R., DeSombre, R. A., Louma, J. A., and Timm, D. H. (1998). “An asphalt paving tool for adverse conditions.” Final Rep. No. MN-RC-1998-18, Minnesota Dept. of Transportation.
Choubane, B., and Tia, M. (1995). “Analysis and verification of thermal-gradient effects on concrete pavement.” J. Transp. Eng., 121(1), 75–81.
Duffie, J. A., and Beckman, W. A. (1991). Solar engineering of thermal processes, 2nd Ed., Wiley, New York.
Harik, I. E., Jianping, P., Southgate, H., and Allen, D. (1994). “Temperature effects on rigid pavements.” J. Transp. Eng., 120(1), 127–143.
Hills, J. F. (1974). “Predicting the fracture of asphalt mixes by thermal stress.” Institute of Petroleum.
Incropera, F. P., and DeWitt, D. P. (2001). Fundamentals of heat and mass transfer, 5th Ed., Wiley, New York.
Ioannides, A. M., and Khazanovich, L. (1998). “Nonlinear temperature effects on multilayered concrete pavements.” J. Transp. Eng., 124(2), 128–136.
Irvine, T. F., Jr., and Liley, P. E. (1984). Steam and gas tables with computer equations, Academic.
Kuo, C. M. (1998). “Effective temperature differential in concrete pavements.” J. Transp. Eng., 124(2), 112–116.
Liang, R. Y., and Niu, Y. Z. (1998). “Temperature and curling stress in concrete pavements: Analytical solutions.” J. Transp. Eng., 124(1), 91–100.
Marrero, T. R., and Mason, E. A. (1972). “Gaseous diffusion coefficients.” J. Phys. Chem. Ref. Data, 1:3–118.
Masad, E., Taha, R., and Muhunthan, B. (1996). “Finite-element analysis of temperature effects on plain-jointed concrete pavements.” J. Transp. Eng., 122(5), 388–398.
Mills, A. F. (1995). Basic heat and mass transfer, Prentice-Hall.
Nishizawa, T., Shimeno, S., Komatsubara, A., and Koyanagawa, M. (1998). “Study on thermal stresses in continuously reinforced concrete pavement.” Transportation Research Record. 1629, Transportation Research Board, Washington, D.C., 99–107.
Pane, I., Hansen, W., and Mohamed, A. R. (1998). “Three-dimensional finite element study on effects of nonlinear temperature gradients in concrete pavements.” Transportation Research Record. 1629, Transportation Research Board, Washington, D.C., 58–66.
Shalaby, A., Abd El Halim, A. O., and Easa, S. M. (1996). “Low-temperature stresses and fracture analysis of asphalt overlays.” Transportation Research Record. 1539, Transportation Research Board, Washington, D.C., 132–139.
Shen, W., and Kirkner, D. J. (2001). “Thermal cracking of viscoelastic asphalt-concrete pavement.” J. Eng. Mech., 127(7), 700–709.
Yavuzturk, C., Chiasson, A. D., and Ksaibati, K. (2005), “Assessment of temperature fluctuations in asphalt pavements due to thermal environmental conditions using a two-dimensional, transient finite-difference approach.” J. Mater. Civ. Eng., 17(4), 465–475.
Yavuzturk, C., and Ksaibati, K. (2002). “Assessment of temperature fluctuations in asphalt pavements due to thermal environmental conditions using a two-dimensional, transient finite difference approach.” Research Rep. No. MPC 02-136, Mountain Plains Consortium.
Yavuzturk, C., and Ksaibati, K. (2006). “Assessment of thermal stresses in asphalt pavements due to environmental conditions.” Research Rep. No. MPC 06-181, Mountain Plains Consortium.
Yoder, E. J., and Witczak, M. W. (1975). Principles of pavement design, 2nd Ed., Wiley, New York.
Yu, H. T., Khazanovich, L., Darter, M. I., and Ardani, A. (1998). “Analysis of concrete pavement responses to temperature and wheel loads measured from instrumented slabs.” Transportation Research Record. 1639, Transportation Research Board, Washington, D.C., 94–101.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jan 13, 2006
Accepted: Jun 21, 2007
Published online: Feb 1, 2008
Published in print: Feb 2008
Notes
Note. Associate Editor: Mary Stroup-Gardiner
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.